journal article·2021-09

The Effect of Homogenization Heat Treatment on the Texture Evolution in U-10Mo Alloy

Benjamin J. Schuessler, David P. Field, Nicole R. Overman, Vineet V. Joshi

Publisher page

Abstract

Uranium alloyed with 10 wt pct Mo (U-10Mo) undergoes discontinuous precipitation (DP) when subjected to sub-eutectoid heat treatment. It is hypothesized that the crystallographic texture of the U-10Mo can be modified to minimize the degree of DP, however, the evolution of texture throughout the manufacturing process is not well understood. Crystallographic textures evolution of two U-10Mo samples homogenized at 900 °C and 1000 °C were investigated after uniaxial rolling and annealing. A total of six samples were analyzed upon rolling using a combination of hot and cold rolling conditions to thickness reductions of 83, 90, and 97 pct and subsequently annealed at 700 °C for 1 hour. Microstructures and textures were analyzed via electron backscatter diffraction (EBSD) for each reduction and post-annealed states. Results show that the U-10Mo exhibits typical rolling textures seen in body-centered cubic materials with prominent α- and γ-fibers with each reduction. After recrystallization, the texture was effectively randomized in all samples. Homogenization temperature showed a minimal impact on the rolling and recrystallization behavior. Potential factors leading to the randomization of texture are discussed along with the implications of textures on the minimization of DP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Nuclear reactor physics and engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. J. Humphreys: Recrystallization and Related Annealing Phenomena, 3rd edn. Elsevier, Amsterdam, 2017
2. H.R.Z. Sandim, J.P. Martins, A.L. Pinto, and A.F. Padilha: Mater. Sci. Eng. A, 2005, vol. 392, pp. 209–21.10.1016/j.msea.2004.09.032 ↗
3. C.G. Oertel, I. Hünsche, W. Skrotzki, A. Lorich, W. Knabl, J. Resch, and T. Trenkwalder: Int. J. Refractory Metals Hard Mater., vol. 28, 2010, pp. 722–7.10.1016/j.ijrmhm.2010.07.003 ↗
4. K. Lücke and M. Hölscher: Textures Microstruct., 1991, vol. 14–18, pp. 585–96.10.1155/TSM.14-18.585 ↗
5. D. Raabe, B. Muelders, G. Gottstein, and K. Luecke: Mater. Sci. Forum, 1994, vol. 157–6, pp. 841–6.10.4028/www.scientific.net/MSF.157-162.841 ↗
6. D.W. Brown, M.A. Okuniewski, B. Clausen, G.A. Moore, and T.A. Sisneros: J. Nucl. Mater., 2016, vol. 474, pp. 8–18.10.1016/j.jnucmat.2016.02.012 ↗
7. V. V. Joshi, E.A. Nyberg, C.A. Lavender, D. Paxton, and D.E. Burkes: J. Nucl. Mater., 2015, vol. 465, pp. 710–8.10.1016/j.jnucmat.2015.07.005 ↗
8. V. Joshi, E. Nyberg, C. Lavender, D. Paxton, and D. Burkes: Process Modeling of U-10wt% Mo Alloys Using Integrated Computational Materials Engineering, Richland WA, 2019.
9. S. Jana, A. Schemer-Korhn, N. Overman, L. Sweet, E. Kautz, C. Lavender, and V. Joshi: Eutectoid Transformation in U10Mo Alloy: Effect of Deformation History and Homogenization Heat Treatment, Richland WA, 2019.10.2172/1503687 ↗
10. E.A. Nyberg, D.E. Burkes, V.V Joshi, and C.A. Lavender: Pacific Northwest Natl. Lab. Report PNNL-24160 (2015)
11. D.E. Burkes, T. Hartmann, R. Prabhakaran, and J.F. Jue: J. Alloys Compd., 2009, vol. 479, pp. 140–7.10.1016/j.jallcom.2008.12.063 ↗
12. D.E. Burkes, C.A. Papesch, A.P. Maddison, T. Hartmann, and F.J. Rice: J. Nucl. Mater., 2010, vol. 403, pp. 160–6.10.1016/j.jnucmat.2010.06.018 ↗
13. D.E. Burkes, R. Prabhakaran, T. Hartmann, J.F. Jue, and F.J. Rice: Nucl. Eng. Des., 2010, vol. 240, pp. 1332–9.10.1016/j.nucengdes.2010.02.008 ↗
14. A. Devaraj, L. Kovarik, E. Kautz, B. Arey, S. Jana, C. Lavender, and V. Joshi: Acta Mater., 2018, vol. 151, pp. 181–90.10.1016/j.actamat.2018.03.039 ↗
15. Y. Park, N. Eriksson, R. Newell, D.D. Keiser, and Y.H. Sohn: J. Nucl. Mater., 2016, vol. 480, pp. 271–80.10.1016/j.jnucmat.2016.08.022 ↗
16. S. Jana, A. Devaraj, L. Kovarik, B. Arey, L. Sweet, T. Varga, C. Lavender, and V. Joshi: J. Alloys Compd., 2017, vol. 723, pp. 757–71.10.1016/j.jallcom.2017.06.292 ↗
17. A. Devaraj, E. Kautz, L. Kovarik, S. Jana, N. Overman, C. Lavender, and V. V. Joshi: Scr. Mater., 2018, vol. 156, pp. 70–4.10.1016/j.scriptamat.2018.07.010 ↗
18. W. Frazier, C. Wang, Z. Xu, N. Overman, S. Hu, and V. V. Joshi: Metall. Mater. Trans. A, 2020, vol. 51, pp. 533–44.10.1007/s11661-019-05582-6 ↗
19. S. Jana, N. Overman, T. Varga, C. Lavender, and V. V. Joshi: J. Nucl. Mater., 2017, vol. 496, pp. 215–26.10.1016/j.jnucmat.2017.09.030 ↗
20. J.F. Jue, B.H. Park, C.R. Clark, G.A. Moore, and D.D. Keiser: Nucl. Technol., 2010, vol. 172, pp. 204–10.10.13182/NT10-A10905 ↗
21. S. Jana, N. Overman, A. Devaraj, L. Sweet, C. Lavender, and V. Joshi: Jom, 2019, vol. 71, pp. 2770–9.10.1007/s11837-019-03588-4 ↗
22. N.R. Overman, S. Jana, D.P. Field, C. Lavender, and V. V. Joshi: J. Nucl. Mater. 10.1016/j.jnucmat.2019.151940.
23. I. Manna, S.K. Pabi, and W. Gust: Int. Mater. Rev., 2001, vol. 46, pp. 53–91.10.1179/095066001101528402 ↗
24. Y.S. Kim, G.L. Hofman, J.S. Cheon, A.B. Robinson, and D.M. Wachs: J. Nucl. Mater., 2013, vol. 437, pp. 37–46.10.1016/j.jnucmat.2013.01.346 ↗
25. S.F. Pugh: J. Nucl. Mater., 1961, vol. 4, 4.10.1016/0022-3115(61)90126-X ↗
26. V.P. Sinha, P. V. Hegde, G.J. Prasad, G.K. Dey, and H.S. Kamath: J. Alloys Compd., 2010, vol. 506, pp. 253–62.10.1016/j.jallcom.2010.06.187 ↗
27. A.J. Clarke, K.D. Clarke, R.J. McCabe, C.T. Necker, P.A. Papin, R.D. Field, A.M. Kelly, T.J. Tucker, R.T. Forsyth, P.O. Dickerson, J.C. Foley, H. Swenson, R.M. Aikin, and D.E. Dombrowski: J. Nucl. Mater., 2015, vol. 465, pp. 784–92.10.1016/j.jnucmat.2015.07.004 ↗
28. V. V. Joshi, E.A. Nyberg, C.A. Lavender, D. Paxton, H. Garmestani, and D.E. Burkes: J. Nucl. Mater., 2015, vol. 465, pp. 805–13.10.1016/j.jnucmat.2013.10.065 ↗
29. G. Cheng, X. Hu, W.E. Frazier, C.A. Lavender, and V. V. Joshi: Mater. Sci. Eng. A, 2018, vol. 736, pp. 41–52.10.1016/j.msea.2018.08.040 ↗
30. H.J. Bunge: Mathematische Methoden Der Texturanalyse. Berli: Akademie-Verlag, 1969.
31. D. Raabe and K. Lücke: Mater. Sci. Forum, 1994, vol. 157–162, pp. 597–610.10.4028/www.scientific.net/MSF.157-162.597 ↗
32. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 2013, vol. 39, pp. 129–72.10.1179/imr.1994.39.4.129 ↗
33. J.H. Cho, A.D. Rollett, J.S. Cho, Y.J. Park, J.T. Moon, and K.H. Oh: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3085–97.10.1007/s11661-006-0189-5 ↗
34. G.R. Stewart, A.M. Elwazri, S. Vue, and J.J. Jonas: Mater. Sci. Technol., 2006, vol. 22, pp. 519–24.10.1179/026708306X81478 ↗
35. A. Hadadzadeh, F. Mokdad, M.A. Wells, and D.L. Chen: Mater. Sci. Eng. A, 2018, vol. 709, pp. 285–9.10.1016/j.msea.2017.10.062 ↗
36. D.W. Brown, M.A. Okuniewski, T.A. Sisneros, B. Clausen, G.A. Moore, and L. Balogh: J. Nucl. Mater., 2016, vol. 482, pp. 63–74.10.1016/j.jnucmat.2016.09.022 ↗
37. E.A. Nyberg, V. V Joshi, C.A. Lavender, D.M. Paxton, and D.E. Burkes: Pacific Northwest Natl. Lab.
38. C. Deng, S.F. Liu, J.L. Ji, X.B. Hao, Z.Q. Zhang, and Q. Liu: J. Mater. Process. Technol., 2014, vol. 214, pp. 462–9.10.1016/j.jmatprotec.2013.09.026 ↗
39. F. Emren, U. von Schlippenbach, and K. Lücke: Acta Metall., 1986, vol. 34, pp. 2105–17.10.1016/0001-6160(86)90156-2 ↗
40. H.M. Chan and F.J. Humphreys: Met. Sci., 1984, vol. 18, pp. 527–9.10.1179/030634584790419700 ↗
41. W.E. Frazier, S. Hu, N. Overman, R. Prabhakaran, C. Lavender, and V. V. Joshi: J. Nucl. Mater., 2019, vol. 513, pp. 56–61.10.1016/j.jnucmat.2018.10.046 ↗
42. O. Engler, X.W. Kong, and P. Yang: Scr. Mater., 1997, vol. 37, pp. 1665–74.10.1016/S1359-6462(97)00315-1 ↗
43. O. Engler: Scr. Mater., 1997, vol. 37, pp. 1675–83.10.1016/S1359-6462(97)00316-3 ↗
44. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
45. S. Takajo, K. Hollis, D. Cummins, E. Tegtmeier, D. Dombrowski, and S. Vogel: Quantum Beam Sci., 2018, vol. 2, p. 12.10.3390/qubs2020012 ↗
46. H.J. Bunge: Texture Analysis in Materials Science. Oxford: Butterworth & Co, 1993.
47. B.L. Adams and D.P. Field: Metall. Trans. A, 1992, vol. 23A, pp. 2501–13.10.1007/BF02658054 ↗