journal article·2021-08

Floating Grain Formation and Macrosegregation in a 2024 Al Alloy Prepared by Hot-Top DC Casting with a 2024 Al Alloy Insert

Cheng Zhu, Zhihao Zhao, Qingfeng Zhu, Gaosong Wang, Xudong Liu, Yubo Zuo, Hanchun Dong, Gaowu Qin

Publisher page

Abstract

For the first time, the method of inserting a 2024 Al alloy rod into a melt of the same alloy during hot-top direct chill casting was used to verify the origin of floating grains and changes in the shape of the sump. Based on the as-cast structure and measured temperature distribution observed, we found that the 2024 Al alloy insert and the grains formed from melt surfaces and the interior walls of the launder or hot-top melted in the high-temperature region of the upper part of the hot-top; additionally, most of the dendrite fragments were captured by feathery grains. We confirmed that the nuclei in the center part of the liquidus isotherm region were able to form coarse-cell dendritic structures in the center part of the slurry zone due to the broad vertical width of this zone. Then, the coarse dendritic structures settled in the mushy zone, and fine dendrites formed in the periphery. In addition, with the insertion of the 2024 Al rod, a hillock-shaped liquidus isotherm was formed in the center part of the slurry zone, and the size of the floating grains in the billet processed with the insert was larger than that in the billet processed without the insert. However, surprisingly, the application of the 2024 Al rod reduced negative centerline segregation because it reduced the horizontal component of shrinkage flow.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. D.G. Eskin, R. Nadella, and L. Katgerman: Acta Mater., 2008, vol. 56, pp. 1358-65.10.1016/j.actamat.2007.11.021 ↗
2. Q.F. Zhu, Z.Z. Zhao, X.J. Wang, and J.Z. Cui: Appl. Mech. Mater., 2012, vol. 117-119, pp. 1531-34.10.4028/www.scientific.net/AMM.241-244.1531 ↗
3. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421-80.10.1016/j.pmatsci.2007.10.001 ↗
4. D.G. Eskin: Physical Metallurgy of Direct Chill Casting of Aluminum Alloys, CRC Press, Boca Raton, 2008.10.1201/9781420062823 ↗
5. D.G. Eskin, J. Zuidema, V.I. Savran, and L. Katgerman: Mater. Sci. Eng. A, 2004, vol. 384, pp. 232-44.10.1016/j.msea.2004.05.066 ↗
6. I. Suyitno, D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3551–61.10.1007/s11661-004-0192-7 ↗
7. D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1965-76.10.1007/s11661-005-0059-6 ↗
8. R. Nadella, D.G. Eskin, and L. Katgerman: Metall. Mater. Trans. A, 2008, vol. 39, pp. 450-61.10.1007/s11661-007-9423-z ↗
9. X.D. Liu, Q.F. Zhu, T. Jia, Z.H. Zhao, J.Z. Cui, and Y.B. Zuo: J. Mater. Eng. Perform. 2020, vol. 29, pp. 6840-6848.10.1007/s11665-020-05140-x ↗
10. C.J. Vreeman, M.J.M. Krane, and F.P. Incropera: Int. J. Heat Mass Transfer., 2000, vol. 43, pp. 677-86.10.1016/S0017-9310(99)00174-X ↗
11. Y.Q. Xiao: Practical Manual of Aluminum Processing Technology, Metallurgical Industry Press, Beijing, 2005.
12. C.J. Vreeman, J.D. Schloz, and M.J.M. Krane: J. Heat Transfer, 2002, vol. 124, pp. 947-53.10.1115/1.1482089 ↗
13. E.F. Emley: Int. Mater. Rev., 1976, vol. 21, pp. 75-115.10.1179/imr.1976.21.1.75 ↗
14. Q.F. Zhu, Z.Z. Zhao, Y.B. Zuo, X.J. Wang, and J.Z. Cui: Acta Metall. Sin. Engl. Lett., 2012, vol. 25, pp. 453–60.
15. V.I. Napalkov, G.V. Cherepok, S.V. Makhova, and Yu.M. Chernovol: Continuous Casting of Aluminum Alloys, Intermet Engineering, Moscow, 2005.
16. M. Javidani, M. Fortier, and J. Colbert: in Light Metals 2019, C. Chesonis, ed., TMS, San Antonio, 2019, pp. 451-59.10.1007/978-3-030-05864-7_58 ↗
17. J. Hutt and D. StJohn: Int. J. Cast Met. Res., 1998, vol. 11, pp. 13-22.10.1080/13640461.1998.11819254 ↗
18. C.J. Vreeman and F.P. Incropera: Int. J. Heat Mass Transfer., 2000, vol. 43, pp. 687-704.10.1016/S0017-9310(99)00175-1 ↗
19. A.M. Glenn, S.P. Russo, and P.J.K. Paterson: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1513-23.10.1007/s11661-003-0263-1 ↗
20. M.G. Chu and J.E. Jacoby: in Light metals 1990, C.M. Bickert, ed., TMS, Warrendale, 1990, pp. 819-24.
21. A. Håkonsen, J.E. Hafsås, and L. Rune: in Light Metals 2014, J. Grandfield, ed., TMS, San Diego, 2014, pp. 873-78.10.1002/9781118888438.ch146 ↗
22. V.I. Danilov and V.E. Neimark: Metallurg, 1938, vol. 10, pp. 34-43.
23. G.F. Balandin: in Formation of Grain Structure in Castings, Mashinostroenie, Moscow, 1973, pp. 225-227.
24. D.G Eskin and F. Wang: Metals, 2019, vol. 9, pp. 161-168.10.3390/met9020161 ↗
25. A.M. Madyanov: in Suspension Casting, Metallurgizdat, Moscow, 1969.
26. S.S. Zatulovsky: in Suspension Casting, Naukova Dumka, Kiev, 1981.
27. W. Schmidt and V. Richmond: Method of Solidifying Molten Metal, U.S. Patent, No. 3247557, 26 April 1966.
28. A.M. Talbot and H.W. Soller: Method of Internal Nucleation of a Casting, U.S. Patent, No. 3662810, 16 May 1972.
29. Q.P. Dong, Y.B. Yin, Z. Zhu, and H. Nagaumi: Materials, 2020, vol. 13, pp. 5379-5394.10.3390/ma13235379 ↗
30. R. Genders: J. Inst. of Metals, 1926, vol. 35, pp. 259-293.
31. B. Chalmers: J. Aust. Inst. of Metals, 1963, vol. 8, pp. 255-261.
32. A. Ohno, T. Motegi, and H. Soda: Tran. Iron. Steel Inst. Jpn., 1971, vol. 11, pp. 18-23.10.2355/isijinternational1966.11.18 ↗
33. R.T. Southin: Trans. Met. Soc. AIME, 1967, vol. 239, pp. 220-225.
34. K. Jackson, J. Hunt, D. Uhlmann, and T. Seward: Trans. TMS-AIME, 1966, vol. 236, pp. 149-158.
35. B.I. Bondarev, V.I. Napalkov, and V.I. Tararayshkin: in Modification of Aluminum Wrought Alloys, Metallurgiya, Moscow, 1979, pp. 96-98.
36. R.C. Dorward and D.J. Beerntsen: in Light metals 1990, C.M. Bickert, ed., TMS, Warrendale, 1990, pp. 825–30.
37. R. Nadella, D.G. Eskin, and L. Katgerman: Mater. Sci. Forum, 2006, vol. 519-521, pp. 1841-46.10.4028/www.scientific.net/MSF.519-521.1841 ↗
38. V. Hatic, B. Mavric, N. Kosnik, and B.Sarler: Appl. Math. Model., 2018, vol. 54, pp. 170-88.10.1016/j.apm.2017.09.034 ↗
39. D.G. Eskin, Q. Dua, and L. Katgerman: Scr. Mater., 2006, vol. 55, pp. 715-718.10.1016/j.scriptamat.2006.06.021 ↗