Recrystallization and Grain Growth Simulations for Multiple-Pass Rolling and Annealing of U-10Mo
Source abstract
Abstract
A simulation model of recrystallization and grain growth has been developed to investigate grain structure evolution during deformation and heat treatment in polycrystalline U-10 wt pct Mo (U-10Mo) fuel. Experimentally obtained U-10Mo post-homogenization microstructures were used as input for closed-loop simulations of multiple rolling passes, intermediate heating, and final annealing. Finite element model calculations of deformation and Potts model simulations of recrystallization and grain growth were used to iteratively inform each subsequent stage of simulation. The model was then applied to predict the grain structure evolution during multiple-pass hot rolling and annealing of U-10Mo and benchmarked against experimentally observed U-10Mo recrystallization behavior. The results showed that our model was able to capture the coupling between deformation and recrystallization as a function of microstructure, including particle stimulated nucleation and recrystallization nucleation on grain boundaries. Additionally, we have achieved reasonable quantitative agreement with U-10Mo recrystallization and grain growth behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear Materials and Properties · Metallurgy and Material Forming · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. W.E. Frazier, S. Hu, N. Overman, C. Lavender, and V. V Joshi: J. Nucl. Mater., 2018, vol. 498, pp. 254–58.10.1016/j.jnucmat.2017.10.041 ↗
2. Z.G. Mei, L. Liang, Y.S. Kim, T. Wiencek, E. O’Hare, A.M. Yacout, G. Hofman, and M. Anitescu: J. Nucl. Mater., 2015, vol. 473, pp. 300–08.10.1016/j.jnucmat.2016.01.027 ↗
3. B. Beeler, Y. Zhang, and Y. Gao (2018) An Atomistic Study of Grain Boundaries and Surfaces in g U-Mo. Elsevier B.V, Amsterdam.
4. C. Wang, A. Soulami, Z. Xu, G. Cheng, S. Hu, D. Burkes, W.E. Frazier, K.S. Choi, X. Wang, X. Hu, C.A. Lavender, and V.V. Joshi: Process Modeling of U-10wt % Mo Alloys Using Integrated Computational Materials Engineering, PNNL-28640. Richland, WA: Pacific Northwest National Laboratory, 2019.10.2172/1518489 ↗
5. R. Prabhakaran, V. Joshi, M. Rhodes, A. Schemer-Kohrn, A. Guzman, and C. Lavender (2016) U-10Mo Sample Preparation and Examination Using Optical and Scanning Electron Microscopy. Pacific Northwest National Lab, Richland, WA.
6. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri (2012) NIH Image to ImageJ: 25 Years of Image Analysis. Nature Publishing Group, Berlin.
7. P.A. Manohar, M. Ferry, and T. Chandra (1998) Five decades of the zener equation. 38, 913-924.10.2355/isijinternational.38.913 ↗
8. G. Cheng, X. Hu, W.E. Frazier, C.A. Lavender, and V. V. Joshi (2018) Effect of Second Phase Particles and Stringers on Microstructures after Rolling and Recrystallization, Elsevier B.V., Oxford.10.1016/j.msea.2018.08.040 ↗
9. C.S. Smith: Trans. Am. Inst. Min. Eng., 1948, vol. 175, pp. 15–51.
10. X. Wang, Z. Xu, A. Soulami, X. Hu, C. Lavender, and V. Joshi: JOM, 2017, vol. 69, pp. 2532–37.10.1007/s11837-017-2608-z ↗
11. X. Hu, X. Wang, V. V. Joshi, and C.A. Lavender (2018) The Effect of Thermomechanical Processing on Second Phase Particle Redistribution in U-10 wt%Mo, vol. 500, Elsevier B.V, Amsterdam.
12. X.H. Hu, M. Jain, D.S. Wilkinson, and R.K. Mishra (2008) Microstructure-Based Finite Element Analysis of Strain Localization Behavior in AA5754 Aluminum Sheet. Acta Mater. 56, 3187-3201.10.1016/j.actamat.2008.02.048 ↗
13. Raabe: Acta Mater., 2000, vol. 48, pp. 1617–28.10.1016/S1359-6454(99)00451-6 ↗
14. D. Zöllner: Comput. Mater. Sci., 2014, vol. 86, pp. 99–107.10.1016/j.commatsci.2014.01.044 ↗
15. P.E. Goins and E.A. Holm (2016) The Material Point Monte Carlo Model: A Discrete, off-Lattice Method for Microstructural Evolution Simulations, vol. 124, Elsevier B.V., Amsterdam.
16. S.M. Foiles: Scr. Mater., 2010, vol. 62, pp. 231–34.10.1016/j.scriptamat.2009.11.003 ↗
17. W.E. Frazier, S. Hu, N. Overman, R. Prabhakaran, C. Lavender, and V. V Joshi: J. Nucl. Mater., 2019, vol. 513, pp. 56–61.10.1016/j.jnucmat.2018.10.046 ↗
18. G. Cheng, X. Hu, W.E. Frazier, C.A. Lavender, and V. V. Joshi: Mater. Sci. Eng. A, 2018, vol. 736, pp. 41–52.10.1016/j.msea.2018.08.040 ↗
19. Z. Xu, V. Joshi, S. Hu, D. Paxton, C. Lavender, and D. Burkes (2016) J. Nucl. Mater., 471, 154-164.10.1016/j.jnucmat.2015.11.026 ↗
20. V. V Joshi, E.A. Nyberg, C.A. Lavender, D. Paxton, and D.E. Burkes (2015) Thermomechanical Process Optimization of U-10wt % Mo Part 2 : The Effect of Homogenization on the Mechanical Properties and Microstructure, vol. 465, Elsevier B.V, Amsterdam.
21. S. Jana, L. Sweet, D. Neal, A. Schemer-kohrn, and C. Lavender: J. Nucl. Mater., 2018, vol. 509, pp. 318–29.10.1016/j.jnucmat.2018.06.024 ↗
22. K.F. Adam, Z. Long, and D.P. Field: Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy, vol. 48, Springer US, 2017.
23. R.L. Goetz (2005) Scr. Mater., 52, 851-856.10.1016/j.scriptamat.2005.01.012 ↗
24. K. Adam, J.M. Root, Z. Long, and D.P. Field: Modeling the Controlled Recrystallization of Particle-Containing Aluminum Alloys, vol. 26, Springer US, 2017.
25. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett (1997) Mater. Today. 238, 14-15.
26. F.J. Humphreys and M. Hatherly (2004) Recrystalization and Related Annealing Phenomena. Elsevier, Amsterdam.
27. M. Ferry and P.R. Munroe (2004) Compos. Part A, 35, 1017-1025.10.1016/j.compositesa.2004.03.014 ↗