journal article·2019-11

An Investigation of Tertiary γ′ Precipitation in a Powder-Metallurgy, γ-γ′ Nickel-Base Superalloy

S. L. Semiatin, N. C. Levkulich, J. S. Tiley

Publisher page

Abstract

The kinetics of precipitation of tertiary γ′ during continuous cooling of a powder-metallurgy, nickel-base superalloy were established via a series of laboratory-scale heat treatments and fast-acting numerical simulations. Using induction- and direct-resistance-heating methods, cylindrical rods of the superalloy LSHR were supersolvus solution treated, cooled at a constant rate, and quenched at various intermediate temperatures in the tertiary-γ′-precipitation range. Additionally, small cubes were solutioned in an indirect-resistance furnace followed by either free-convection (air) cooling, oil quenching, or water quenching. The microstructures so developed were determined via scanning electron microscopy and selected transmission electron microscopy. These observations revealed a non-linear dependence of the logarithm of the average size on the logarithm of the cooling rate as well as a spatial variation of precipitate size. Coarser and finer tertiary precipitates were located respectively far from or near to the interfaces between secondary γ′ precipitates and matrix γ. The experimental findings were interpreted in the context of two different models, both assuming homogeneous nucleation and growth of precipitates. These models were based on either (1) a conventional “mean-field” approach in which concentration gradients within the gamma matrix developed during growth of secondary γ′ are neglected or (2) a novel “local-field” model in which matrix concentration gradients developed during secondary growth prior to nucleation of tertiary γ′ are taken into account in an approximate fashion. The latter model demonstrated that the source of the spatial variation in tertiary γ′ was related to variations in local supersaturation and thus the local temperature at which nucleation occurs during cooling. Average sizes and size variations predicted by the “local-field” model provided semi-quantitative agreement with experimental measurements.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M.J. Donachie, ed.: Superalloys: Source Book, ASM International, Materials Park, OH, 1984.
2. T.A. Parthasarathy, S.I. Rao, and D.M. Dimiduk (2004) Superalloys 2004. In: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds, Superalloys 2004, TMS, Warrendale, pp. 887-89610.7449/2004/Superalloys_2004_887_896 ↗
3. 3.R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1588-1603.10.1007/s11661-009-9858-5 ↗
4. 4.D.M. Collins and H.J. Stone: Int. J. Plasticity, 2014, vol. 54, pp. 96-112.10.1016/j.ijplas.2013.08.009 ↗
5. S.T. Wlodek, M. Kelly, and D.A. Alden (1996) Superalloys. In: R. D. Kissinger, D. J. Deye, D. L. Anton, A. D. Cetel, M. V. Nathal, T. M. Pollock, and D. A. Woodford, eds., Superalloys 1996, TMS, Warrendale, pp. 129-136.
6. 6.S.S. Babu, M.K. Miller, J.M. Vitek, and S.A. David: Acta Mater., 2001, vol. 49, pp. 4149-4160.10.1016/S1359-6454(01)00314-7 ↗
7. 7.J. Mao, K.M. Chang, W. Yang, D.U. Furrer, K. Ray, and S. Vaze: Mater. Sci. Eng. A, 2002, vol. A332, pp. 318-329.10.1016/S0921-5093(01)01758-0 ↗
8. R.J. Mitchell, M.C. Hardy, M. Preuss, and S. Tin (2004) Superalloys 2004. In: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds, Superalloys 2004, TMS, Warrendale, pp. 361-37010.7449/2004/Superalloys_2004_361_370 ↗
9. 9.A.R.P. Singh, S. Nag, J.Y. Hwang, G.B. Viswanathan, J.S. Tiley, R. Srinivasan, H.L. Fraser, and R. Banerjee: Mater. Characterization, 2011, vol. 62, pp. 878-886.10.1016/j.matchar.2011.06.002 ↗
10. 10.A.R.P. Singh, S. Nag, S. Chattopadhyay, R. Ren, J.S. Tiley, G.B. Viswanathan, H.L. Fraser, and R. Banerjee:Acta Mater., 2013, vol. 61, pp. 280-293.10.1016/j.actamat.2012.09.058 ↗
11. 11.S.L. Semiatin, S-L. Kim, F. Zhang, and J.S. Tiley: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1715-1730.10.1007/s11661-015-2748-0 ↗
12. P.M. Sarosi, B. Wang, J.P. Simmons, Y. Wang, and M.J. Mills: Scr. Mater., 2007, vol 62, pp. 767-770.10.1016/j.scriptamat.2007.06.014 ↗
13. 13.H.S. Liu, L. Zhang, X.B. He, X.H. Qu, Z. Li, and G.Q. Zhang: Rare Metals, 2013, vol. 32, pp. 560-563.10.1007/s12598-013-0072-7 ↗
14. T.P. Gabb, D.G. Backman, D.Y. Wei, D.P. Mourer, D.U. Furrer, A. Garg, and D.L. Ellis (2000) Superalloys 2000. In: T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., Superalloys 2000, TMS, Warrandale, pp. 405-414.10.7449/2000/Superalloys_2000_405_414 ↗
15. H.J. Jou, P.W. Voorhees, and G.B. Olson (2004) Superalloys 2004. In: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds, Superalloys 2004, TMS, Warrendale, pp. 877-886.10.7449/2004/Superalloys_2004_877_886 ↗
16. G.B. Olson, H.J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci, and D. Hull (2008) Superalloys 2008. In: R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., Superalloys 2008, TMS, Warrandale, pp. 923-932.
17. K. Wu, F. Zhang, S. Chen, W. Cao, and Y.A. Chang (2008) Superalloys 2008. In: R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., Superalloys 2008, TMS, Warrandale, pp. 933-939.
18. 18.B. Wang, F. Zhang, W. Cao, S. Chen, and S. Kou: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 115-122.10.1007/s11661-014-2617-2 ↗
19. F. Zhang, W. Cao, C. Zhang, S. Chen, J. Zhu, and D. Lv: Proc., 9th Int. Symposium on Superalloy 718 & Derivat.: Energy, Aerospace, Ind. Appl., E. Ott, ed., TMS, Pittsburgh, 2018, pp. 147–61.10.1007/978-3-319-89480-5_8 ↗
20. J.P. Simmons, C. Shen, and Y. Wang: Scripta Mater., 2000, vol 43, pp. 935-942.10.1016/S1359-6462(00)00517-0 ↗
21. 21.Y.H. Wen, J.P. Simmons, C. Shen, C. Woodward, and Y. Wang: Acta Mater., 2003, vol. 51, pp. 1123-1132.10.1016/S1359-6454(02)00516-5 ↗
22. 22.J.P. Simmons, Y. Wen, C. Shen, and Y. Wang: Mater. Sci. Eng. A, 2004, vol. A365, pp. 136-143.10.1016/j.msea.2003.09.019 ↗
23. B. Wang: Ph.D. Dissertation, Ohio State University, Columbus, 2008. https://etd.ohiolink.edu/!etd.send_file?accession=osu1228147112&disposition=inline
24. R.D. Doherty: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., North-Holland, Amsterdam, 1996, chap. 15.
25. 25.S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, O.N. Senkov, and J.S. Tiley: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 6265- 6276.10.1007/s11661-018-4896-5 ↗
26. J. Gayda, T.P. Gabb, and P.T. Kantzos (2004) Superalloys 2004. In: K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds. Superalloys 2004, TMS, Warrendale, pp. 323-330.10.7449/2004/Superalloys_2004_323_329 ↗
27. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005. http://gltrs.grc.nasa.gov
28. T.P. Gabb, J. Gayda, D.F. Johnson, R.A. MacKay, R.B. Rogers, C.K. Sudbrack, A. Garg, I.E. Locci, S.L. Semiatin, and E. Kang: Report NASA/TM-2016-218936, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, 2016.
29. 29.S.L. Semiatin, F. Zhang, J.S. Tiley, and D.U. Furrer: Mater. at High Temp., 2016, vol. 33, pp. 301-309.10.1080/09603409.2016.1165449 ↗
30. 30.S. Q. Xiao and P. Haasen: Acta Metall Mater., 1991, vol. 39, pp. 651-659.10.1016/0956-7151(91)90133-L ↗
31. 31.H. I. Aaronson and F. K. LeGoues: Metall. Trans. A, 1992, vol. 23, pp. 1915-1945.10.1007/BF02647541 ↗
32. 32.H. S. Carslaw and J. C. Jaeger: Conduction of Heat in Solids, Oxford University Press, London, 1959.
33. 33.H. B. Aaron, D. Fainstein, and G. R. Kotler: J. Appl. Phys., 1970, vol. 41, pp. 4404-4410.10.1063/1.1658474 ↗
34. 34.M. Perez: Scripta Mater., 2005, vol. 52, pp. 709-712.10.1016/j.scriptamat.2004.12.026 ↗
35. 35.O. Grong and H. R. Shercliff: Prog. Mat. Sci., 2002, vol. 47, pp. 163-282.10.1016/S0079-6425(00)00004-9 ↗
36. C.K. Sudbrack, L.J. Evans, A. Garg, D.E. Perea, and D.K. Schreiber (2016) Superalloys 2106. In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, and S.Tin, eds, Superalloys 2106, TMS, Warrendale, pp. 927-936.
37. 37.Y.Q. Chen, E. Francis, J. Robson, M. Preuss, and S.J. Haigh: Acta Mater., 2015, vol. 85, pp. 199-206.10.1016/j.actamat.2014.11.009 ↗
38. 38.S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, and D.U. Furrer: IMMI, 2016, vol. 5, no. 3, pp. 1-20.
39. T.P. Gabb,, A. Garg, D.R. Miller, C.K. Sudbrack D.R. Hull, D.F. Johnson, R.B. Rogers, J. Gayda, and S.L. Semiatin: Report NASA/TM-2012-217604, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, 2012.