journal article·2020-08

Fabrication and Characterization of Nanostructured AACVD Thin Films on 316L SS as Surface Protective Layers in Simulated Body Fluid

A. Madhan Kumar, Muhammad Ali Ehsan, Rami K. Suleiman, Abbas Saeed Hakeem

Publisher page

Abstract

The surface of implant materials is one of the most significant factors for controlling the interaction between biomaterials and bone tissues. Hence, enhancing the clinical performance of bio-implants is being widely focused worldwide. Herein, we report that nanostructured silver (Ag) coatings prepared on medical grade 316L stainless steel (SS) substrates are promising implant/surgical materials for orthopedic applications. Homogeneous nanoparticle-shaped silver thin films as a function of growth time (15 to 60 minutes) were developed at a temperature of 450 °C through aerosol-assisted chemical vapor deposition (AACVD) using a silver (I) acetate solution. All silver films were characterized using various surface and structural analysis techniques to confirm the phase and stoichiometric purity of the coating. Scanning electrochemical microscopy experiments were conducted to inspect the initial degradation of silver films on 316L SS substrates in simulated body fluid (SBF). Corrosion assessments in the SBF medium indicated that all the coated 316L SS substrates under study exhibited higher corrosion resistance than the uncoated ones; in particular, Ag films grown in 30 minutes showed the highest corrosion resistance among the other silver coatings produced under different conditions. The better corrosion performance of the Ag-30 sample was attributed to the dense, compact silver layer obtained in 30 minutes of deposition utilizing the AACVD technique.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. R. Bosco, J. Van Den Beucken, S. Leeuwenburgh, J. Jansen: Coatings, 2012, vol. 2, pp. 95–119.10.3390/coatings2030095 ↗
2. K. Prasad, O. Bazaka, M. Chua, M. Rochford, L. Fedrick, J. Spoor, R. Symes, M. Tieppo, C. Collins, A. Cao, D. Markwell: Materials, 2017, vol. 10, pp. 1-33.10.3390/ma10080884 ↗
3. K.P. Ananth, A.J. Nathanael, S.P. Jose, T. H. Oh, D. Mangalaraj: Mater. Sci. Eng. C, 2016, vol. 59, pp. 1110–1124.10.1016/j.msec.2015.10.045 ↗
4. A. Parsapour, S. N. Khorasani, M.H. Fathi: J. Mater. Sci. Techno. 2012, vol. 28, pp. 125–131.10.1016/S1005-0302(12)60032-2 ↗
5. A. M. Kumar, B. Suresh, S. Das, I.B. Obot, A.Y. Adesina, S. Ramakrishna: Carbohyd. Polym. 2017, vol. 173, pp. 121–130.10.1016/j.carbpol.2017.05.083 ↗
6. G.S. Kaliaraj, V. Vishwakarma, K. Alagarsamy, A.K. Kirubaharan: Ceram. Inter. 2018, vol. 44, pp. 14940–14946.10.1016/j.ceramint.2018.05.103 ↗
7. S.A.X. Stango, D. Karthick, S. Swaroop, U.K. Mudali, U. Vijayalakshmi: Ceram. Inter. 2018, vol. 44, pp. 3149–3160.10.1016/j.ceramint.2017.11.083 ↗
8. V. Barranco, A. Jimenez-Morales, E. Peon, G.J. Hickman, C.C. Perry, J. C. Galvan: J. Mater. Chem. B, 2014, vol. 2, pp. 3886–3896.10.1039/C4TB00173G ↗
9. K.L.Choy, Prog. Mater. Sci. 2003, vol. 48, pp. 57–170.10.1016/S0079-6425(01)00009-3 ↗
10. N.M. Santos, T.M. Gonçalves, J. De Amorim, C.M. Freire, J.R. Bortoleto, S. F. Durrant, R. P. Ribeiro, N. C. Cruz, E. C. Rangel (2017) Surf. Coat. Technol. vol. 311, pp. 127–137.10.1016/j.surfcoat.2016.12.113 ↗
11. Y.S. Kim, H. Jeon, Y. DoKim, W.M. Kim (2000) J. Korean Phys. Soc. vol. 37, pp. 1045–1050.10.3938/jkps.37.1045 ↗
12. C. Anandan, L. Mohan, P.D. Babu: Appl. Surf. Sci. 2014, vol. 296, pp. 86–94.10.1016/j.apsusc.2014.01.049 ↗
13. P. Pizá-Ruiz, A. Saenz-Trevizo, Y. Verde-Gomez, P. Amezaga-Madrid, M. Miki-Yoshida, Dela Fossite: Ceram. Inter. 2019, vol. 45, pp. 1156–1162.10.1016/j.ceramint.2018.09.298 ↗
14. M. Anusha, D. Arivuoli: J. Alloys Comp. 2013, vol. 580, pp. 131–136.10.1016/j.jallcom.2013.05.073 ↗
15. S. Shaukat, M. Khaleeq-ur-Rahman, I.M. Dildar, R. Binions: Ceram. Inter. 2019, vol. 45, pp. 1918-1927.10.1016/j.ceramint.2018.10.084 ↗
16. C.S. Chua, O.K. Tan, M.S. Tse, X. Ding: Thin Solid Films, 2013, vol. 544, pp. 571–575.10.1016/j.tsf.2012.12.066 ↗
17. M.H. Wong, H.C. Man: Mater. Let. 2018, vol. 229, pp. 229–231.10.1016/j.matlet.2018.07.003 ↗
18. P. Sikder, N. Koju, Y. Ren, V.K. Goel, T. Phares, B. Lin, S. B. Bhaduri: Surf. Coat. Technol. 2018, vol. 342, pp. 105–116.10.1016/j.surfcoat.2018.02.100 ↗
19. Q.L. Feng, J. Wu, G.Q. Chen, F.Z. Cui, T.N. Kim, J.O. Kim: J. Biomed. Mater. Res. 2000, vol. 52, pp. 662–668.10.1002/1097-4636(20001215)52:4<662::AID-JBM10>3.0.CO;2-3 ↗
20. J. Hardes, H. Ahrens, C. Gebert: Biomater. 2007, vol. 28, pp. 2869–2875.10.1016/j.biomaterials.2007.02.033 ↗
21. S.C.Dixon, J.A. Manzi, M.J. Powell, C.J. Carmalt, I.P. Parkin: ACS Appl. Nano Mater. 2018, vol.17, pp. 3724–3732.10.1021/acsanm.8b00949 ↗
22. M.A. Ehsan, M.A. Aziz, A. Rehman, A.S. Hakeem, M.A.A. Qasem, S.H.A. Ahmad: J. Electrochem. Soc. 2018, vol. 165, pp. B302–B309.10.1149/2.1141807jes ↗
23. K.S. Joya, M.A. Ehsan, M. Sohail, Z.H. Yamani: J. Mater. Chem. A, 2019, vol. 7, pp. 9137–9144.10.1039/C9TA01198F ↗
24. MN Main, S Schneider, MR Salata, T Marks (2008) J. Inorg. Chem. vol. 47, pp. 2534−2542.10.1021/ic701852x ↗
25. P.J. Malinowski, Z. Mazej, M. Derzsi, Z. Jaglicic, J. Szydlowska, T. Gilewski, W. Grochala, Cryst. Eng. Comm. 2011, vol. 13, pp. 6871–6879.10.1039/c1ce05712j ↗
26. S.D. Ponja, S.K. Sehmi, E. Allan, A.J. Macrobert, I.P. Parkin, C. Carmalt (2015) J. ACS Appl. Mater. Inter. vol. 7, pp. 28616–28613.10.1021/acsami.5b10171 ↗
27. V.K. Kaushik: J. Electron Spectrosc. Relat Phenom. 1991, vol. 56, pp. 273−277.10.1016/0368-2048(91)85008-H ↗
28. X.Y. Gao, S.Y. Wang, J. Li, Y.X. Zheng, R.J. Zhang, P. Zhou, Y.M. Yang, L.Y. Chen: Thin Solid Films, 2004, vol. 455, pp. 438–442.10.1016/j.tsf.2003.11.242 ↗
29. R. Binions, I.P. Parkin: Intech Open. 2011, vol. 5017, pp. 611−638.
30. A. A. Tahir, M. A. Ehsan, M. Mazhar, K. U. Wijayantha, M. Zeller, A. D. Hunter: Chem Mater. 2010, vol. 22, pp. 5084–5092.10.1021/cm101642b ↗
31. M. A. Ehsan, H. N. Ming, M. Misran, Z. Arifin, E. R. Tiekink, A. P. Safwan, M. Mazhar: Chem. Vapor Dep. 2012, vol.18, pp. 191–200.10.1002/cvde.201206988 ↗
32. A. M. Kumar, R. SBS Ramakrishna, A L.F. DeBarros (2017) Synth. Met. vol. 234, pp. 18–28.10.1016/j.synthmet.2017.10.003 ↗
33. A. M. Kumar, N. Rajendran (2012) Surf. Coat. Technol. vol. 213, pp. 155–166.10.1016/j.surfcoat.2012.10.039 ↗
34. V.S. Dhandapani, E. Thangavel, M. Arumugam, K. S. Shin, V. Veeraraghavan, S. Y. Yau, C. Kim, D.-E. Kim: Surf. Coat. Technol. 2014, vol. 240, pp. 128–136.
35. S.M. Hoseinieh, A.M. Homborg, T. Shahrabi, J.M.C. Mol, B. Ramezanzadeh: Electrochim Acta 2016, vol. 217, pp. 226–241.10.1016/j.electacta.2016.08.146 ↗
36. Z. Sanaei, B. Ramezanzadeh, T. Shahrabi: Appl. Surf. Sci. 2018, vol. 454, pp. 1–15.10.1016/j.apsusc.2018.05.077 ↗
37. X. Lv, X. Li, N. Li, H. Zhang, Y. Zheng, Jiaojiao Wu, X. Tao: Surf. Coat. Technol. 2019, vol.358, pp. 443–451.10.1016/j.surfcoat.2018.11.045 ↗
38. A. M. Kumar, A. Khan, R. Suleiman, M. Qamar, S. Saravanan, H. Dafalla (2018) Prog. Org. Coat. vol. 114, pp. 9–18.10.1016/j.porgcoat.2017.09.013 ↗
39. N. Parhizkar, B. Ramezanzadeh, T. Shahrabi: Appl. Surf. Sci. 2018, vol. 439, pp. 45–59.10.1016/j.apsusc.2017.12.240 ↗
40. A.C. Bastos, A.M. Simoes, S. Gonzalez, Y. Gonzalez-Garc, R.M. Souto: Prog. Org. Coat. 2005, vol. 53, pp. 177–182.10.1016/j.porgcoat.2005.02.005 ↗
41. Vinod Upadhyay, Dante Battocchi: Prog. Org. Coat. 2016, vol.99, pp. 365–377.10.1016/j.porgcoat.2016.06.012 ↗
42. Ricardo M. Souto, Yaiza González-Garcí, Javier Izquierdo, Sergio González: Corros. Sci. 2010; vol.52, pp. 748–753.10.1016/j.corsci.2009.10.035 ↗
43. X. Liu, P. Hou, X. Zhao, X. Ma, B. Hou: J. Coat. Technol. Res. 2019, vol.16, pp. 71–80.10.1007/s11998-018-0101-4 ↗
44. R.M. Souto, Y. González-Garcí, S. González: Prog. Org. Coat. 2009, vol. 65, pp. 435–439.10.1016/j.porgcoat.2009.03.008 ↗