journal article·2022-06

Experimental Determination of the Length-Scale Parameter for the Phase-Field Modeling of Macroscale Fracture in Cr–Al2O3 Composites Fabricated by Powder Metallurgy

Hossein Darban, Kamil Bochenek, Witold Węglewski, Michał Basista

Publisher page

Abstract

A novel approach is proposed to determine a physically meaningful length-scale parameter for the phase-field modeling of macroscale fracture in metal–ceramic composites on an example of chromium–alumina composite fabricated by powder metallurgy. The approach is based on the fractography analysis by the scanning electron microscopy (SEM) with the aim to measure the process zone size and use that value as the length-scale parameter in the phase-field modeling. Mode I and mixed-mode I/II fracture tests are conducted on Cr–Al2O3 composites at different reinforcement volume fractions and particle sizes using single-edge notched beams under four-point bending. The fracture surfaces are analyzed in detail by SEM to determine the size of the process zone where the microscale nonlinear fracture events occur. The model adequately approximates the experimentally measured fracture toughness and the fracture loads. It is shown that the model prediction of the crack initiation direction under the mixed-mode loading is in agreement with the experiments and the generalized maximum tangential stress criterion. These outcomes justify using the process zone size as the scale parameter in the phase-field modeling of macroscale fracture in chromium–alumina and similar metal–ceramic composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Numerical methods in engineering · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. M. Rosso: J. Mater. Process. Technol., 2006, vol. 175, pp. 364–75.10.1016/j.jmatprotec.2005.04.038 ↗
2. M. Finot, Y.L. Shen, A. Needleman, and S. Suresh: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 2403–20.10.1007/BF02648860 ↗
3. Y.L. Shen, A. Needleman, and S. Suresh: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 839–50.10.1007/BF02665460 ↗
4. J. Zygmuntowicz, H. Winkler, M. Wachowski, P. Piotrkiewicz, and W. Kaszuwara: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 3628–46.10.1007/s11661-021-06334-1 ↗
5. J. Maj, W. Węglewski, K. Bochenek, Ł Rogal, S. Woźniacka, and M. Basista: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4727–36.10.1007/s11661-021-06401-7 ↗
6. A.B. Pandey, B.S. Majumdar, and D.B. Miracle: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 921–36.10.1007/s11661-000-1011-4 ↗
7. S.G. Song, N. Shi, G.T. Gray, and J.A. Roberts: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3739–46.10.1007/BF02595465 ↗
8. P. Agrawal and C.T. Sun: Compos. Sci. Technol., 2004, vol. 64, pp. 1167–78.10.1016/j.compscitech.2003.09.026 ↗
9. X.J. Wang, K. Wu, W.X. Huang, H.F. Zhang, M.Y. Zheng, and D.L. Peng: Compos. Sci. Technol., 2007, vol. 67, pp. 2253–60.10.1016/j.compscitech.2007.01.022 ↗
10. Q. Wu, W. Xu, and L. Zhang: Composites B, 2019, vol. 163, pp. 384–92.10.1016/j.compositesb.2018.12.099 ↗
11. W. Węglewski, P. Pitchai, K. Bochenek, G. Bolzon, R. Konetschnik, B. Sartory, R. Ebner, D. Kiener, and M. Basista: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2377–90.10.1007/s11661-020-05687-3 ↗
12. A. Ayyar and N. Chawla: Compos. Sci. Technol., 2006, vol. 66, pp. 1980–94.10.1016/j.compscitech.2006.01.007 ↗
13. A. Ayyar and N. Chawla: Acta Mater., 2007, vol. 55, pp. 6064–73.10.1016/j.actamat.2007.06.044 ↗
14. M. Li, S. Ghosh, O. Richmond, H. Weiland, and T.N. Rouns: Mater. Sci. Eng. A, 1999, vol. 266, pp. 221–40.10.1016/S0921-5093(98)01133-2 ↗
15. J. Llorca, A. Needleman, and S. Suresh: Acta Metall. Mater., 1991, vol. 39, pp. 2317–35.10.1016/0956-7151(91)90014-R ↗
16. C. Miehe, F. Welschinger, and M. Hofacker: Int. J. Numer. Methods Eng., 2010, vol. 83, pp. 1273–1311.10.1002/nme.2861 ↗
17. C. Miehe, M. Hofacker, and F. Welschinger: Comput. Methods Appl. Mech. Eng., 2010, vol. 199, pp. 2765–78.10.1016/j.cma.2010.04.011 ↗
18. S.N. Hirshikesh, R.K. Annabattula, and E. Martínez-Pañeda: Composites B, 2019, vol. 169, pp. 239–48.10.1016/j.compositesb.2019.04.003 ↗
19. G. Molnár, A. Gravouil, R. Seghir, and J. Réthoré: Comput. Methods Appl. Mech. Eng., 2020, vol. 365, p. 113004.10.1016/j.cma.2020.113004 ↗
20. Y. Feng, Q. Wang, D. Wu, Z. Luo, X. Chen, T. Zhang, and W. Gao: Int. J. Eng. Sci., 2021, vol. 169, p. 103587.10.1016/j.ijengsci.2021.103587 ↗
21. S. Goswami, C. Anitescu, S. Chakraborty, and T. Rabczuk: Theor. Appl. Fract. Mech., 2020, vol. 106, p. 102447.10.1016/j.tafmec.2019.102447 ↗
22. T.-T. Nguyen, J. Yvonnet, D. Waldmann, and Q.-C. He: Eng. Fract. Mech., 2019, vol. 218, p. 106574.10.1016/j.engfracmech.2019.106574 ↗
23. T.T. Nguyen, J. Yvonnet, Q.Z. Zhu, M. Bornert, and C. Chateau: Comput. Methods Appl. Mech. Eng., 2016, vol. 312, pp. 567–95.10.1016/j.cma.2015.10.007 ↗
24. Y. Chen, D. Vasiukov, L. Gélébart, and C.H. Park: Comput. Methods Appl. Mech. Eng., 2019, vol. 349, pp. 167–90.10.1016/j.cma.2019.02.017 ↗
25. S.B. Biner and S.Y. Hu: Acta Mater., 2009, vol. 57, pp. 2088–97.10.1016/j.actamat.2009.01.012 ↗
26. G. Molnár, A. Doitrand, R. Estevez, and A. Gravouil: Theor. Appl. Fract. Mech., 2020, vol. 109, p. 102736.10.1016/j.tafmec.2020.102736 ↗
27. T.T. Nguyen, J. Yvonnet, M. Bornert, C. Chateau, K. Sab, R. Romani, and R. Le Roy: Int. J. Fract., 2016, vol. 197, pp. 213–26.10.1007/s10704-016-0082-1 ↗
28. E. Tanné, T. Li, B. Bourdin, J.J. Marigo, and C. Maurini: J. Mech. Phys. Solids, 2018, vol. 110, pp. 80–99.10.1016/j.jmps.2017.09.006 ↗
29. P.J. Loew, B. Peters, and L.A.A. Beex: J. Mech. Phys. Solids, 2019, vol. 127, pp. 266–94.10.1016/j.jmps.2019.03.022 ↗
30. ISO 23146:2012, Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics)—Test Methods for Fracture Toughness of Monolithic Ceramics—Single-Edge V-Notch Beam (SEVNB) Method.
31. W. Węglewski, M. Krajewski, K. Bochenek, P. Denis, A. Wysmołek, and M. Basista: Mater. Sci. Eng. A, 2019, vol. 762, p. 138111.10.1016/j.msea.2019.138111 ↗
32. W. Węglewski, M. Basista, M. Chmielewski, and K. Pietrzak: Composites B, 2012, vol. 43, pp. 255–64.10.1016/j.compositesb.2011.07.016 ↗
33. A. Rabiei, L. Vendra, and T. Kishi: Composites A, 2008, vol. 39, pp. 294–300.10.1016/j.compositesa.2007.10.018 ↗
34. H. Prielipp, M. Knechtel, N. Claussen, S.K. Streiffer, H. Müllejans, M. Rühle, and J. Rödel: Mater. Sci. Eng. A, 1995, vol. 197, pp. 19–30.10.1016/0921-5093(94)09771-2 ↗
35. J. Ulloa, P. Rodríguez, C. Samaniego, and E. Samaniego: Undergr. Space, 2019, vol. 4, pp. 10–21.10.1016/j.undsp.2018.08.002 ↗
36. C. Kuhn, A. Schlüter, and R. Müller: Comput. Mater. Sci., 2015, vol. 108, pp. 374–84.10.1016/j.commatsci.2015.05.034 ↗
37. J.-Y. Wu: J. Mech. Phys. Solids, 2017, vol. 103, pp. 72–99.10.1016/j.jmps.2017.03.015 ↗
38. P.K. Kristensen and E. Martínez-Pañeda: Theor. Appl. Fract. Mech., 2020, vol. 107, p. 102446.10.1016/j.tafmec.2019.102446 ↗
39. T. Wick: SIAM J. Sci. Comput., 2017, vol. 39, pp. B589–8617.10.1137/16M1063873 ↗
40. T. Gerasimov and L. De Lorenzis: Comput. Methods Appl. Mech. Eng., 2016, vol. 312, pp. 276–303.10.1016/j.cma.2015.12.017 ↗
41. T. Wick: Comput. Methods Appl. Mech. Eng., 2017, vol. 325, pp. 577–611.10.1016/j.cma.2017.07.026 ↗
42. B. Bourdin, G.A. Francfort, and J.J. Marigo: J. Mech. Phys. Solids, 2000, vol. 48, pp. 797–826.10.1016/S0022-5096(99)00028-9 ↗
43. G. Molnár and A. Gravouil: Finite Elem. Anal. Des., 2017, vol. 130, pp. 27–38.10.1016/j.finel.2017.03.002 ↗
44. R. de Borst and C.V. Verhoosel: Comput. Methods Appl. Mech. Eng., 2016, vol. 312, pp. 78–94.10.1016/j.cma.2016.05.015 ↗
45. ISO 14704:2016, Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics)—Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature.
46. S.H. Chen and T.C. Wang: Acta Mech., 2002, vol. 157, pp. 113–27.10.1007/BF01182158 ↗
47. M.G.D. Geers, R. de Borst, W.A.M. Brekelmans, and R.H.J. Peerlings: Int. J. Solids Struct., 1999, vol. 36, pp. 2557–83.10.1016/S0020-7683(98)00123-1 ↗
48. H. Darban, M. Haghpanahi, and A. Assadi: Comput. Mater. Sci., 2011, vol. 50, pp. 1667–74.10.1016/j.commatsci.2010.12.027 ↗
49. D.J. Smith, M.R. Ayatollahi, and M.J. Pavier: Fatigue Fract. Eng. Mater. Struct., 2001, vol. 24, pp. 137–50.10.1046/j.1460-2695.2001.00377.x ↗