Effect of Pre-induced Plastic Strains on the Corrosion Behavior of Reinforcing Bar in 3.5 pct NaCl Solution
Source abstract
Abstract
Reinforcing steel bar (rebar) is subjected to various levels of strains during service in reinforced concrete (RC) construction. This work aims at understanding the effect of pre-induced plastic strains on the corrosion behavior of a reinforcing steel bar (rebar) by doing electrochemical tests (electrochemical impedance and potentiodynamic polarization) in freely aerated 3.5 pct NaCl solution and cyclic salt-fog test. The interplay between the corrosion products and the corroding tendency of the strained rebars as a function of exposure time is analyzed. The plastic strains have strong effect on the composition of the rusts and polarization resistance of the rusted rebars.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. L.A. Erasmus: Concr. Int., 1981, vol. 3, pp. 47–52
2. K. Babaei and N.M. Hawkins: Concr. Int., 1992, vol. 14, pp. 67–72
3. S.R. Humphreys and A.L. Felder, Technical Note CTN-G-1-14 (CRSI, Schaumburg, Illinois), 2014, pp. 1–12
4. ACI committee: Report No. 318R-14, ACI, Farmington Hills, MI, September 2014.
5. J.P. Broomfield: Corrosion of Steel in Concrete – Understanding, Investigation and Repair, 2nd edn. (Taylor & Francis, Oxon), 2007, pp. 6–10
6. Z.P. Bažant: J. Struct. Div., 1979, vol. 105, pp. 1137–5310.1061/JSDEAG.0005168 ↗
7. A.S. Al-Harthy and M.G. Stewart: J. Mullard, Mag. Concr. Res., 2011, vol. 63, pp. 655–6710.1680/macr.2011.63.9.655 ↗
8. Y. Zhou, B. Gencturk, K. Willam, and A. Attar: J. Mater. Civ. Eng., 2015, vol. 27, pp. 0401424510.1061/(ASCE)MT.1943-5533.0001209 ↗
9. S. Yoon, K. Wang, W.J. Weiss and S.P. Shah: ACI Struct. J., 2000, vol. 97, pp. 637–44
10. T. El Maaddawy, K. Soudki and T. Topper: ACI Struct. J., 2005, vol. 102, pp. 649–56
11. G. Malumbela, M. Alexander and P. Moyo: Eng. Struct., 2009, vol. 31 , pp. 2518–2510.1016/j.engstruct.2009.07.016 ↗
12. A. Ababneh and M. Sheban: Mater. Struct. Constr., 2011, vol. 44, pp. 1123–3710.1617/s11527-010-9688-3 ↗
13. Y. Du, M. Cullen and C. Li: Constr. Build. Mater., 2013, vol. 39, pp. 148–5210.1016/j.conbuildmat.2012.05.006 ↗
14. J. Dong, Y. Zhao, K. Wang and W. Jin: Constr. Build. Mater., 2017, vol. 151, pp. 208–1910.1016/j.conbuildmat.2017.05.193 ↗
15. C. Fu, N. Jin, H. Ye, X. Jin and W. Dai: Corros. Sci., 2017, vol. 117, pp. 11–2310.1016/j.corsci.2017.01.002 ↗
16. S. Zhang, X. Pang, Y. Wang and K. Gao: Corros. Sci., 2013, vol. 75, pp. 293–9910.1016/j.corsci.2013.06.012 ↗
17. X. Feng, X. Lu, Y. Zuo, N. Zhuang and D. Chen: Corros. Sci., 2016, vol. 103, pp. 66–7410.1016/j.corsci.2015.11.006 ↗
18. H. Li and X. Wu: J. Mater. Civ. Eng., 2018, vol. 30, pp. 0401731110.1061/(ASCE)MT.1943-5533.0002167 ↗
19. E.M. Gutman: Mechanochemistry and Corrosion Prevention of METALS (Science Publication in Chinese, Peking), 1989
20. C.A. Apostolopoulos and D. Michalopoulos: Mater. Corros., 2007, vol. 58, pp. 1–12
21. Y. Zhang and A. Poursaee: J. Mater. Civ. Eng., 2015, vol. 27, pp. 0401423410.1061/(ASCE)MT.1943-5533.0001199 ↗
22. X. Feng, Y. Zuo, Y. Tang, X. Zhao and X. Lu: Electrochim. Acta., 2011, vol. 58, pp. 258–6310.1016/j.electacta.2011.09.035 ↗
23. X. Feng, Y. Tang and Y. Zuo: Corros. Sci., 2011, vol. 53, pp. 1304–1110.1016/j.corsci.2010.12.030 ↗
24. P.K. Behera, A.P.K. Moon, K. Mondal and S. Misra: J. Mater. Civ. Eng., 2016, vol. 28, pp. 0401615810.1061/(ASCE)MT.1943-5533.0001666 ↗
25. B. Eghbali: Mater. Lett., 2007, vol. 61, pp. 4006–1010.1016/j.matlet.2007.01.019 ↗
26. S. Torizuka, A. Ohmori, S.V.S.N. Murthy and K. Nagai: Scripta Mater., 2006, vol. 54, pp. 563–6810.1016/j.scriptamat.2005.10.055 ↗
27. S. Choudhary, V. Nanda, S. Shekar, A. Garg and K. Mondal: J. Mater. Eng. Perform., 2017, vol. 26, pp. 185–9410.1007/s11665-016-2465-x ↗
28. K. Suda, S. Misra and K. Motohashi: Corros. Sci., 1993, vol. 35, pp. 1543–4910.1016/0010-938X(93)90382-Q ↗
29. S.J. Jaffer and C.M. Hansson: Cem. Concr. Res., 2009, vol. 39, pp. 116–2510.1016/j.cemconres.2008.11.001 ↗
30. T.D. Marcotte and C.M. Hansson: Mater. Struct. Constr., 2007, vol. 40, pp. 325–4010.1617/s11527-006-9170-4 ↗
31. J.K. Singh and D.D.N. Singh: Corros. Sci., 2012, vol. 56, pp. 129–4210.1016/j.corsci.2011.11.012 ↗
32. S. Choudhary, A. Garg and K. Mondal: J. Mater. Eng. Perform., 2016, vol. 25, pp. 2969–7610.1007/s11665-016-2112-6 ↗
33. P. Dillmann, F. Mazaudier and S. Hœrlé: Corros. Sci., 2004, vol. 46, pp. 1401–2910.1016/j.corsci.2003.09.027 ↗
34. M. Yamashita, H. Miyuki, Y. Matsuda, H. Nagano and T. Misawa: Corros. Sci., 1994, vol. 36, pp. 283–9910.1016/0010-938X(94)90158-9 ↗
35. T. Kamimura, S. Hara, H. Miyuki, M. Yamashita and H. Uchida: Corros. Sci., 2006, vol. 48, pp. 2799–1210.1016/j.corsci.2005.10.004 ↗
36. ASTM Committee: Report No. B117-18, ASTM International, (West Conshohocken, PA), 2003.
37. P.K. Katiyar, S. Misra and K. Mondal: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1489–0110.1007/s11661-018-5086-1 ↗
38. P.K. Katiyar, P.K. Behera, S. Misra and K. Mondal: Met. Mater. Int., 2019, vol. 25, pp. 1209–2610.1007/s12540-019-00288-1 ↗
39. BIS committee: Report No. IS: 1608, (Bureau of Indian Standards, New Delhi, India), 2005.
40. W.D. Callister Jr. and D.G. Rethwisch: Materials Science and Engineering, 8th edn, (John Wiley Sons Inc, New York), 2009
41. E. Gadalińska, A. Baczmański, C. Braham, G. Gonzalez, H. Sidhom, S. Wroński, T. Buslaps and K. Wierzbanowki: Int. J. Plast, 2020, vol. 127, pp. 10265110.1016/j.ijplas.2019.102651 ↗
42. S. Sharma, S. Sangal and K. Mondal: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6088–0210.1007/s11661-014-2555-z ↗
43. ASTM Committee: Report No. G102-89, (ASTM International West Conshohocken, PA), 2016.
44. J. Shi and J. Ming: Int. J. Miner. Metall. Mater., 2017, vol. 24, pp. 64–7410.1007/s12613-017-1379-4 ↗
45. J. Shi, J. Ming and W. Sun: J. Mater. Civ. Eng., 2018, vol. 30, pp. 0401821210.1061/(ASCE)MT.1943-5533.0002423 ↗
46. L. Veleva: Corrosion Tests and Standards: Application and Interpretation, second edition (edited by R. Baboian; Section Editor: H.P. Hack), ASTM International, Pennsylvania, January 2005, page 392.
47. J.A.S. Greene and R.N. Parkins: Corrosion, 1968, vol. 24, pp. 66–6910.5006/0010-9312-24.3.66 ↗
48. A.J. Bard and L.R. Faulkner: Electrochemical Methods: Fundamentals and Applications, 2nd edn. (John Wiley Sons Inc, New York), 2001
49. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. Section A, 1949, vol. 62, pp. 49–6210.1088/0370-1298/62/1/308 ↗
50. C.W. Richards: Engineering Materials Science, 2nd edn. (Chapman and Hall, Wardsworth Publishing Company, London), 1968
51. T. Wu, M. Yan, J. Xu, Y. Liu, C. Sun and W. Ke: Corros. Sci., 2016, vol. 108, pp. 160–6810.1016/j.corsci.2016.03.011 ↗
52. Y. Wang, W. Zhao, H. Ai, X. Zhou and T. Zhang: Corros. Sci., 2011, vol. 53, pp. 2761–6610.1016/j.corsci.2011.05.011 ↗
53. L.Y. Xu and Y.F. Cheng: Corros. Sci., 2012, vol. 64, pp. 145–5210.1016/j.corsci.2012.07.012 ↗
54. E.M. Gutman: Mechanochemistry of Materials (Cambridge International Science Publication, Cambridge, UK), 1998
55. R. Balasubramaniam, A.V. Ramesh Kumar and P. Dillmann: Curr. Sci., 2003, vol. 85, pp. 1546–55
56. T. Misawa, K. Asami, K. Hashimoto and S. Shimodaira: Corros. Sci., 1974, vol. 14, pp. 279–8910.1016/S0010-938X(74)80037-5 ↗
57. M. Stratmann, K. Bohnenkamp and H.J. Engell: Corros. Sci., 1983, vol. 23, pp. 969–8510.1016/0010-938X(83)90024-0 ↗
58. A. Raman, S. Nasrazadani and L. Sharma: Metallography, 1989, vol. 22, pp. 79–9610.1016/0026-0800(89)90024-4 ↗
59. K. Xiao, C. Dong, X. Li and F. Wang: J. Iron Steel Res. Int., 2008, vol. 15, pp. 42–4810.1016/S1006-706X(08)60247-2 ↗
60. X. Zhang, S. Yang, W. Zhang, H. Guo and X. He: Corros. Sci., 2014, vol. 82, pp. 165–7210.1016/j.corsci.2014.01.016 ↗
61. L.T. Mammoliti, L.C. Brown, C.M. Hansson and B.B. Hope: Cem. Concr. Res., 1996, vol. 26, pp. 551–5610.1016/0008-8846(96)00018-X ↗
62. H. Bensabra and S. Belkhair: Alg. J. Mat. Chem., 2018, vol. 1, pp. 16–28
63. J. Ahlström, J. Tidblad, L. Tang, B. Sederholm and S. Leijonmarck: Int. J. Corros., 2018, vol. 2, pp. 5623504
64. J. Avila-Mendoza, J.M. Flores and U.C. Castillo: Corrosion, 1994, vol. 50, pp. 879–8510.5006/1.3293478 ↗