journal article·2012-09

Effect of Hyperbaric Chamber Gas on Transformation Texture of the API-X70 Pipeline Weld Metal

Amin S. Azar, Erling Østby, Odd M. Akselsen

Publisher page

Abstract

The development of the texture components in the X70 weld metal under several shielding environments was investigated using the electron-backscattered diffraction (EBSD) and orientation imaging microscopy (OIM) techniques. A new method for assigning the reference direction (RD), transverse direction (TD), and normal direction (ND) was introduced based on the morphological orientation of the grains. The analyses showed that different shielding gases affect the weld metal texture and microstructure. The shielding environment with pure argon shows the highest orientational pole density values and dominant acicular ferrite microstructure. It was observed that the distribution of misorientation angle and special coincidence site lattice (CSL) grain boundaries play significant roles in determining the tensile characteristics of the weld samples. Moreover, the bainite lattice orientation was found dependent on the directional heat flow unlike the other detected constituents.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A. Haldar, S. Suwas, and D. Bhattacharjee: Microstructure and Texture in Steels and Other Materials, Springer, Jamshedpur, India, 2009.10.1007/978-1-84882-454-6 ↗
2. S. Kou: Welding Metallurgy, 2nd ed., Wiley, New York, NY, 1987.
3. L.E. Svensson: Control of Microstructures and Properties in Steel ARC Welds, CRC Press, Boca Raton, FL, 1994.
4. W.W. Mullins and R.F. Sekerka: Appl. Phys., 1963, vol. 34, pp. 323–29.10.1063/1.1702607 ↗
5. K.A. Jackson: Solidification, ASM, Materials Park, OH, pp. 121–50.
6. D.M. Herlach: Mater. Sci. Eng.: R: Reports, 1994, vol. 12, nos. 4,5, pp. 177–272.10.1016/0927-796X(94)90011-6 ↗
7. M. Rappaz, S.A. David, J.M. Vitek, and L.A. Boatner: Metall. Trans. A, 1989, vol. 20A, pp. 1125–38.10.1007/BF02650147 ↗
8. T. Zacharia, J.M. Vitek, A.J. Goldak, T. DebRoy, M. Rappaz, and H.K.D.H. Bhadeshia: Modell. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 265–88.10.1088/0965-0393/3/2/009 ↗
9. S.A. Davis, J.M. Vitek, and T.L. Hebble: Weld. J., 1987, vol. 66, no. 10, pp. S289–300.
10. A. Kluken, Ø. Grong, and J. Hjelen: Metall. Trans. A, 1991, vol. 22A, pp. 657–63.10.1007/BF02670288 ↗
11. G. Kurdjumov and G. Sachs: Zeitschrift für Physik, 1930, vol. 64, pp. 325–43.10.1007/BF01397346 ↗
12. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Carlton House Terrace, IOM Communications Limited, London, U.K., 2001
13. S.S. Babu and H.K.D.H. Bhadeshia: Mater. Sci. Eng: A, 1992, vol. 156, no. 1, pp. 1–9.10.1016/0921-5093(92)90410-3 ↗
14. J.M. Gregg and H.K.D.H. Bhadeshia: Acta Metall. Mater., 1994, vol. 42, no. 10, pp. 3321–30.10.1016/0956-7151(94)90464-2 ↗
15. N. Stenbacka and K.A. Persson: Weld. J., 1989, vol. 68, no. 11, pp. 41–47.
16. U.F. Kocks, C.N. Tomé, and H.-R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, U.K., 2000.
17. O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, CRC Press, Boca Raton, FL, 2000.
18. A. Haldar, D. Bhattacharjee, and S. Suwas: Microstructure and Texture in Steels: and Other Materials, Springer, London, U.K., 2009.10.1007/978-1-84882-454-6 ↗
19. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Butterworths, London, U.K., 1993.
20. X.H. Ha, S.W. Jang, W.H. Bang, U.S. Yoon, and K.H. Oh: Mater. Sci. Forum, 2002, vols. 408–412, pp. 1377–82.10.4028/www.scientific.net/MSF.408-412.1377 ↗
21. H. Yu: University of Science and Technology Beijing, 2008, vol. 15 (6), pp. 184–88.10.1016/S1005-8850(08)60271-6 ↗
22. Y. Zhong, F. Xiao, J. Zhang, Y. Shan, W. Wang, and K. Yang: Acta Mater., 2006, vol. 54, no. 2, pp. 435–43.10.1016/j.actamat.2005.09.015 ↗
23. R.A. Farrar and P.L. Harrison: J. Mater. Sci., 1987, vol. 22, no. 11, pp. 3812–20.10.1007/BF01133327 ↗
24. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, J. Hartmann, and S.G. Jansto: Mater. Sci. Eng. A, 2008, vol. 478, nos. 1–2, pp. 26–37.10.1016/j.msea.2007.06.003 ↗
25. V. Venegas, F. Caleyo, T. Baudin, J.H. Espina-Hernández, and J.M. Hallen: Corros. Sci., 2011, vol. 53, no. 12, pp. 3873–4326.10.1016/j.corsci.2011.08.031 ↗
26. V. Venegas, F. Caleyo, J.M. Hallen, T. Baudin, and R. Penelle: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1022–31.10.1007/s11661-007-9130-9 ↗
27. B. Hutchinson, N. Hansen, P.V. Houtte, and D.J. Jensen: Philos. Transact. A Math. Phys. Eng. Sci., 1999, vol. 357, no. 1756, pp. 1471–85.10.1098/rsta.1999.0385 ↗
28. I.M. Richardson, N.J. Woodward, and J. Billingham: The Twelfth Int. Offshore and Polar Engineering Conf., Kitakyushu, Japan, 2002.
29. G.R. Jones: High Pressure Arcs in Industrial Devices, Cambridge University Press, New York, NY, 1988.
30. A.S. Azar, N. Woodward, H. Fostervoll, and O.M. Akselsen: J. Mater. Process Tech., 2012, vol. 1, pp. 211–19.10.1016/j.jmatprotec.2011.09.006 ↗
31. Ø. Grong: Metallurgical Modelling of Welding, 2nd ed., Maney Publishing, Cambridge, MA, 1997.
32. M. Suban and J. Tušek: J. Mater. Process. Techn., 2001, vol. 119, nos. 1–3, pp. 185–92.10.1016/S0924-0136(01)00940-2 ↗
33. Y. Wang and H. Tsai: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 501–15.10.1007/s11663-001-0035-5 ↗
34. M. Ferrante and R.A. Farrar: J. Mater. Sci., 1982, vol. 17, no. 11, pp. 3293–98.10.1007/BF01203498 ↗
35. A. Kumar and T. DebRoy: 7 th Int. Conf. on Trends in Welding Research, S.A. Davis, T. DebRoy, J.C. Lippold, H.B. Smartt, and J.M. Vitek, eds., Pine Mountain, GA, 2005.
36. W. Zhang, C.-H. Kim, and T. DebRoy: J. Appl. Phys. 2004, vol. 95, p. 5210.10.1063/1.1699485 ↗
37. K. Davut and S. Zaefferer: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2187–96.10.1007/s11661-010-0315-2 ↗
38. S. Biggin and D.J. Dingley: J. Appl. Crystall., 1977, vol. 10, no. 5, pp. 376–85.10.1107/S0021889877013806 ↗
39. O. Engler and V. Randle: Introduction to Texture Analysis, 2nd ed., CRC Press, Boca Raton, FL, 2000.
40. D.G. Brandon: Acta Metall., 1966, vol. 14, no. 11, pp. 1479.10.1016/0001-6160(66)90168-4 ↗
41. D. Wolf and S. Yip: Materials Interfaces: Atomic-Level Structure and Properties, Chapman & Hall, London, U.K., 1992.
42. Y.L. He, S. Godet, J. Jacques, and J.J. Jones: Mater. Sci. Forum, 2005, vols. 495–497, pp. 1201–06.10.4028/www.scientific.net/MSF.495-497.1201 ↗
43. J. Wheeler, D.J. Prior, Z. Jiang, R. Spiess, and P.W. Trimby: Contrib. Mineral. Petrol., 2001, vol. 141, no. 1, pp. 109–24.10.1007/s004100000225 ↗
44. E. Keehan, L. Karlsson, H.K.D.H. Bhadeshia, and M. Thuvander: Mater. Sci. Technol., 2008, vol. 24, no. 10, pp. 1183–88.10.1179/174328407X226572 ↗
45. P.W. Bridgman: Studies in Large Plastic Flow and Fracture: with Special Emphasis on the Effects of Hydrostatic Pressure, Harvard University Press, Cambridge, MA, 1964.10.4159/harvard.9780674731349 ↗
46. W.D. Callister and D.G. Rethwisch: Fundamentals of Materials Science and Engineering: An Integrated Approach, Wiley, Hoboken, NJ, 2011.
47. W.B. Hutchinson: Acta Metall., 1989, vol. 37, no. 4, pp. 1047–56.10.1016/0001-6160(89)90101-6 ↗