journal article·2020-08

Effects of Zn on Microstructure Modification and Mechanical Properties Improvement of Al-Si-Cu-Mg Alloys

L.-K. Zhang, B.-R. Zhang

Publisher page

Abstract

In this research, the influence of Zn on the microstructure and mechanical properties of Al-Si-Cu-Mg alloys under different solidification rates was investigated. Differential scanning calorimetry was used to detect the nucleation and growth of eutectic Si, while scanning electron microscopy was used to analyze Fe-rich phases. Two growth models were deduced to explain the modification of the eutectic Si and Fe-rich phases upon the addition of Zn. The results show that an addition of 0.6 wt pct Zn modified the eutectic Si from flake like and fibrous to micron- and submicron-granular structures, depending on the different secondary dendrite arm spacings of ~ 33 μm and ~ 16 μm, respectively. For the Fe-rich phases under steel mold casting conditions, β-Al5FeSi was modified into π-Al8FeMg3Si6 upon adding 0.6 wt pct Zn. Under sand mold casting conditions, the 0.6 wt pct Zn addition only refined the size of the β-Al5FeSi. The Zn addition significantly improved the ultimate tensile strength and elongation. The excellent modification effect of Zn on the eutectic Si and Fe-rich phases was attributed to the fact that the reaction of the Zn-Si eutectic on the {111}Si planes forced the Si atoms from these phases into the eutectic droplets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. [1] B Guo, W Zhang: Materials Science and Engineering A, 2017, vol. 700, pp. 397–405.10.1016/j.msea.2017.05.111 ↗
2. [2] E. Sjölander, S. Seifeddine: Materials Science and Engineering A, 2011, vol.528, pp. 7402–09.10.1016/j.msea.2011.06.036 ↗
3. [3] Y. Han, A.M. Samuel: Materials and Design, 2014, vol. 58, pp. 426–38.10.1016/j.matdes.2014.01.060 ↗
4. [4] J Rao, J Zhang, R Liu: Materials Science and Engineering A, 2017, vol. 728, pp. 72–79.10.1016/j.msea.2018.05.010 ↗
5. [5] S Beroual, Z Boumerzoug: Journal of Alloys and Compounds, 2019, vol. 784, pp. 1026-35.10.1016/j.jallcom.2018.12.365 ↗
6. [6] J.H. LI, J. Barrirero: Metall. Mater. Trans. A, 2015, vol. 46, pp. 1300– 11.10.1007/s11661-014-2702-6 ↗
7. [7] M Zamani, S Seifeddine; International Journal of Metal casting, 2016, vol. 10, pp. 457–65.
8. [8] J.H. Li, X.D. Wang: Acta Materialia, 2015, vol. 84, pp. 153–63.10.1016/j.actamat.2014.10.064 ↗
9. [9] B Jiang, Z Ji: Materials Letters, 2019, vol. 239, pp. 13–16.10.1016/j.matlet.2018.12.045 ↗
10. [10] C Xu, F Wang: Journal of Materials Engineering and Performance, 2017, vol. 26, pp. 1605-13.10.1007/s11665-017-2599-5 ↗
11. W Liu, W Xiao: Mater. Sci. Eng. A, 2017, vol. 693, pp. 93–100.10.1016/j.msea.2017.03.097 ↗
12. T.H. Ludwig, E. Schonhovd Daehlen: J. Alloys Compd., 2014, vol. 586, pp. 180–90.10.1016/j.jallcom.2013.09.127 ↗
13. [13] Y Wu, G Zhang: Materials Science in Semiconductor Processing, 2011, vol. 14, pp. 302–05.10.1016/j.mssp.2011.02.008 ↗
14. [14] S.W. Park, T. Sugahara: Scripta Materialia, 2013, vol. 68, pp. 591–94.10.1016/j.scriptamat.2012.12.013 ↗
15. [15] C Li, C Sun: Journal of Alloys and Compounds, 2017, vol. 14, pp. 93-97.
16. [16] J Li, P Jia: J Mater Sci, 2014, vol. 25, pp. 1751–56.
17. [17] M. A. Moustafa, F. H. Samuel: Journal of Materials Science, 2003, vol. 38, pp. 4507–22.10.1023/A:1027333602276 ↗
18. [18] L. Lasa, J. M. Rodriguez-Ibabe: Journal of Materials Science, 2004, vol. 39, pp. 1343–55.10.1023/B:JMSC.0000013895.72084.c9 ↗
19. [19] L. F. Mondolfo, Aluminum Alloys: Structure and Properties. Butterworths, London, 1976. p. 644.
20. [20] J.H. Li, M. Zarif: Acta Materialia, 2014, vol. 72, pp. 80–98.10.1016/j.actamat.2014.03.030 ↗
21. [21] S.Z. Lu, A. Hellawell: Metall. Mater. Trans. A, 1987, vol.18A, pp. 1721–33.10.1007/BF02646204 ↗
22. [22] D.R. Hamilton, R.G. Seidensticker: Materials and Design, 2011, vol. 32, pp. 1542-47.10.1016/j.matdes.2010.09.035 ↗
23. [23] Lejček, P: Acta Materialia, 2019, vol. 170, pp.253–67.10.1016/j.actamat.2019.03.037 ↗
24. [24] KH Kim: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 4538–48.10.1007/s11661-014-2414-y ↗
25. [25] Shen Youde, Chen Renjie: Orientation and Doping Modulated Growth, 2016, vol.16, pp. 4158-65.
26. [26] V. Yu. Gershanov, S. I. Garmashov: Technical Physics, 2015, Vol.60, pp. 61-65.10.1134/S1063784215010107 ↗
27. [28] A. Kruglova, M. Engstler: Computational Materials Science, 2016, vol. 120, pp. 99–107.10.1016/j.commatsci.2016.04.019 ↗