journal article·2019-08-15

Synthesis, Characterization, and Mechanical Properties Evaluation of Mg-Ti3AlC2 Composites Produced by Powder Metallurgy/Hot Pressing

L. Rangaraj, R. V. Sagar, M. Stalin, K. Raghavendra, K. Venkateswarlu

Publisher page

Abstract

Magnesium (Mg)-titanium aluminum carbide (Ti3AlC2) composites were produced by hot pressing (HP) at 0.15 to 1 MPa, 923 K (650 °C) for 30 minutes; Mg-Ti3AlC2 (10 to 30 vol pct) composite produced at 0.15 MPa, 923 K (650 °C) for 30 minutes exhibited 95 to 99 pct relative density (RD), while Mg-40Ti3AlC2 produced at 1 MPa, 923 K (650 °C) for 30 minutes exhibited full density. Improved densification results are mainly due to the flow of liquid Mg between the Ti3AlC2 particles. The monolithic Mg processed at 5 MPa, 873 K (600 °C) for 5 minutes also exhibited full density. Further, Mg-Ti3AlC2 composites produced at low pressure (1 MPa) exhibited maximum density as compared to other research works. Monolithic Mg exhibited a microhardness of 62 ± 8 HV0.5. Besides, as the Ti3AlC2 content was varied from 10 to 40 vol pct, the microhardness of Mg-Ti3AlC2 composites increased from 62 ± 5 to 158 ± 11 HV0.5. The compressive strength of Mg-Ti3AlC2 (10 to 40 vol pct) composite at room temperature (RT) was in the range of 180 ± 10 to 617 ± 13 MPa. The compressive strengths of Mg-Ti3AlC2 (30 and 40 vol pct) composites at 473 K (200 °C) were 366 ± 20 and 480 ± 71 MPa, respectively. The flexural strength of Mg-Ti3AlC2 composites (20 to 40 vol pct) was determined to be in the range of 335 ± 12 to 513 ± 3 MPa.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Aluminum Alloys Composites Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 1.H.Z. Ye and Y.L. Xing: J. Mater. Sci., 2004, vol. 39, pp. 6153–71.10.1023/B:JMSC.0000043583.47148.31 ↗
2. 2.A. Luo, J. Renaud, I. Nakatsugawa, and J. Plourde: JOM, 1995, vol. 47 (7), pp. 28–31.10.1007/BF03221226 ↗
3. B.B. Clow: Adv Mater Processes 1996, 150(4):33–34.
4. 4.B.J. Lazan: Damping of Materials and Members in Structural Mechanics, Pergamon Press, Oxford, United Kingdom, 1968.
5. 5.M. Kouzeli and D.C. Dunand: Acta Mater., 2003, vol. 51, pp. 6105–21.10.1016/S1359-6454(03)00431-2 ↗
6. 6.T.S. Srivatsan, I.A. Ibrahim, F.A. Mohamed, and E.J. Lavernia: J. Mater. Sci., 1991, vol. 26, pp. 5965–78.10.1007/BF01113872 ↗
7. 7.B.W. Chua, L. Lu, and M.O. Lai: Compos. Struct., 1999, vol. 47 (1–4), pp. 595–601.10.1016/S0263-8223(00)00031-3 ↗
8. 8.L. Li, M.O. Lai, M. Gupta, B.W. Chua, and A. Osman: J. Mater. Sci., 2000, vol. 35, pp. 5553–61.10.1023/A:1004892610575 ↗
9. 9.A. Luo: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2445–55.10.1007/BF02671259 ↗
10. 10.C. Badini, F. Marino, M. Montorsi, and X.B. Guo: Mater. Sci. Eng. A–Struct. Mater.: Prop. Microstr. Process, 1992, vol. A157, pp. 53–61.10.1016/0921-5093(92)90098-L ↗
11. 11.K.K. Deng, K. Wu, Y.W. Wu, K.B. Nie, and M.Y. Zheng: J. Alloys Compd., 2010, vol. 504, pp. 542–47.10.1016/j.jallcom.2010.05.159 ↗
12. 12.J. Lan, Y. Yang, and X. Li: Mater. Sci. Eng., 2004, vol. A386, pp. 284–90.10.1016/S0921-5093(04)00936-0 ↗
13. 13.X.J. Wang, N.Z. Wang, L.Y. Wang, X.S. Hu, K. Wu, Y.Q. Wang, and Y.D. Huang: Mater. Des., 2014, vol. 57, pp. 638–45.10.1016/j.matdes.2014.01.022 ↗
14. 14.L.Y. Chen, J.Q. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J.M. Yang, S. Mathaudhu, and X.C. Li: Nature, 2015, vol. 528, pp. 539–43.10.1038/nature16445 ↗
15. 15.A. Contreras, V.H. Lopez, and E. Bedolla: Scripta Mater., 2004, vol. 51, pp. 249–53.10.1016/j.scriptamat.2004.04.007 ↗
16. 16.Y. Yao and L. Chen: J. Mater. Sci. Technol., 2014, vol. 30, pp. 661–65.10.1016/j.jmst.2014.06.005 ↗
17. 17.M. Habibnejad-Korayem, R. Mahmudi, and W.J. Poole: Mater. Sci. Eng., 2009, vol. A519, pp. 198–203.10.1016/j.msea.2009.05.001 ↗
18. M.W. Barsoum and M. Radovic: in Annual Review of Materials Research, D.R. Clarke and P. Fratzl, eds., 2011, vol. 41, pp. 195–227. https://doi.org/10.1146/annurev-matsci-062910-10044810.1146/annurev-matsci-062910-100448 ↗
19. 19.M. Radovic and M.W. Barsoum: Am. Ceram. Soc. Bull., 2013, vol. 92 (3), pp. 20–27.
20. 20.M.W. Barsoum, T. Zhen, S.R. Kalidindi, M. Radovic, and A. Murugaiah: Nat. Mater., 2003, vol. 2 (2), pp. 107–11.10.1038/nmat814 ↗
21. 21.X.H. Wang and Y.C. Zhou: J. Mater. Chem., 2002, vol. 12, pp. 455–60.10.1039/b108685e ↗
22. 22.X.H. Wang and Y.C. Zhou: Acta Mater., 2002, vol. 50, pp. 3143–51.10.1016/S1359-6454(02)00117-9 ↗
23. 23.Y. Zhang, Z.M. Sun, and Y.C. Zhou: Mater. Res. Innov., 1999, vol. 3, pp. 80–84.10.1007/s100190050129 ↗
24. 24.L. Peng: Scripta Mater., 2007, vol. 56, pp. 729–32.10.1016/j.scriptamat.2007.01.027 ↗
25. 25.W.J. Wang, V. Gauthier-Brunet, G.P. Bei, G. Laplanche, J. Bonneville, A. Joulain, and S. Dubois: Mater. Sci. Eng. A, 2011, vol. 530, pp. 168–73.10.1016/j.msea.2011.09.068 ↗
26. 26.J. Zhang and Y.C. Zhou: J. Mater. Res., 2008, vol. 23 (4), pp. 924–32.10.1557/jmr.2008.0126 ↗
27. 27.W.J. Wang, V. Gauthier-Brunet, G.P. Bei, G. Laplanche, J. Bonneville, A. Joulain, and S. Dubois: Mater. Sci. Eng., 2011, vol. A530, pp. 168–7310.1016/j.msea.2011.09.068 ↗
28. 28.D.A.H. Hanaor, L. Hu, W.H. Kan, G. Proust, M. Foley, I. Karaman, and M. Radovic: Mater. Sci. Eng., 2016, vol. A672, pp. 247–56.10.1016/j.msea.2016.06.073 ↗
29. 29.X. Huang, Y. Feng, G. Qian, H. Zhao, J. Zhang, and X. Zhang: Mater. Sci. Technol., 2018, vol. 34, pp. 757–62.10.1080/02670836.2017.1407900 ↗
30. 30.S. Gupta and M.W. Barsoum: Wear, 2011, vol. 271, pp. 1878–94.10.1016/j.wear.2011.01.043 ↗
31. 31.L. Hu, A. Kothalkar, I. Karaman, G. Proust, and M. Radovic: J. Alloys Compd., 2014, vol. 610, pp. 635–44.10.1016/j.jallcom.2014.04.224 ↗
32. 32.A. Kothalkar, R. Benitez, L. Hu, M. Radovic, and I. Karaman: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2646–58.10.1007/s11661-014-2193-5 ↗
33. 33.S. Amini, C.Y. Ni, and M.W. Barsoum: Compos. Sci. Technol., 2009, vol. 69, pp. 414–20.10.1016/j.compscitech.2008.11.007 ↗
34. 34.S. Amini and M.W. Barsoum: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3707–18.10.1016/j.msea.2010.01.073 ↗
35. 35.A. Kontsos, T. Loutas, V. Kostopoulos, K. Hazeli, B. Anasori, and M.W. Barsoum: Acta Mater., 2011, vol. 59, pp. 5716–27.10.1016/j.actamat.2011.05.048 ↗
36. L. Hu, M. O’Neil, V. Erturun, R. Benitez, G. Proust, I. Karaman, and M. Radovic: Scient. Rep., 2016, 6:35523. https://doi.org/10.1038/srep3552310.1038/srep35523 ↗
37. 37.A. Kumar, K.S. Tun, A.D. Kohadkar, and M. Gupta: Metals, 2017, vol. 7, p. 104.10.3390/met7030104 ↗
38. 39.M. Nelson, M.T. Agne, B. Anasori, J. Yang, M.W. Barsoum: Mater. Sci. Eng., 2017, vol. A705, pp. 182–88.10.1016/j.msea.2017.08.068 ↗
39. 38.N.V. Tzenov and M.W. Barsoum: J. Am. Ceram. Soc., 2000, vol. 83 (6), pp. 825-32.10.1111/j.1151-2916.2000.tb01281.x ↗