journal article·2019-12

Synthesis and Fracture Characteristics of TiB2-TiAl Composites with a Unique Microlaminated Architecture

Xiping Cui, Yuanyuan Zhang, Yao Yao, Hao Ding, Lin Geng, Lujun Huang, Yuan Sun

Publisher page

Abstract

Microstructural evolution of as-rolled (TiB2/Al)-Ti laminates in the process of multistep heat treatments and microstructural characteristics of the resulting TiB2-TiAl composites were investigated in detail by scanning electron microscope (SEM) and transmission electron microscope. The desired TiB2-TiAl composites exhibited a unique microlaminated structure consisting of alternating fully lamellar α2-Ti3Al/γ-TiAl layers and TiB2-rich layers. Moreover, the formation mechanism of the microlaminated structure was elucidated. It is noteworthy that the TiB2-TiAl composites showed improved high-temperature tensile properties and room-temperature fracture toughness due to the strengthening effect of TiB2 particles and the structure effect of the unique microlaminated microstructure. In addition, the fracture behavior of the microlaminated TiB2-TiAl composites during the dynamic tensile was characterized by combining use of the three-dimensional X-ray microscope (3D-XRM) and SEM. The results indicated that pores and cracks preferred to initiate in the brittle TiB2-rich layer and showed a typical layered distribution, and then expanded into a nearby fully lamellar α2/γ layer and kept propagating through the entire α2/γ layer into another TiB2-rich layer, repeatedly, and finally the main crack propagated through all the fully lamellar α2/γ layers and TiB2-rich layers, eventually resulting in failure. Thus, the fracture mechanism of the innovative microlaminated TiB2-TiAl composites was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. D.M. Dimiduk (1999) Mater. Sci. Eng. A 263:281–88.10.1016/S0921-5093(98)01158-7 ↗
2. J.F. Silvain, J.C. Bihr, and Y. Lepetitcorps: Composites, Part A, 1996, vol. 27, pp. 691–95.10.1016/1359-835X(95)00076-E ↗
3. E.A. Loria: Intermetallics, 2000, vol. 8, pp. 1339–45.10.1016/S0966-9795(00)00073-X ↗
4. K.T. VenkateswaraRao, G.R. Odette, R.O. Ritchie (1994) Acta Metall. Mater. 42:893–911.10.1016/0956-7151(94)90285-2 ↗
5. T.W. Lee and C.H. Lee: J. Mater. Sci. Lett., 1999, vol. 18, pp. 801–03.10.1023/A:1006645302032 ↗
6. L.H. Dong, W.K. Zhang, J.A. Li, and Y.S. Yin: Adv. Mater. Res-Switz., 2009, vols. 79–82, pp. 477–80.10.4028/www.scientific.net/AMR.79-82.477 ↗
7. Y. Zhang, X.P. Wang, F.T. Kong, and Y.Y. Chen: Mater. Lett., 2018, vol. 214, pp. 182–85.10.1016/j.matlet.2017.12.002 ↗
8. S.C. Huang and E.L. Hall: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 2619–27.10.1007/BF02851355 ↗
9. D. Zhang, E. Arzt, and H. Clemens: Intermetallics, 1999, vol. 7, pp. 1081–87.10.1016/S0966-9795(99)00036-9 ↗
10. D.G. Konitzer, I.P. Jones, and H.L. Fraser: Scripta Metall., 1986, vol. 20, pp. 265–68.10.1016/0036-9748(86)90139-0 ↗
11. E. Schwaighofer, H. Clemens, J. Lindemann, A. Stark, and S. Mayer: Mater. Sci. Eng A, 2014, vol. 614, pp. 297–310.10.1016/j.msea.2014.07.040 ↗
12. X.Y. Yang, Y.L. Pan, Q.M. Wang, and Q.F. Wang: Mater. Res. Express, 2019, 6: 8652.10.1088/2053-1591/ab2273 ↗
13. P. Cavaliere, M. El Mehtedi, E. Evangelista, N. Kuzmenko, and O. Vasylyev: Composites, Part A, 2006, vol. 37, pp. 1514–20.10.1016/j.compositesa.2005.11.008 ↗
14. A. Jakob and M.O. Speidel: Mater. Sci. Eng. A, 1994, vol. 189, pp. 129–36.10.1016/0921-5093(94)90408-1 ↗
15. J.G. Luo and V.L. Acoff: Mater. Sci. Eng A, 2006, vol. 433, pp. 334–42.10.1016/j.msea.2006.06.120 ↗
16. J.L. Zhang: Intermetallics, 2010, vol. 18, pp. 2292–2300.10.1016/j.intermet.2010.07.020 ↗
17. D.V. Lazurenko, A. Stark, M.A. Esikov, J. Paul, I.A. Bataev, A.A. Kashimbetova, V.I. Mali, U. Lorenz, and F. Pyczak: Materials, 2019, vol. 12, pp. 629–49.10.3390/ma12040629 ↗
18. G.P. Chaudhari and V.L. Acoff: Intermetallics, 2010, vol. 18, pp. 472–78.10.1016/j.intermet.2009.09.008 ↗
19. M.A. Chaudhry, L. Ali, K.M. Ghauri, and J. Iqbal: Mater. Res. Express, 2019, vol. 6, art. no. 095032.10.1088/2053-1591/ab2bba ↗
20. J.C. Pang, G.H. Fan, X.P. Cui, A.B. Li, L. Geng, Z.Z. Zheng, and Q.W. Wang: Mater. Sci. Eng A, 2013, vol. 582, pp. 294–98.10.1016/j.msea.2013.06.026 ↗
21. M. Hadian, H. Shahrajabian, and M. Rafiei: Ceram. Int., 2019, vol. 45, pp. 12088–12092.10.1016/j.ceramint.2019.03.106 ↗
22. X.P. Cui, G.H. Fan, L. Geng, Y. Wang, L.J. Huang, and H.X. Peng: Mater. Sci. Eng. A, 2012, vol. 539, pp. 337–43.10.1016/j.msea.2012.01.107 ↗
23. T.T. Zhang, G.H. Fan, K.S. Miao, K. Chen, Z.H. Pan, S. Chen, X.P. Cui, M. Huang, and L. Geng: Mater. Sci. Eng. A, 2017, vol. 707, pp. 419–25.10.1016/j.msea.2017.09.074 ↗
24. X.P. Cui, G.H. Fan, L. Geng, Y. Wang, H.W. Zhang, and H.X. Peng: Scripta Mater., 2012, vol. 66, pp. 276–79.10.1016/j.scriptamat.2011.11.009 ↗
25. Y. Ding, D.O. Northwood, and A.T. Alpas: Surf. Coat. Technol., 1993, vol. 62, pp. 448–53.10.1016/0257-8972(93)90282-S ↗
26. R.G. Rowe, D.W. Skelly, M. Larsen, J. Heathcote, G.R. Odette, and G.E. Lucas: Scripta Metall. Mater., 1994, vol. 31, pp. 1487–92.10.1016/0956-716X(94)90061-2 ↗
27. X.P. Cui, G.H. Fan, L. Geng, H. Wu, J.C. Pang, and J.X. Gong: Mater. Sci. Eng. A, 2014, vol. 589, pp. 83–88.10.1016/j.msea.2013.09.070 ↗
28. X.P. Cui, L. Geng, K. Fang, G.H. Fan, Z.Z. Zheng, and G.S. Wang: Acta Metall. Sinica, 2013, vol. 49, pp. 1462–66.10.3724/SP.J.1037.2013.00546 ↗
29. R. Yang, Y.Y. Cui, L.M. Dong, and Q. Jia: J. Mater. Process. Technol., 2003, vol. 135, pp. 179–88.10.1016/S0924-0136(02)00873-7 ↗
30. T. Tetsui, K. Shindo, S. Kobayashi, and M. Takeyama: Intermetallics, 2003, vol. 11, pp. 299–306.10.1016/S0966-9795(02)00245-5 ↗
31. L.L. Meng, X.J. Wang, J.L. Ning, X.S. Hu, G.H. Fan, and K. Wu: Carbon, 2018, vol. 130, pp. 222–32.10.1016/j.carbon.2018.01.006 ↗
32. X.P. Cui, H. Ding, Y.Y. Zhang, Y. Yao, G.H. Fan, L.J. Huang, L. Geng, Z.Z. Zheng, and J.F. Chen: J. Alloys Compd., 2019, vol. 775, pp. 1057–67.10.1016/j.jallcom.2018.10.178 ↗
33. G. Wegmann, R. Gerling, and F.P. Schimansky: Acta Mater., 2003, vol. 51, pp. 741–52.10.1016/S1359-6454(02)00465-2 ↗
34. G.P. Chaudhari and V.L. Acoff: Intermetallics, 2010, vol. 18, pp. 472–78.10.1016/j.intermet.2009.09.008 ↗
35. X.P. Cui, G.H. Fan, L.J. Huang, J.X. Gong, H. Wu, T.T. Zhang, L. Geng, and S.H. Meng: Mater. Des., 2016, vol. 101, pp. 181–87.10.1016/j.matdes.2016.04.009 ↗
36. M.H. Yoo, J. Zou, and C.L. Fu: Mater. Sci. Eng. A, 1995, vols. 192–193, pp. 14–23.10.1016/0921-5093(94)03206-8 ↗
37. J.F. Zhu, W.W. Yang, and J.J. Wang: Adv. Mater. Res., 2011, vols. 211–212, pp. 205–08.10.4028/www.scientific.net/AMR.211-212.205 ↗
38. B. Zhu, X.Y. Xue, H.C. Kou, X.L. Li, and J.S. Li: Intermetallics, 2018, vol. 100, pp. 142–50.10.1016/j.intermet.2018.06.014 ↗