journal article·2020-12

The Growth Pattern of Co3Sn2 in Directional Solidification of Co-Sn Hypereutectic Alloy Melts

J. L. Kang, J. F. Li

Publisher page

Abstract

Co70Sn30 hypereutectic alloy was directionally solidified at various velocities at temperature gradients of 200 and 300 K/cm. At a given temperature gradient, α-Co/β-Co3Sn2 lamellar eutectic grows with a planar interface when the withdrawal velocity is small. The increases of withdrawal velocity result in primary β-Co3Sn2 phase growing ahead of the eutectic, and its morphology changes from dendritic pattern to fractal seaweed pattern above a critical withdrawal velocity. The rise of the temperature gradient narrows the withdrawal velocity range within which primary β-Co3Sn2 phase can grow in the dendritic pattern. The tip-splitting frequency of the β-Co3Sn2 seaweed vs growth velocity shows a power law $$ f \propto V^{{{3 \mathord{\left/ {\vphantom {3 2}} \right. \kern-0pt} 2}}} $$ The change of the primary arm spacing of β-Co3Sn2 with the growth velocity follows $$ d1 = k1 V^{{ - e1 }} , $$ where the exponent e1 is larger for seaweed growth than for dendritic growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. B. Nenchev, J. Strickland, K. Tassenberg, S. Perry, S. Gill, and H.B. Dong: J. Imaging, 2020, vol. 6, p. 19.10.3390/jimaging6040019 ↗
2. J.F. Li, W.Q. Jie, S. Zhao, and Y.H. Zhou: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1806–16.
3. L.J. Liu, X.X. Wei, M. Ferry, and J.F. Li: Scripta Mater., 2020, vol. 174, pp. 72–76.10.1016/j.scriptamat.2019.08.034 ↗
4. S. Zhao, J. Li, L. Liu, and Y. Zhou: J. Alloys Compd., 2009, vol. 478, pp. 252–56.10.1016/j.jallcom.2008.12.054 ↗
5. J.H. Li, J. Li, O. Renk, R. Pippan, and P. Ghosh: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 368–79.10.1007/s11661-019-05515-3 ↗
6. L. Yang, Z. Zhou, J. Qian, X. Ge, J. Li, Q. Hu, and J. Li: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4229–36.10.1007/s11661-017-4179-6 ↗
7. J. Strickland, B. Nenchev, and H.B. Dong: Cryst., 2020, vol. 10, p. 627.10.3390/cryst10070627 ↗
8. Kurz W, Rappaz M, Trivedi R (2020) Int Mater Rev. https://doi.org/10.1080/09506608.2020.175789410.1080/09506608.2020.1757894 ↗
9. A. Pocheau, J. Deschamps, and M. Georgelin: JOM, 2007, vol. 59, pp. 71–76.10.1007/s11837-007-0093-5 ↗
10. S. Akamatsu and G. Faivre: Phys. Rev. E, 1998, vol. 58, pp. 3302–15.10.1103/PhysRevE.58.3302 ↗
11. S. Akamatsu, G. Faivre, and T. Ihle: Phys. Rev. E, 1995, vol. 51, pp. 4751–73.10.1103/PhysRevE.51.4751 ↗
12. B. Utter and E. Bodenschatz: Phys. Rev. E, 2002, vol. 66, p. 051604.10.1103/PhysRevE.66.051604 ↗
13. Y.M. Wang, S.M. Li, Z.P. Liu, H. Zhong, L. Xu, and H. Xing: J. Mater. Sci. Technol., 2019, vol. 35, pp. 1309–14.10.1016/j.jmst.2019.03.004 ↗
14. Y.M. Wang, S.M. Li, B. Yang, Z.P. Liu, H. Zhong, H. Xing, and H.M. Wang: Mater. Sci. Eng. A, 2020, vol. 771, p. 138665.10.1016/j.msea.2019.138665 ↗
15. M. Amoorezaei, S. Gurevich, and N. Provatas: Acta Mater., 2012, vol. 60, pp. 657–63.10.1016/j.actamat.2011.10.006 ↗
16. H. Xing, X. Dong, H. Wu, G. Hao, J. Wang, C. Chen, and K. Jin: Sci. Rep., 2016, vol. 6, p. 26625.10.1038/srep26625 ↗
17. H. Xing, M.Y. Ji, X.L. Dong, Y.M. Wang, L.M. Zhang, and S.M. Li: Mater. Des., 2020, vol. 185, p. 108250.10.1016/j.matdes.2019.108250 ↗
18. Y.B. Wang, S.S. Jia, M.G. Wei, L.M. Peng, Y.J. Wu, Y.Z. Ji, L.Q. Chen, and X.T. Liu: J. Alloys Compd., 2020, vol. 815, p. 152385.10.1016/j.jallcom.2019.152385 ↗
19. A.M. Mullis, K.I. Dragnevski, and R.F. Cochrane: Mater. Sci. Eng. A, 2004, vols. 375–377, pp. 157–62.10.1016/j.msea.2003.10.139 ↗
20. E.G. Castle, A.M. Mullis, and R.F. Cochrane: Acta Mater., 2014, vol. 66, pp. 378–87.10.1016/j.actamat.2013.11.027 ↗
21. E.G. Castle, A.M. Mullis, and R.F. Cochrane: Acta Mater., 2014, vol. 77, pp. 76–84.10.1016/j.actamat.2014.05.043 ↗
22. N. Haque, R.F. Cochrane, and A.M. Mullis: J. Alloys Compd., 2017, vol. 707, pp. 327–31.10.1016/j.jallcom.2016.11.080 ↗
23. N. Haque and A.M. Mullis: J. Alloys Compd., 2019, vol. 801, pp. 640–44.10.1016/j.jallcom.2019.06.050 ↗
24. J.B. Zhang, H.F. Wang, F. Zhang, X.L. Lü, Y.C. Zhang, and Q. Zhou: J. Alloys Compd., 2019, vol. 781, pp. 13–25.10.1016/j.jallcom.2018.11.415 ↗
25. L. Liu, J.F. Li, and Y.H. Zhou: Acta Mater., 2011, vol. 59, pp. 5558–67.10.1016/j.actamat.2011.05.028 ↗
26. X. Ma and L. Liu: Mater. Des., 2015, vol. 83, pp. 138–43.10.1016/j.matdes.2015.06.010 ↗
27. J.L. Kang, W.Q. Xu, X.X. Wei, M. Ferry, and J.F. Li: J. Alloys Compd., 2017, vol. 695, pp. 1498–1504.10.1016/j.jallcom.2016.10.289 ↗
28. J.L. Kang, W.Q. Xu, X.X. Wei, M. Ferry, and J.F. Li: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 6187–96.10.1007/s11661-016-3722-1 ↗
29. M. Gündüz and E. Çadırlı: Mater. Sci. Eng. A, 2002, vol. 327, pp. 167–85.10.1016/S0921-5093(01)01649-5 ↗
30. T. Ihle and H. Müller-Krumbhaar: Phys. Rev. E, 1994, vol. 49, pp. 2972–91.10.1103/PhysRevE.49.2972 ↗
31. D.M. Stefanescu: Science and Engineering of Casting Solidification, 2nd ed., Springer, New York, NY, 2009.
32. L. Pauling: The Nature of the Chemical Bond, Cornell University Press, Ithaca, NY, 1960, pp. 221–57.
33. Y. Guo, R. Yu, R. Zhang, X. Zhang, and K. Tao: J. Phys. Chem. B, 1998, vol. 102, pp. 9–16.10.1021/jp9714781 ↗
34. H. Assadi, M. Oghabi, and D.M. Herlach: Acta Mater., 2009, vol. 57, pp. 1639–47.10.1016/j.actamat.2008.12.004 ↗
35. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, pp. 109–16.10.1016/0022-0248(74)90127-4 ↗
36. E. Brener, H. Muller-Krumbhaar, and D. Temkin: Phys. Rev. E, 1996, vol. 52, pp. 2714–22.10.1103/PhysRevE.54.2714 ↗
37. B. Wei and D.H. Herlach: Mater. Sci. Eng. A, 1993, vol. 173, pp. 357–61.
38. B. Utter, R. Ragnarsson, and E. Bodenschatz: Phys. Rev. Lett., 2001, vol. 86, pp. 4604–07.10.1103/PhysRevLett.86.4604 ↗
39. N. Provatas, Q. Wang, M. Haataja, and M. Grant: Phys. Rev. Lett., 2003, vol. 91, p. 155502.10.1103/PhysRevLett.91.155502 ↗
40. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
41. J. Feng, W.D. Huang, X. Lin, Q.Y. Pan, T. Li, and Y.H. Zhou: J. Mater. Sci. Lett., 1999, vol. 18, pp. 29–31.10.1023/A:1006613023683 ↗
42. D. Ma, Y. Li, S.C. Ng, and H. Jones: Adv. Mater., 2001, vol. 2, pp. 127–30.
43. Y. Miyata, T. Suzuki, and J.I. Uno: Metall. Trans. A, 1985, vol. 16A, pp. 1799–1805.10.1007/BF02670367 ↗
44. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444–51.10.1063/1.1713333 ↗