journal article·2022-02Open access

The Potential of Al2O3–ZrO2-Based Composites, Formed via CSC Method, in Linear Infrastructure Applications Based on Their Mechanical, Thermal and Environmental performance

Justyna Zygmuntowicz, Paulina Piotrkiewicz, Magda Gizowska, Justyna Tomaszewska, Przemysław Suchecki, Marcin Wachowski, Janusz Torzewski, Radosław Żurowski

Abstract

Abstract Ceramic-ceramic composites have been prepared using the centrifugal slip casting method (CSC). The method has so far been mainly utilized in making ceramic-metal composites. Al2O3–ZrO2 composites have been obtained with different shares of ZrO2, i.e., 15, 50 and 75 vol pct, respectively. Prior to sintering the composite samples, the rheological properties of the casting slips were investigated and thermogravimetric tests were performed. Upon sintering, all three series of the ceramic composites showed a density close to 100 pct and no microcracks or delamination. Phase, microstructural and mechanical investigations were carried out to determine what effect the share of ceramics has on the composites produced. An increase in the share of ZrO2 in the Al2O3–ZrO2 composite leads to a reduction in the growth of Al2O3 grains and a decrease in the average hardness. Cross-sectional hardness testing of the composites showed no evident gradient in any of the samples. Life cycle analysis (LCA) results indicate that the further optimization of the composite formation process, including up-scaling, allows to obtain Al2O3–ZrO2-based pipes possessing more favorable environmental characteristics compared with materials conventionally used for linear infrastructure, which is important in light of the global transformation toward sustainable construction and the circular economy. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. M.M. Basha, S.M. Basha, B.K. Singh, N. Mandal, and M.R. Sankar: Mater. Today: Proc., 2020, vol. 26 (2), pp. 534–41. https://doi.org/10.1016/j.matpr.2019.12.134.10.1016/j.matpr.2019.12.134 ↗
2. A. Maji and G. Choubey: Mater. Today: Proc., 2018, vol. 5 (2), pp. 7457–65. https://doi.org/10.1016/j.matpr.2017.11.417.10.1016/j.matpr.2017.11.417 ↗
3. S.R. Banik, I.M. Iqbal, R. Nath, L.J. Bora, B.K. Singh, N. Mandal, and M.R. Sankar: Mater. Today: Proc., 2019, vol. 18 (7), pp. 2632–41. https://doi.org/10.1016/j.matpr.2019.07.123.10.1016/j.matpr.2019.07.123 ↗
4. V. Tebaldo and G. Gautier: Ceram. Int., 2013, vol. 39(2), pp. 2683–93. https://doi.org/10.1016/j.ceramint.2012.09.035.10.1016/j.ceramint.2012.09.035 ↗
5. A. Navarez-Rascon, A. Aguilar-Elguezabal, E. Orrantia and M.H. Bocanegra-Bernal: Int. J. Refract. Hard Met., 2009, vol. 27 (6), pp. 962–70. https://doi.org/10.1016/j.ijrmhm.2009.06.001.10.1016/j.ijrmhm.2009.06.001 ↗
6. J. Zygmuntowicz, J. Szymańska, M. Wachowski, M. Gloc, and W. Kaszuwara: Int. J. Appl. Ceram. Technol., 2020, vol. 17(6), pp. 2580–90. https://doi.org/10.1111/ijac.13594.10.1111/ijac.13594 ↗
7. J. Zygmuntowicz, A. Miazga, K. Konopka, and W. Kaszuwara: Procedia Struct. Integr., 2016, vol. 1, pp. 305–12. https://doi.org/10.1016/j.prostr.2016.02.041.10.1016/j.prostr.2016.02.041 ↗
8. X. Zhao, S. Yan, H. Wang, H. Jiang, and W. Zhang: Ceram. Int., 2019, vol. 45(1), pp. 247–51. https://doi.org/10.1016/j.ceramint.2018.09.159.10.1016/j.ceramint.2018.09.159 ↗
9. A. Ruys: Alumina Ceramics Biomedical and Clinical Applications, Woodhead Publishing, 2019, pp. 1–37. https://doi.org/10.1016/B978-0-08-102442-3.00001-4.10.1016/B978-0-08-102442-3.00001-4 ↗
10. A. Ruys: Alumina Ceramics Biomedical and Clinical Applications, Woodhead Publishing, 2019, pp. 501–08. https://doi.org/10.1016/B978-0-08-102442-3.00016-6.10.1016/B978-0-08-102442-3.00016-6 ↗
11. J.Y. Yang, M. Xu, and L.H. Liu: J. Quant. Spectrosc. Radiat. Transf., 2016, vol. 184, pp. 111–7. https://doi.org/10.1016/j.jqsrt.2016.07.006.10.1016/j.jqsrt.2016.07.006 ↗
12. T. Kondo, H. Muta, K. Kurosaki, F. Kargl, A. Yamaji, M. Furuya, and Y. Ohishi: Heliyon, 2019, vol. 5 (7), e02049. https://doi.org/10.1016/j.heliyon.2019.e02049.10.1016/j.heliyon.2019.e02049 ↗
13. G. Liu, Z. Xie, and Y. Wu: Mater. Des., 2011, vol. 32(6), pp. 3440–7. https://doi.org/10.1016/j.matdes.2011.01.055.10.1016/j.matdes.2011.01.055 ↗
14. M.K.G. Abbas, S. Ramesh, K.Y. Sara Lee, Y.H. Wong, P. Ganesan, S. Ramesh, U. Johnson Alengaram, W.D. Teng, and J. Purbolaksono: Ceram. Int., 2020, vol. 46 (17), 27539–49. https://doi.org/10.1016/j.ceramint.2020.07.246.10.1016/j.ceramint.2020.07.246 ↗
15. L. Gremillard and J. Chevalier: in Encyclopedia of Materials: Technical Ceramics and Glasses vol. 3, Elsevier, Amsterdam, 2021, pp. 493–500. https://doi.org/10.1016/B978-0-12-818542-1.00027-8.10.1016/B978-0-12-818542-1.00027-8 ↗
16. S. Pfeiffer, K. Florio, D. Puccio, M. Grasso, B.M. Colosimo, C.G. Aneziris, K. Wegener, and T. Graule: J. Eur. Ceram. Soc., 2021, vol. 41 (!3), pp. 6087-114. https://doi.org/10.1016/j.jeurceramsoc.2021.05.035.10.1016/j.jeurceramsoc.2021.05.035 ↗
17. X. Zhang, X. Wu, and J. Shi: J. Mater. Res. Technol., 2020, vol. 9(4), pp. 9029–48. https://doi.org/10.1016/j.jmrt.2020.05.131.10.1016/j.jmrt.2020.05.131 ↗
18. P.C. Hidber, T.J. Graule, and L.J. Gauckler: J. Am. Ceram. Soc., 1996, vol. 79(7), pp. 1857–67. https://doi.org/10.1111/j.1151-2916.1996.tb08006.x.10.1111/j.1151-2916.1996.tb08006.x ↗
19. M. Gizowska, K. Konopka, and M. Szafran: Arch. Metall. Mater., 2011, vol. 56(4), pp. 1105–10. https://doi.org/10.2478/v10172-011-0123-8.10.2478/v10172-011-0123-8 ↗
20. J. Zygmuntowicz, J. Tomaszewska, R. Żurowski, M. Wachowski, I. Szachogłuchowicz, P. Piotrkiewicz, W. Kaszuwara, and K. Konopka: Ceram. Int., 2021, vol. 47(13), pp. 18053–64. https://doi.org/10.1016/j.ceramint.2021.03.121.10.1016/j.ceramint.2021.03.121 ↗
21. J. Zygmuntowicz, A. Miazga, K. Konopka, and W. Kaszuwara: Compos Theory Pract., 2017, vol. 17(1), pp. 37–40.
22. K. Niihara, R. Morena, and D.P.H. Hasselman: J. Mater. Sci., 1982, vol. 1, pp. 13–6.
23. G.R. Anstis, P. Chantikul, B.B. Lawn, and D.B. Marshall: J. Am. Ceram. Soc., 1981, vol. 64, pp. 533–8. https://doi.org/10.1111/j.1151-2916.1981.tb10320.x.10.1111/j.1151-2916.1981.tb10320.x ↗
24. T. Wejrzanowski, L. Spychalski, K. Rożniatowski, and K.J. Kurzydłowski: Int. J. Appl. Math. Comput. Sci., 2008, vol. 18, pp. 33–9. https://doi.org/10.2478/v10006-008-0003-1.10.2478/v10006-008-0003-1 ↗
25. J. Michalski, T. Wejrzanowski, R. Pielaszek, K. Konopka, W. Łojkowski, and K.J. Kurzydłowski: Mater. Sci. Poland., 2005, vol. 23, pp. 79–86.
26. ISO 14044:2006 Environmental management—life cycle assessment—requirements and guidelines.
27. PN-EN 15804+A1:2014-04 - Zrównoważoność obiektów budowlanych -- Deklaracje środowiskowe wyrobu -- Podstawowe zasady kategoryzacji wyrobów budowlanych.
28. Wskaźniki emisyjności CO2, SO2, NOx, CO i pyłu całkowitego dla energii elektrycznej. Krajowy Ośrodek Bilansowania i Zarządzania Emisjami (KOBIZE). Grudzień 2020.
29. L.F.G. Setz, L. Koshimizu, S.R.H. de Mello-Castanho, and M.R. Morelli: Mater. Sci. Forum., 2012, vol. 727–728, pp. 646–51.10.4028/www.scientific.net/MSF.727-728.646 ↗
30. C.-J. Tsai, C.-N. Chen, and W.J. Tseng: J. Eur. Ceram. Soc., 2013, vol. 33(15–16), pp. 3177–84. https://doi.org/10.1016/j.jeurceramsoc.2013.06.006.10.1016/j.jeurceramsoc.2013.06.006 ↗
31. J. Zygmuntowicz, R. Żurowski, J. Tomaszewska, M. Wachowski, J. Torzewski, P. Piotrkiewicz, M. Gloc, and K. Konopka: Materials, 2021, vol. 14 (9), pp. 2375. https://doi.org/10.3390/ma14092375.10.3390/ma14092375 ↗
32. H. Xing, B. Zou, X. Liu, X. Wang, Q. Chen, X. Fu, and Y. Li: Powder. Technol., 2020, vol. 359, pp. 314–22. https://doi.org/10.1016/j.powtec.2019.09.066.10.1016/j.powtec.2019.09.066 ↗
33. S.M. Olhero, I. Ganesh, P.M.C. Torres, J. Alves, and J.M.F. Ferreira: J. Am. Ceram. Soc., 2009, vol. 92(1), pp. 9–16. https://doi.org/10.1111/j.1551-2916.2008.02823.x.10.1111/j.1551-2916.2008.02823.x ↗
34. E. Pietrzak, P. Wiecińska, M. Poterała, and M. Szafran: J. Eur. Ceram. Soc., 2019, vol. 39(12), pp. 3421–32. https://doi.org/10.1016/j.jeurceramsoc.2019.01.048.10.1016/j.jeurceramsoc.2019.01.048 ↗
35. P. Wiecińska, A. Żurawska, P. Falkowski, D.-Y. Jeong, and M. Szafran: J. Korean Ceram. Soc., 2020, vol. 57, pp. 231–45. https://doi.org/10.1007/s43207-020-00036-x.10.1007/s43207-020-00036-x ↗
36. M.M. Gomaa, C. Hugenschmidt, M. Dickmann, E.E. Abdel-Hady, H.F.M. Mohamed, and M.O. Abdel-Hamed: Phys. Chem. Chem. Phys., 2018, vol. 20, pp. 28287–99. https://doi.org/10.1039/c8cp05301d.10.1039/c8cp05301d ↗
37. P. Wiecińska: J. Therm. Anal. Calorim., 2016, vol. 123, pp. 1419–30. https://doi.org/10.1007/s10973-015-5075-1.10.1007/s10973-015-5075-1 ↗
38. M.R. Alvarez, A.R. Landa, L.C. Otero-Diaz, and M.J. Torralvo: J. Eur. Ceram. Soc., 1998, vol. 18(9), pp. 1201–10. https://doi.org/10.1016/S0955-2219(98)00043-0.10.1016/S0955-2219(98)00043-0 ↗
39. W.Z. Zhu: Ceram. Int., 1998, vol. 24(1), pp. 35–43. https://doi.org/10.1016/S0272-8842(96)00074-0.10.1016/S0272-8842(96)00074-0 ↗
40. R.Q. Ye, J.H. Zhao, Z. Zhang, and L.F. Li: Mater. Lett., 1998, vol. 36(1–4), pp. 29–32. https://doi.org/10.1016/S0167-577X(98)00002-0.10.1016/S0167-577X(98)00002-0 ↗
41. S.K. Wang, J.Y. Yu, Q. Li, and E.Y. Zheng: Adv. Mater. Res., 2012, vol. 569, pp. 324–7.10.4028/www.scientific.net/AMR.569.324 ↗
42. S. Martorana, A. Fedele, M. Mazzocchi, and A. Bellosi: Appl. Surf. Sci., 2009, vol. 255(13–14), pp. 6679–85. https://doi.org/10.1016/j.apsusc.2009.02.069.10.1016/j.apsusc.2009.02.069 ↗
43. N.A. Rejab, A.Z.A. Azhar, M.M. Ratnam, and Z.A. Ahmad: Int. J. Refract. Metals Hard Mater., 2013, vol. 41, pp. 522–30. https://doi.org/10.1016/j.ijrmhm.2013.07.002.10.1016/j.ijrmhm.2013.07.002 ↗
44. H. Manshor, S.M. Aris, A.Z.A. Azhar, E.C. Abdullah, and Z.A. Ahmad: Adv. Mater. Res., 2015, vol. 1087, pp. 293–8.10.4028/www.scientific.net/AMR.1087.293 ↗
45. S.A. Dhar, H.T. Mumu, S. Sarker, and A.K.M.B. Rashid: Mater. Today Proc., 2021, vol. 44, pp. 1356–60. https://doi.org/10.1016/j.matpr.2020.11.504.10.1016/j.matpr.2020.11.504 ↗
46. M. Li, W. Li, J. Nie, C. Wang, W. Li, and Z. Xing: J. Mater Sci., 2021, vol. 56, pp. 2887–99. https://doi.org/10.1007/s10853-020-05494-6.10.1007/s10853-020-05494-6 ↗
47. H. Manshor, S.M. Aris, A.Z.A. Azhar, E.C. Abdullah, and Z.A. Ahmad: Ceram Int., 2015, vol. 41(3), pp. 3961–7. https://doi.org/10.1016/j.ceramint.2014.11.080.10.1016/j.ceramint.2014.11.080 ↗
48. J.-F. Xia, H.-Q. Nian, W. Liu, X.-G. Wang, and D.-Y. Jiang: Ceram. Int., 2016, vol. 42(7), pp. 9116–24. https://doi.org/10.1016/j.ceramint.2016.02.176.10.1016/j.ceramint.2016.02.176 ↗
49. J. Chai, Y. Zhu, T. Shen, Y. Liu, L. Niu, S. Li, P. Jin, M. Cui, and Z. Wang: Ceram. Int., 2020, vol. 46(17), pp. 27143–9. https://doi.org/10.1016/j.ceramint.2020.07.194.10.1016/j.ceramint.2020.07.194 ↗
50. A. Nastic, A. Merati, M. Bielawski, M. Bolduc, O. Fakolujo, and M. Nganbe: J. Mater. Sci Technol., 2015, vol. 31 (8), pp. 773–83. https://doi.org/10.1016/j.jmst.2015.06.005.10.1016/j.jmst.2015.06.005 ↗
51. Ecoinvent database. https://www.ecoinvent.org/. Accessed 23 Sept 2021.
52. Steel Products MultiPlate, SuperCor and UltraCor. Environmental Product Declaration Type III ITB No. 127/2020. ViaCon. October 2020.
53. C. Dorn, R. Behrend, D. Giannopoulos, L. Napolano, V. James, A. Herrmann, V. Uhlig, H. Krause, M. Founti, and D.A. Trimis: Procedia CIRP., 2016, vol. 48, pp. 158–63. https://doi.org/10.1016/j.procir.2016.03.146.10.1016/j.procir.2016.03.146 ↗
54. H. Meier, H. Lagemann, F. Morlock, and C. Rathmann: Procedia CIRP., 2013, vol. 11, pp. 99–104. https://doi.org/10.1016/j.procir.2013.07.056.10.1016/j.procir.2013.07.056 ↗
55. J. Tomaszewska: Materials, 2020, vol. 13 (22), pp. 5228. https://doi.org/10.3390/ma1322522810.3390/ma13225228 ↗
56. J. Michalak and B. Michałowski: Energies, 2021, vol. 14 (7), pp. 1941. https://doi.org/10.3390/en1407194110.3390/en14071941 ↗
57. J. Zygmuntowicz, M. Gizowska, J. Tomaszewska, P. Piotrkiewicz, R. Żurowski, M. Wachowski, and K. Konopka: Materials, 2021, vol. 14 (12), pp. 3365. https://doi.org/10.3390/ma1412336510.3390/ma14123365 ↗