journal article·2019-12

Scandium Effect on Undercooling and Dendrite Morphology of Al-4.5 Wt Pct Cu Droplets

J. Valloton, A.-A. Bogno, H. Henein, D. M. Herlach, D. Sediako

Publisher page

Abstract

This paper reports on the undercooling and growth morphology of Al-4.5wt%Cu and Al-4.5wt%Cu-0.4wt%Sc with a focus on the effect of Sc addition. It is found that the addition of Sc reduces the undercoolings of both primary phase and eutectic. In addition, the morphology of the Al-4.5wt%Cu-0.4wt%Sc dendrites is less favored in the <111> direction at similar undercoolings as with Al-4.5wt%Cu. The development of Solidification Continuous Cooling Transformation diagrams that relate the solidification paths to the inherent solidification microstructures is also introduced. The Solidification Continuous Cooling Transformation diagrams are obtained, based on the measurement of phase fractions of a solidified microstructure. The quantitative data is combined with well-established solidification models and phase diagrams to yield undercooling temperatures of individual phases. The thermal history and undercooling of different phases in the solidified alloy are estimated for a wide range of cooling rates (from 10^-2 K/s to 10^4 K/s). It is found that a minimum cooling rate of about 1 K/s is required to avoid the nucleation of the detrimental intermetallic, W phase in hypo-eutectic Al-Cu-Sc.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. J.R. Davis (ed.): ASM Specialty Handbook: Aluminum and Aluminum Alloys, ASM International, Clevelandc 1993.
2. P. Haasen: Physical Metallurgy, 3rd ed., Cambridge University Press, Cambridge, UK, 1996.10.1017/CBO9781107295551 ↗
3. Z.C. Sims, O.R. Rios, D. Weiss, P.E.A Turchi, A. Perron, J.R.I. Lee, T.T. Li, J.A. Hammons, M. Bagge-Hansen, T.M. Willey, K. An, Y. Chen, A.H. King and S.K. McCall: Mater. Horiz., 2017, vol. 4 (6), pp. 1070-1078.10.1039/C7MH00391A ↗
4. N. Blake and M.A. Hopkins: J. Mater. Sci., 1985, vol. 20 (8), pp. 2861-2867.10.1007/BF00553049 ↗
5. D.N. Seidman, E.A. Marquis and D.C. Dunand: Acta Mater., 2002, vol. 50 (16), pp. 4021-4035.10.1016/S1359-6454(02)00201-X ↗
6. L.S. Toporova, D.G. Eskin, M.L. Kharakterova and T.V. Dobatkina: Advanced aluminum alloys containing scandium: structure and properties, Gordon & Breach, Amsterdam, 1998.
7. A.-A. Bogno, J. Valloton, H. Henein, D.G. Ivey, A.J. Locock, and M. Gallerneault: Can. Metall. Quart., 2018, vol. 57 (2), pp. 148-159.10.1080/00084433.2017.1403106 ↗
8. J. Røyset and N. Ryum: Int. Mater. Rev., 2005, vol. 50 (1), pp. 19-44.10.1179/174328005X14311 ↗
9. J. Røyset: Metall. Sci. Technol., 2007, vol. 25 (2), pp. 11-21.
10. M.L. Kharakterova and T.V. Dobatkina: Russ. Metal., 1988, vol. 6, pp. 175-178.
11. M.L. Kharakterova: Russ. Metal., 1991, vol. 4, pp. 191-194.
12. H. Bo, L.B. Liu and Z.P. Jin: J. Alloy. Compd., 2010, vol. 490 (1-2), pp. 318-325.10.1016/j.jallcom.2009.10.003 ↗
13. S. Riva, K.V. Yusenko, N.P. Lavery, D.J. Jarvis and S.G.R. Brown: Int. Mater. Rev., 2016, vol. 61 (3), pp. 203-228.10.1080/09506608.2015.1137692 ↗
14. J.O. Andersson, T. Helander, L. Höglund, S. Pingfang and B. Sundman: Calphad. 2002, vol. 26 (2), pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
15. A.-A. Bogno, J. Valloton, H. Henein, M. Gallerneault, and D.M. Herlach: Proc. 3rd Pan Am. Mater. Congress, Berlin, Springer, 2017, pp. 355–63.10.1007/978-3-319-52132-9_36 ↗
16. H. Henein: Mater. Sci. Eng., 2002, vol. A326, pp. 92-100.10.1016/S0921-5093(01)01429-0 ↗
17. J. Wiskel, H. Henein and E. Maire: Can. Metall. Quart., 2002, vol. 41 (1), pp. 97-110.10.1179/cmq.2002.41.1.97 ↗
18. J. Wiskel, K. Navel, H. Henein and E. Maire: Can. Metall. Quart., 2002, vol. 41 (2), pp. 193-204.10.1179/cmq.2002.41.2.193 ↗
19. A.-A. Bogno, P.D. Khatibi, H. Henein and Ch.-A. Gandin: Metall. Mater. Trans. A, 2016, vol. 47 (9), pp. 4606-4615.10.1007/s11661-016-3594-4 ↗
20. R. A. Young (ed.): The Rietveld Method. International Union of Crystallography/Oxford University Press, Oxford, UK, 1993.
21. D. M. Herlach and D. M. Matson (eds.) (2012) Solidification of Containerless Undercooled Melts. Wiley, Weinheim, pp. 9-16.
22. J. Chen, U. Dahlborg, C.M. Bao, M. Calvo-Dahlborg, and H. Henein: Metall. Mater. Trans. B, 2011, vol. 42 (3), pp. 557-567.10.1007/s11663-011-9485-6 ↗
23. M. Bedel, G. Reinhart, A.-A. Bogno, Ch.-A. Gandin, S. Jacomet, E. Boller, H. Nguyen-Thi and H. Henein: Acta Mater., 2015, vol. 89, pp. 234-246.10.1016/j.actamat.2015.02.007 ↗
24. D. Eskin, Q. Du, D. Ruvalcaba and L. Katgerman: Mater. Sci. Eng., 2005, 405(1-2), 1-10.10.1016/j.msea.2005.05.105 ↗
25. A.M. Mullis, L. Farrell, R.F. Cochrane and N.J. Adkins: Metall. Mater. Trans. B, 2013, vol. 44 (4), pp. 992-999.10.1007/s11663-013-9856-2 ↗
26. J. A. Dantzig and M. Rappaz: Solidification, EPFL Press, Lausanne, 2009.10.1201/9781439808030 ↗