Transient Stress Relaxation Test to Identify Material Constants in Dislocation Density Model
Source abstract
Abstract
The constitutive behavior of metallic materials in terms of dislocation kinetics can be successfully described using a dislocation density-based model. Although the kinetics of thermally activated plastic deformation is well described by such models, the number of material constants associated with the model leads to non-unique solution set. In the present work, transient stress relaxation test is used to identify rate-dependent material parameters. The stress relaxation test, when used in conjunction with stress-strain curve can reduce the uncertainty associated with parameter identification. The proposed methodology is demonstrated using aluminum alloys subjected to severe plastic deformation processes such as cryorolling and constrained groove pressing. Kocks-Mecking-Estrin (KME) dislocation density model is implemented as a user subroutine in commercial finite element analysis software. The parameter identification procedure is validated by comparing the experimental results of monotonic tensile and limiting dome height tests. Using dislocation density model, it is shown that unlike the general understanding, the limiting strain is not related to the strain hardening exponent. The limiting strain correlates only with the extent of dynamic recovery, a component of strain hardening. ; 1 ; 1 ; N ; scie ; scopus
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. H.J. Kleemola and M.A. Nieminen: Metall. Trans., 1974, vol. 5, pp. 1863–66.10.1007/BF02644152 ↗
2. S. Sudhy, K. Panicker, S. Prasad, S. Basak, and S.K. Panda: J. Mater. Eng. Perform., 2017, vol. 26, pp. 3954–69.10.1007/s11665-017-2837-x ↗
3. E.I. Poliak and J.J. Jonas: Acta Mater., 1996, vol. 44, pp. 127–36.10.1016/1359-6454(95)00146-7 ↗
4. E.W. Hart: J. Eng. Mater. Technol., 1976, vol. 98, pp. 193–202.10.1115/1.3443368 ↗
5. J.C. Swearengen and R.W. Rhode: Metall. Trans. A., 1977, vol. 8, pp. 577–82.10.1007/BF02676978 ↗
6. Y. Bergström, Y. Granbom, and D. Sterkenburg: J. Metall., 2010, vol. 2010, pp. 647198(1–16).10.1155/2010/647198 ↗
7. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
8. U.F. Kocks: J. Eng. Mater. Technol., 1976, vol. 98, pp. 76–85.10.1115/1.3443340 ↗
9. Y. Estrin: J. Mater. Process. Technol., 1998, vol. 80, pp. 33–9.10.1016/S0924-0136(98)00208-8 ↗
10. Y. Estrin: in Unified Constitutive Laws of Plastic Deformation. A.S. Krausz and K. Krausz, eds., Academic Press, New York City, 1996, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
11. A. Vinogradov, E. Agletdinov, I.S. Yasnikov, K. Mathis, and Y. Estrin: Mater. Sci. Eng. A, 2020, vol. 780, pp. 139194(1–12).10.1016/j.msea.2020.139194 ↗
12. G.-H. Zhao, X. Xu, D. Dye, and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2020, vol. 183, pp. 155–64.10.1016/j.actamat.2019.11.009 ↗
13. N. Ueshima, K. Kubota, and K. Oikawa: Materialia, 2019, vol. 8, pp. 100464(1–9).10.1016/j.mtla.2019.100464 ↗
14. C. Fressengeas, A.J. Beaudoin, M. Lebyodkin, L.P. Kubin, and Y. Estrin: Mater. Sci. Eng. A., 2005, vol. 400–401, pp. 226–30.10.1016/j.msea.2005.02.073 ↗
15. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
16. Y. Estrin, L.S. Tóth, A. Molinari, and Y. Bréchet: Acta Mater., 1998, vol. 46, pp. 5509–22.10.1016/S1359-6454(98)00196-7 ↗
17. E.F. Rauch, J.J. Gracio, and F. Barlat: Acta Mater., 2007, vol. 55, pp. 2939–48.10.1016/j.actamat.2007.01.003 ↗
18. Y. Estrin, H. Braasch, and Y. Brechet: J. Eng. Mater. Technol., 1996, vol. 118, pp. 441–47.10.1115/1.2805940 ↗
19. A. Prabhakar, G.C. Verma, H. Krishnasamy, P.M. Pandey, M.G. Lee, and S. Suwas: Mech. Res. Commun., 2017, vol. 85, pp. 76–80.10.1016/j.mechrescom.2017.08.003 ↗
20. B. Meng, B.N. Cao, M. Wan, C.J. Wang, and D.B. Shan: Int. J. Mech. Sci., 2019, vol. 157–158, pp. 609–18.10.1016/j.ijmecsci.2019.05.009 ↗
21. Z. Yao, G.-Y. Kim, Z. Wang, L.A. Faidley, Q. Zou, D. Mei, and Z. Chen: Int. J. Plast., 2012, vol. 39, pp. 75–87.10.1016/j.ijplas.2012.06.003 ↗
22. H. Krishnaswamy, M.J. Kim, S.-T. Hong, D. Kim, J.-H. Song, M.-G. Lee, and H.N. Han: Mater. Des., 2017, vol. 124, pp. 131–42.10.1016/j.matdes.2017.03.072 ↗
23. M.N. Shetty: Dislocations and Mechanical Behaviour of Materials, PHI Learning Pvt. Ltd., Delhi, 2013, pp. 326–495.
24. J. Schlipf: Mater. Sci. Eng., 1986, vol. 77, pp. 19–26.10.1016/0025-5416(86)90350-2 ↗
25. Y. Estrin and L.P. Kubin: Acta Metall., 1986, vol. 34, pp. 2455–64.10.1016/0001-6160(86)90148-3 ↗
26. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697–708.10.1016/0956-7151(90)90021-8 ↗
27. Y. Bergström: Mater. Sci. Eng., 1970, vol. 5, pp. 193–200.10.1016/0025-5416(70)90081-9 ↗
28. B. Babu and L.-E. Lindgren: Int. J. Plast., 2013, vol. 50, pp. 94–108.10.1016/j.ijplas.2013.04.003 ↗
29. A. Molinari and G. Ravichandran: Mech. Mater., 2005, vol. 37, pp. 737–52.10.1016/j.mechmat.2004.07.005 ↗
30. K. Changela, H. Krishnaswamy, and R.K. Digavalli: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 648–66.10.1007/s11661-019-05532-2 ↗
31. R. Valiev: Nat. Mater., 2004, vol. 3, pp. 511–16.10.1038/nmat1180 ↗
32. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
33. A. Vinogradov, S. Yasuoka, and S. Hashimoto: Mater. Sci. Forum., 2008, vol. 584–586, pp. 797–802.10.4028/www.scientific.net/MSF.584-586.797 ↗
34. K. Changela, H. Krishnaswamy, and R.K. Digavalli: Mater. Sci. Eng. A., 2019, vol. 760, pp. 7–18.10.1016/j.msea.2019.05.088 ↗
35. S. Kumar, H. Krishnaswamy, R.K. Digavalli, and S.K. Paul: J. Manuf. Process., 2019, vol. 38, pp. 49–62.10.1016/j.jmapro.2018.12.013 ↗
36. D. Torre, E.V. Pereloma, and C.H.J. Davies: Scripta Mater., 2004, vol. 51, pp. 367–71.10.1016/j.scriptamat.2004.05.021 ↗
37. F. Diologent, R. Goodall, and A. Mortensen: Acta Mater., 2011, vol. 59, pp. 6869–79.10.1016/j.actamat.2011.07.021 ↗
38. S. Lee, S.-J. Lee, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 7546–53.10.1016/j.actamat.2011.08.030 ↗
39. M.S. Mohebbi, A. Akbarzadeh, Y.-O. Yoon, and S.-K. Kim: Mech. Mater., 2015, vol. 89, pp. 23–34.10.1016/j.mechmat.2015.06.001 ↗
40. F.H. Dalla Torre, E.V. Pereloma, and C.H.J. Davies: Acta Mater., 2006, vol. 54, pp. 1135–46.10.1016/j.actamat.2005.10.041 ↗
41. Q. Wei, S. Cheng, K.T. Ramesh, and E. Ma: Mater. Sci. Eng. A., 2004, vol. 381, pp. 71–9.10.1016/j.msea.2004.03.064 ↗
42. M. Moradpour, F. Khodabakhshi, and H. Eskandari: Mater. Sci. Technol., 2004, vol. 34, pp. 1003–17.10.1080/02670836.2017.1416906 ↗
43. C. Chinthanai Selvan, C. Sathiya Narayanan, B. Ravisankar, R. Narayanasamy, and C. Thillaiyadi Valliammai: Mater. Res. Express, 2020, vol. 7, pp. 036525(1–11).10.1088/2053-1591/ab7f9a ↗
44. P. Wang, T. Yin, and Qu. Shaoxing: Scripta Mater., 2020, vol. 178, pp. 171–75.10.1016/j.scriptamat.2019.11.028 ↗
45. C. Zheng and L. Li: Mater. Sci. Eng. A., 2018, vol. 713, pp. 35–42.10.1016/j.msea.2017.12.051 ↗
46. M. Montazeri-Pour and M.H. Parsa: Mech. Mater., 2016, vol. 94, pp. 117–31.10.1016/j.mechmat.2015.11.016 ↗
47. H. Conrad: Mater. Sci. Eng., 1970, vol. 6, pp. 265–73.10.1016/0025-5416(70)90054-6 ↗
48. H. Conrad: Prog. Mater. Sci., 1981, vol. 26, pp. 123–403.10.1016/0079-6425(81)90001-3 ↗
49. F. Barlat, M.V. Glazov, J.C. Brem, and D.J. Lege: Int. J. Plast., 2002, vol. 18, pp. 919–39.10.1016/S0749-6419(01)00015-8 ↗
50. U.F. Kocks, A.S. Argon, and M.F. Ashby: Prog. Mater. Sci., 1975, vol. 19, pp. 68–109.10.1016/0079-6425(75)90007-9 ↗
51. D. Caillard and J.L. Martin: Pergamon Mater. Ser., 2003, vol. 8, pp. 57–82.10.1016/S1470-1804(03)80033-0 ↗
52. C.A. Howard and R.J. Stokes: Proc. R. Soc. Lond. A., 1955, vol. 233, pp. 17–34.10.1098/rspa.1955.0243 ↗
53. Z.S. Basinski: Philos. Mag., 1958, vol. 4, pp. 393–432.10.1080/14786435908233412 ↗
54. D.L. Holt: J. Appl. Phys., 1970, vol. 41, pp. 3197–201.10.1063/1.1659399 ↗
55. H. Krishnaswamy and F. Barlat: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 513–17.
56. S.H. He, K.Y. Zhu, and M.X. Huang: Comput. Mater. Sci., 2017, vol. 131, pp. 1–10.10.1016/j.commatsci.2017.01.022 ↗
57. S.K. Panigrahi and R. Jayaganthan: Mater. Sci. Eng. A., 2011, vol. 528, pp. 3147–60.10.1016/j.msea.2011.01.010 ↗
58. R.Z. Valiev, N.A. Enikeev, MYu. Murashkin, V.U. Kazykhanov, and X. Sauvage: Scripta Mater., 2010, vol. 63, pp. 949–52.10.1016/j.scriptamat.2010.07.014 ↗
59. F. Guiu and P.L. Pratt: Phys. Status Solidi B., 1964, vol. 6, pp. 111–20.10.1002/pssb.19640060108 ↗
60. P. Feltham: Philos. Mag., 1961, vol. 6, pp. 847–50.10.1080/14786436108243341 ↗
61. J. Bonneville, P. Spätig, and J.L. Martin: MRS Online Proc. Libr., 1994, vol. 364, pp. 369–74.10.1557/PROC-364-369 ↗
62. A. Varma, H. Krishnaswamy, J. Jain, M.-G. Lee, and F. Barlat: Mech. Mater., 2019, vol. 133, pp. 138–53.10.1016/j.mechmat.2019.03.009 ↗
63. P.M. Anderson, J.P. Hirth, and J. Lothe: Theory of Dislocations, 3rd ed. Cambridge University Press, New York, 2017, pp. 413–54.
64. X.-S. Yang, Y.-J. Wang, G.-Y. Wang, H.-R. Zhai, L.H. Dai, and T.-Y. Zhang: Acta Mater., 2016, vol. 108, pp. 252–63.10.1016/j.actamat.2016.02.021 ↗
65. I.-C. Choi, Y.-J. Kim, B. Ahn, M. Kawasaki, T.G. Langdon, and J.-i Jang: Scripta Mater., 2014, vol. 75, pp. 102–05.10.1016/j.scriptamat.2013.12.003 ↗
66. Y. Xiao, B. Gan, A. S. Sologubenko, R. Spolenak, and J.M. Wheeler: Mater. Sci. Eng. A, 2021, vol. 800, pp. 140266(1–8).10.1016/j.msea.2020.140266 ↗
67. Y.M. Wang, A.V. Hamza, and E. Ma: Appl. Phys. Lett., 2005, vol. 86, pp. 241917(1–3).10.1063/1.1946899 ↗
68. R.W. Hayes, D. Witkin, F. Zhou, and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259–71.10.1016/j.actamat.2004.05.042 ↗
69. H. Krishnaswamy and J. Jain: Manuf. Lett., 2020, vol. 26, pp. 64–68.10.1016/j.mfglet.2020.10.003 ↗
70. T. Kruml, O. Coddet, and J.L. Martin: Acta Mater., 2008, vol. 56, pp. 333–40.10.1016/j.actamat.2007.09.027 ↗
71. K. Sunil Kumar, H. Krishnaswamy, and R.K. Digavalli: Mater. Manuf. Processes., 2020, vol. 35, pp. 687–99.10.1080/10426914.2020.1729986 ↗
72. S. Kumar, S. Venkatachalam, H. Krishnaswamy, R.K. Digavalli, and H.S.N. Murthy: J. Eng. Mater. Technol., 2019, vol. 141, pp. 041007(1–10).10.1115/1.4043492 ↗
73. K. Hashiguchi: Elastoplasticity Theory, 2nd ed. Springer, Berlin Heidelberg, 2014, pp. 379–420.10.1007/978-3-642-35849-4_16 ↗
74. D.R. Satish, F. Feyissa, and D.R. Kumar: Mater. Manuf. Processes., 2017, vol. 32, pp. 1345–52.10.1080/10426914.2017.1317352 ↗
75. B. Modi and D.R. Kumar: Int. J. Adv. Manuf. Technol., 2013, vol. 66, pp. 1159–69.10.1007/s00170-012-4397-4 ↗
76. H. Krishnaswamy, P. Dubey, and J. Jain: Mater. Sci. Eng. A., 2016, vol. 673, pp. 250–56.10.1016/j.msea.2016.07.074 ↗
77. L. Yong and Z. Jingchuan: Mech. Mater., 2008, vol. 40, pp. 792–95.10.1016/j.mechmat.2008.04.004 ↗
78. S. Mishra, V.K. Beura, A. Singh, and M. Yadava: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 3472–77.10.1007/s11661-019-05316-8 ↗
79. L. Xiao and J.L. Bai: Mater. Sci. Eng. A., 1998, vol. 244, pp. 250–56.10.1016/S0921-5093(97)00688-6 ↗
80. A. Varma, A. Gokhale, J. Jain, H. Krishnaswamy, P. Cizek, and M. Barnett: Philos. Mag., 2018, vol. 255, pp. 165–81.10.1080/14786435.2017.1398422 ↗
81. K. Prasad, H. Krishnaswamy, and J. Jain: J. Mater. Process. Technol., 2018, vol. 98, pp. 1–7.10.1016/j.jmatprotec.2017.11.053 ↗
82. Y. Wang, Y. Liu, and J.T. Wang: Mater. Sci. Eng. A., 2015, vol. 635, pp. 86–93.10.1016/j.msea.2015.03.054 ↗
83. R.J. Asaro and S. Suresh: Acta Mater., 2005, vol. 635, pp. 3369–82.10.1016/j.actamat.2005.03.047 ↗
84. Y.M. Wang, A.V. Hamza, and E. Ma: Acta Mater., 2006, vol. 54, pp. 2715–26.10.1016/j.actamat.2006.02.013 ↗
85. C.X. Huang, W.P. Hu, and Q.Y. Wang: Mater. Sci. Eng. A., 2014, vol. 611, pp. 274–79.10.1016/j.msea.2014.05.093 ↗
86. Q. Wei: J. Mater. Sci., 2007, vol. 42, pp. 1709–27.10.1007/s10853-006-0700-9 ↗
87. S.S.S. Kumar and T. Raghu: Mater. Des., 2014, vol. 57, pp. 114–20.10.1016/j.matdes.2013.12.053 ↗
88. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
89. A. Dhal, S.K. Panigrahi, and M.S. Shunmugam: J. Alloys Compd., 2017, vol. 726, pp. 1205–19.10.1016/j.jallcom.2017.08.062 ↗
90. I.S. Yasnikov, A. Vinogradov, and Y. Estrin: Scripta Mater., 2014, vol. 76, pp. 37–40.10.1016/j.scriptamat.2013.12.009 ↗
91. S. Kumar, P.P. Date, and K. Narasimhan: J. Mater. Process. Technol., 1994, vol. 45, pp. 583–88.10.1016/0924-0136(94)90402-2 ↗