journal article·2013-11

Characterization of Creep-Damaged Grain Boundaries of Alloy 617

Fan Zhang, David P. Field

Publisher page

Abstract

Intergranular cracking and void nucleation occur over extended periods of time in alloy 617 when subjected to stress at high temperatures. Damage occurs inhomogeneously with some boundaries suffering failure, while others are seemingly immune to creep. Crack propagation associated with grain size, and grain boundary character was investigated to determine which types of grain boundaries are susceptible to damage and which are more resistant. Electron backscatter diffraction and a stereological approach to obtain the five-parameter grain boundary distribution were used to measure the proportions of each type of boundary in the initial and damaged structures. The samples were crept at 1273.15 K (1000 °C) at 25 MPa until fracture. It was found that in addition to low-angle and coherent twin boundaries, other low index boundary plane grain boundaries with twist character are relatively resistant to creep.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A.R. Ibañez, A. Saxena, and J. Kang: Strength Fract. Complex, 2006, vol. 4, pp. 75–81.
2. S. A. Sajjadi and S. Nategh: Mater. Sci. Eng. A, 2001, vol. 307, pp. 158–64.10.1016/S0921-5093(00)01822-0 ↗
3. R. Monzen, R. Monzen, H. Shigehara, and K. Kita: Mater. Sci., 2000, vol. 35, pp. 5839–43.10.1023/A:1026700222794 ↗
4. S. Kihara, A. Ohtomo, and Y. Saiga: Metall. Trans. A, 1980, vol. 11A, pp. 1019–1031.10.1007/BF02654716 ↗
5. Q. Wu, H. Song, R.W. Swindeman, J.P. Shingledecker, and V.K. Vasudevan: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2569–85.10.1007/s11661-008-9618-y ↗
6. T. Lillo, J. Cole, M. Frary, and S. Schlegel: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2803–811.10.1007/s11661-009-0051-7 ↗
7. S.K. Sharma, J.W. Choi, and K.J. Kang: Adv. Mater. Res., 2007, vol. 26, p. 233.10.4028/www.scientific.net/AMR.26-28.233 ↗
8. S. Yang, U. Krupp, H. Christ, and V. B. Trindade: Adv. Eng. Mater., 2005, vol. 7, pp. 723–26.10.1002/adem.200500036 ↗
9. S. Schlegel, S. Hopkins, E. Young, J. Cole, T. Lillo, and M. Frary: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2812–23.10.1007/s11661-009-0027-7 ↗
10. W.G. Kim, S.N. Yin, Y.W. Kim, and J.H. Chang: Proceedings of ASME, 2008, 61356.
11. T. Skidmore, R.G. Buchheit, and M.C. Juhas: Acta Mater., 2004, vol. 50, no. 6, pp. 873–77.
12. A. Thomas, M.E. Wahabi, J.M. Cabrera, and J.M. Prado: J. Mater. Process. Technol., 2006, vol. 177, pp. 469–72.10.1016/j.jmatprotec.2006.04.072 ↗
13. L.P. Evers, W.A.M. Brekelmansb, and M.G.D. Geers: Int. J. Solids Struct., 2004, vol. 41, pp. 5209–30.10.1016/j.ijsolstr.2004.04.021 ↗
14. V.Y. Gertsman and S.M. Bruemmer: Acta Mater., 2001, vol. 49, pp. 1589–98.10.1016/S1359-6454(01)00064-7 ↗
15. M. Kumar, W.E. King, and A.J. Schwartz: Acta Mater., 2000, vol. 48, pp. 2081–91.10.1016/S1359-6454(00)00045-8 ↗
16. B.W. Reed, M. Kumar, R.W. Minich, and R.E. Rudd: Acta Mater., 2008, vol. 56, no. 13, pp. 3278–89.10.1016/j.actamat.2008.03.019 ↗
17. A.P. Sutton and R.W. Balluffi: Acta Metall., 1987, vol. 35, pp. 2177–2201.10.1016/0001-6160(87)90067-8 ↗
18. D. P. Field and B. L. Adams: Metall. Trans., 1992, vol. 23A, pp. 2515–26.10.1007/BF02658055 ↗
19. B.L. Adams and D.P. Field: Metall. Trans. A, 1992, vol. 23, pp. 2501–13.10.1007/BF02658054 ↗
20. A. Morawiec: Orientations and Rotations. Computations in Crystallographic Textures, Springer, Berlin, 2004.10.1007/978-3-662-09156-2 ↗
21. D. Wolf: Atomic-level Structure and Properties 1922, D. Wolf and S. Yip, eds., Chapman & Hall, London, 1922, p. 1.
22. D.M. Saylor, B.S. El-Dasher, B.L. Adams, and G.S. Rohrer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1981–89.10.1007/s11661-004-0147-z ↗
23. M.A. Fortes: Acta Crystallogr. A, 1972, vol. 28, p. 100.10.1107/S0567739472000257 ↗
24. D.P. Field: Ultramicroscopy, 1997, vol. 67, pp. 1–9.10.1016/S0304-3991(96)00104-0 ↗
25. D.J. Dingley, D.P. Field: Mater. Sci. Technol., 1997, vol. 13, pp. 69–78.10.1179/026708397790242897 ↗
26. D.G. Brandon: Acta Metall., 1966, vol. 12, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
27. H.J. Breuer and H. Breitling: W. Dietz, 8th Meeting on Long Term Behavior of Creep Resistant Steels and High Temperature Materials, Association for Creep-Resistant Steels and Association for High-Temperature Materials, Düsseldorf, 1985.
28. G. Palumbo, P. J. King, P. C. Lichtenberger, K. T. Aust, and U. Erb: Mater. Res. Soc. Symp. Proc., 1991, vol. 238, pp. 311–16.10.1557/PROC-238-311 ↗
29. K.T. Aust: Can. Inst. Min. Metall., 1994, vol. 33, pp. 265–74.10.1179/000844394795538993 ↗
30. N.E. Dowling: Mechanical Behavior of Materials, 3rd edn, Prentice Hall, Upper Saddle River, 2006.
31. A. Morawiec: J. Appl. Crystallogr., 2011, vol. 44, pp. 1152–1156.10.1107/S002188981104310X ↗
32. T. Watanabe: Mater. Sci. Eng. A, 1993, vol. 166, pp. 11–28.10.1016/0921-5093(93)90306-Y ↗
33. H.C. Chang and N.G. Grant: Trans. Am. Inst. Min. Metall. Eng., 1956, vol. 206, pp. 544–51.
34. F. Zhang and D.P. Field: Mater. Res. Soc. Symp. Proc., 2012, 1383.10.1557/opl.2012.243 ↗