journal article·2012-11

Refinement of Ferrite Grain Size near the Ultrafine Range by Multipass, Thermomechanical Compression

S. Patra, S. Neogy, Vinod Kumar, D. Chakrabarti, A. Haldar

Publisher page

Abstract

Plane-strain compression testing was carried out on a Nb-Ti-V microalloyed steel, in a GLEEBLE3500 simulator using a different amount of roughing, intermediate, and finishing deformation over the temperature range of 1373 K to 1073 K (1100 °C to 800 °C). A decrease in soaking temperature from 1473 K to 1273 K (1200 °C to 1000 °C) offered marginal refinement in the ferrite (α) grain size from 7.8 to 6.6 μm. Heavy deformation using multiple passes between A e3 and A r3 with true strain of 0.8 to 1.2 effectively refined the α grain size (4.1 to 3.2 μm) close to the ultrafine size by dynamic-strain-induced austenite (γ) → ferrite (α) transformation (DSIT). The intensities of microstructural banding, pearlite fraction in the microstructure (13 pct), and fraction of the harmful “cube” texture component (5 pct) were reduced with the increase in finishing deformation. Simultaneously, the fractions of high-angle (>15 deg misorientation) boundaries (75 to 80 pct), beneficial gamma-fiber (ND//〈111〉) texture components, along with {332}〈133〉 and {554}〈225〉 components were increased. Grain refinement and the formation of small Fe3C particles (50- to 600-nm size) increased the hardness of the deformed samples (184 to 192 HV). For the same deformation temperature [1103 K (830 °C)], the difference in α-grain sizes obtained after single-pass (2.7 μm) and multipass compression (3.2 μm) can be explained in view of the static- and dynamic-strain-induced γ → α transformation, strain partitioning between γ and α, dynamic recovery and dynamic recrystallization of the deformed α, and α-grain growth during interpass intervals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, Book 615, pp. 80–15.
2. F. Siciliano and J.J. Jonas: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 511–30.10.1007/s11661-000-0287-8 ↗
3. H. Beladi, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 450–63.10.1007/s11661-006-9080-7 ↗
4. R. Song, D. Ponge, D. Raabe, J.G. Speer, and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
5. R. Priestner and A.K. Ibraheem: Mater. Sci. Technol., 2000, vol. 16, pp. 1267–72.10.1179/026708300101507497 ↗
6. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179–84.10.1016/S1359-6462(98)00411-4 ↗
7. T. Morimoto, I. Chikushi, R. Kurahashi, and J. Yanagimoto: Proc. Int. Conf. on Thermomechanical Processing of Steels, Stahleisen Verlag GmbH, Dusseldorf, Germany, 2004, pp. 415–22.
8. M. Miyata, W. Wakita, F. Fukushima, M. Eto, T. Sasaki, and T. Tomida: Mater. Sci. Forum, 2007, vols. 539–543, pp. 4698–03.10.4028/www.scientific.net/MSF.539-543.4698 ↗
9. R. Barbosa, D.B. Santos, and R.E. Lino: Mater. Sci. Forum, 2007, vols. 558–559, pp. 471–75.10.4028/www.scientific.net/MSF.558-559.471 ↗
10. H. Dong and X. Sun: Curr. Opin. Solid State Mater. Sci., 2005, vol. 9, pp. 269–76.10.1016/j.cossms.2006.02.014 ↗
11. B. Dutta and C.M. Sellars: Mater. Sci. Technol., 1987, vol. 3, p. 197–206.10.1179/026708387790122846 ↗
12. D. Chakrabarti, M. Strangwood, and C.L. Davis: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 780–95.10.1007/s11661-009-9794-4 ↗
13. S.J. Wu and C.L. Davis: J. Microsc., 2004, vol. 213, pp. 262–72.10.1111/j.0022-2720.2004.01311.x ↗
14. S. Patra, S. Roy, Vinod Kumar, A. Haldar, and D. Chakrabarti: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2575–90.10.1007/s11661-011-0668-1 ↗
15. R.K. Ray, J.J. Jonas, M.P. Butron-Guillen, and J. Savoie: ISIJ Int., 1994, vol. 34, pp. 927–42.10.2355/isijinternational.34.927 ↗
16. R.K. Ray, M.P. Butron-Guillen, J.J. Jonas, and G.E. Ruddle: ISIJ Int., 1992, vol. 32, pp. 203–12.10.2355/isijinternational.32.203 ↗
17. V. Randle: Text. Microstr., 1993, vol. 20, pp. 231–42.10.1155/TSM.20.231 ↗
18. S.C. Hong and K.S. Lee: Mater. Sci. Eng., 2002, vol. A323, pp. 148–59.10.1016/S0921-5093(01)01359-4 ↗
19. D.Q. Bai, S. Yue, W.P. Sun, and J.J. Jonas: Metall. Mater. Trans. A, 1993, vol. 24A, pp. 2151–59.10.1007/BF02648589 ↗
20. S. Lee, D. Kwon, Y.K. Lee, and O. Kwon: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1093–1100.10.1007/BF02670605 ↗
21. B. Eghbali: Mater. Charact., 2008, vol. 59, pp. 473–78.10.1016/j.matchar.2007.07.012 ↗
22. Z.Q. Sun, W.Y. Yang, J.J. Qi, and A.M. Hu: Mater. Sci. Eng. A, 2002, vol. 334, pp. 201–06.10.1016/S0921-5093(01)01806-8 ↗
23. B. Eghbali and M. Shaban: J. Iron Steel Res. Int., 2011, vol. 18, pp. 41–46.10.1016/S1006-706X(11)60088-5 ↗
24. J.L. Ferrieira, T.M.F. de Melo, I. de S. Bott, D.B. Santos, and P.R. Rios: ISIJ Int., 2007, vol. 47, pp. 1638–46.10.2355/isijinternational.47.1638 ↗
25. G.L. Kelly, H. Beladi, and P.D. Hodgson: ISIJ Int., 2003, vol. 12, pp. 1585–90.
26. A. Shokouhi and P.D. Hodgson: Mater. Sci. Technol., 2007, vol. 23, pp. 1233–42.10.1179/174328407X226617 ↗
27. T. Tomida, N. Imai, K. Miyata, S. Fukushima, M. Yoshida, M. Wakita, M. Etou, T. Sasaki, Y. Haraguchi, and Y. Okada: ISIJ Int., 2008, vol. 48, pp. 1148–57.10.2355/isijinternational.48.1148 ↗
28. W.R. Calado and R.A.N.M. Barbosa: ISIJ Int., 2010, vol. 50, pp. 1471–75.10.2355/isijinternational.50.1471 ↗
29. S.V.S. Narayana Murty, S. Torizuka, K. Nagai, T. Kitai, and Y. Kogo: Scripta Mater., 2005, vol. 53, pp. 763–68.10.1016/j.scriptamat.2005.05.027 ↗
30. D. Chakrabarti, C.L. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
31. D. Chakrabarti, C.L. Davis, and M. Strangwood: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1963–77.10.1007/s11661-008-9535-0 ↗
32. E.J. Palmiere, C.I. Garcia, and A.J. DeArdo: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 277–86.10.1007/BF02647973 ↗
33. L.J. Cuddy and J.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989–95.10.1007/BF02662366 ↗
34. F. Boratto, R. Barbosa, S. Yue, and J.J. Jonas: Proc. Iron and Steel Institute of Japan, Tokyo, Thermec 88, 1988, pp. 383–90.
35. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
36. T. Sakai, M. Ohashi, K. Chiba, and J.J. Jonas: Acta Metall., 1988, vol. 36, pp. 1781–90.10.1016/0001-6160(88)90246-5 ↗
37. A.I. Fernandez, P. Uranga, B. Lopez, and J.M. Rodriguez Ibabe: Mater. Sci. Eng. A, 2003, vol. 361A, pp. 367–76.
38. H. Beladi, G.L. Kelly, A. Shokouhi, and P.D. Hodgson: Mater. Sci. Eng. A, 2004, vol. 367, pp. 152–61.10.1016/j.msea.2003.09.095 ↗
39. J.K. Choi, D.H. Seo, J.S. Lee, K.K. Um, and W.Y. Choo: ISIJ Int., 2003, vol. 43, pp. 746–54.10.2355/isijinternational.43.746 ↗
40. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
41. S.C. Hong, S.H. Lim, H.S. Hong, K.J. Lee, D.H. Shin, and K.S. Lee: Mater. Sci. Eng. A, 2003, vol. 355, pp. 241–48.10.1016/S0921-5093(03)00071-6 ↗
42. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9, pp. 286–96.10.1361/105994900770345935 ↗
43. G. Krauss: Metall. Mater. Trans. B, 2002, vol. 34B, pp. 781–92.
44. Eric A. Jägle: Master’s Thesis, The University of Cambridge, Cambridge, United Kingdom, 2007, pp. 13–23.
45. M. Militzer and Y. Brechet: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2273–82.10.1007/s11661-009-9926-x ↗
46. C.M. Sellars and J.H. Beynon: Proc. Conf. on HSLA Steels, D.P. Dunne and T. Chandra, eds., South Coast Printers, Port Kembla, Australia, 1985, pp. 142–50.
47. T. Furuhara, K. Kikumoto, H. Saito, T. Sekina, T. Ogawa, S. Morito, and T. Maki: ISIJ Int., 2008, vol. 48, pp. 1038–45.10.2355/isijinternational.48.1038 ↗
48. J. Majta, A.K. Zurek, M. Cola, P. Hochanadel, and M. Pietrzyk: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1509–20.10.1007/s11661-002-0073-x ↗
49. P.D. Hodgson, A. Shokouhi, and H. Beladi: ISIJ Int., 2008, vol. 48, pp. 1046–49.10.2355/isijinternational.48.1046 ↗
50. A. Najafi-Zadeh, J.J. Jonas, and S. Yue: Metall. Trans. A, 1992, vol. 23A, pp. 2607–18.10.1007/BF02658064 ↗
51. M.R. Barnett, G.L. Kelly, and P.D. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1893–1900.10.1007/s11661-002-0022-8 ↗
52. H. Mabuchi, T. Hasagawa, and T. Ishikawa: ISIJ Int., 1999, vol. 39, pp. 477–85.10.2355/isijinternational.39.477 ↗
53. G. Glover and C.M. Sellars: Metall. Trans., 1973, vol. 4, pp. 765–75.10.1007/BF02643086 ↗
54. B. Mintz, J. Lewis, and J.J. Jonas: Mater. Sci. Technol., 1997, vol. 13, pp. 379–88.10.1179/026708397790302179 ↗
55. K. Mukherjee, S.S. Hazra, and M. Militzer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2145–59.10.1007/s11661-009-9899-9 ↗
56. R. Song, D. Ponge, D. Raabe, and R. Kaspar: Acta Mater., 2005, vol. 53, pp. 845–58.10.1016/j.actamat.2004.10.051 ↗