Effect of Heat Treatment Combined with an Alternating Magnetic Field on Microstructure and Mechanical Properties of a Ni-Based Superalloy
Source abstract
Abstract
The effect of a two-step heat treatment including solution and aging heat treatments in an alternating magnetic field (AMF) on microstructure and mechanical properties of the Ni-based superalloy DZ483 was investigated. In the solution heat treatment, the AMF significantly reduced the chemical segregation. In the aging heat treatment, the application of the AMF was found to not only modify the partition ratios of some elements like Al and Ti between the γ′ precipitate and the γ matrix, but also to distinctly accelerate coarsening of γ′ precipitates and to result in a larger mean particle size. Additionally, the morphology of γ′ precipitates gradually evolved from a quasi cube without an AMF to a regular cubic shape in the AMF. Mechanical performance tests showed that hardness and tensile strength of the samples heat treated in the AMF were increased in comparison with those without an AMF. It is shown that the enhanced diffusivity in the AMF is mainly responsible for the change in microsegregation, particle size, and morphology evolution. Furthermore, the AMF promotes the solid solution strengthening and the order strengthening, both of which contribute to the improvement of mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. X. Huang, M.C. Chaturvedi and N.L. Richards, Metall. Mater. Trans. A, 1996, vol. 27, pp. 785-790.10.1007/BF02648966 ↗
2. G. E. Fuchs, Mater. Sci. Eng. A, 2001, vol. 300, pp. 52-60.10.1016/S0921-5093(00)01776-7 ↗
3. J. J. Jackson, M. J. Donachie, M. Gell and R. J. Henricks, Metall. Trans. A, 1977, vol. 8, pp. 1615-1620.10.1007/BF02644867 ↗
4. P. Caron and T. Khan, Mater. Sci. Eng., 1983, vol. 61, pp. 173-184.10.1016/0025-5416(83)90199-4 ↗
5. G.E. Fuchs, J. Mater. Eng. Perform., 2002, vol. 11, pp. 19-25.10.1007/s11665-002-0003-5 ↗
6. H. Pang, N. D’Souza, H. Dong, H. Stone and C. Rae, Metall. Mater. Trans. A 2016, vol. 47, pp. 889-906.10.1007/s11661-015-3252-2 ↗
7. K.R. Bain, M.L. Gambone, J.M. Hyzak and M.C. Thomas, Superalloys 1988 1988, pp. 13-22.
8. B. C. Wilson, J. A. Hickman and G. E. Fuchs, JOM, 2003, vol. 55, pp. 35-40.10.1007/s11837-003-0158-z ↗
9. M. V. Nathal, Metall. Trans. A, 1987, vol. 18, pp. 1961-1970.10.1007/BF02647026 ↗
10. J. Andersson, G. P. Sjöberg, L. Viskari and M. Chaturvedi, Mater. Sci. Technol., 2013, vol. 29, pp. 43-53..10.1179/1743284712Y.0000000108 ↗
11. D.U. Furrer, R. Shankar and C White, JOM, 2003, vol. 55, pp. 32-34.10.1007/s11837-003-0157-0 ↗
12. H. Pang, L. Zhang, R. Hobbs, H. Stone and C. Rae, Metall. Mater. Trans. A 2012, vol. 43, pp. 3264-3282.10.1007/s11661-012-1146-0 ↗
13. B. Zhang, J. Cui and G. Lu, Mater. Sci. Eng. A, 2003, vol. 355, pp. 325-330.10.1016/S0921-5093(03)00105-9 ↗
14. C. Stelian, Y. Delannoy, Y. Fautrelle and T. Duffar, J. Cryst. Growth, 2004, vol. 266, pp. 207-215.10.1016/j.jcrysgro.2004.02.047 ↗
15. G.M. Poole, M. Heyen, L. Nastac and N. El-Kaddah, Metall. Mater. Trans. B, 2014, vol. 45, pp. 1834-1841.10.1007/s11663-014-0090-3 ↗
16. B. D. Cullity and C. W. Allen, Acta Metall., 1965, vol. 13, pp. 933-935.10.1016/0001-6160(65)90090-8 ↗
17. X. Liu, J. Cui, X. Wu, Y. Guo and J. Zhang, Scripta Mater., 2005, vol. 52, pp. 79-82.10.1016/j.scriptamat.2004.05.025 ↗
18. X. Hu, L. Peng, S. Qian, P. Fu, W. Ding, Mater. Lett., 2014, vol. 123, pp. 238-241.10.1016/j.matlet.2014.02.104 ↗
19. X. Liu, J. Cui, E. Wang, and J. He: Mater. Sci. Eng. A, 2005, vol. 402, pp. 1–4.
20. Y. Z. Liu, L. H. Zhan, Q. Q. Ma, Z. Y. Ma and M. H. Huang, J. Alloys Compd., 2015, vol. 647, pp. 644-647.10.1016/j.jallcom.2015.05.183 ↗
21. C. Li, G. Guo, Z. Yuan, W. Xuan, X. Li, Y. Zhong and Z. Ren, J. Alloys Compd. 2017, vol. 720, pp. 272-276.10.1016/j.jallcom.2017.05.253 ↗
22. M. Flemings, D. Poirier, R. Barone, H. Brody, J. Iron Steel Inst. 1970, vol. 208, pp. 371-381.
23. M.N. Gungor, Metall. Trans. A, 1989, vol. 20, pp. 2529-2533.10.1007/BF02666687 ↗
24. M. Ganesan, D. Dye, P. Lee, Metall. Mater. Trans. A, 2005, vol. 36, pp. 2191-2204.10.1007/s11661-005-0338-2 ↗
25. M. Seyring, X. Song, M. Rettenmayr, ACS Nano, 2011, vol. 5, pp. 2580-2586.10.1021/nn1023126 ↗
26. R. Völkl, U. Glatzel and M. Feller-Kniepmeier, Acta Mater., 1998, vol. 46, pp. 4395-4404.10.1016/S1359-6454(98)00085-8 ↗
27. A. G. Khachaturyan, S. V. Semenovskaya and J. W. Morris, Acta Metall., 1988, vol. 36, pp. 1563-1572.10.1016/0001-6160(88)90224-6 ↗
28. T. Miyazaki and M. Doi, Mater. Sci. Eng. A, 1989, vol. 110, pp. 175-185.10.1016/0921-5093(89)90168-8 ↗
29. A.A. Hopgood and J.W. Martin, Mater. Sci. Technol., 1986, vol. 2, pp. 543-546.10.1179/mst.1986.2.6.543 ↗
30. J. Lapin, M. Gebura, T. Pelachová and M. Nazmy, Kovove Mater., 2008, vol. 46, pp. 313-322.
31. N. Warnken, D. Ma, A. Drevermann, R. C. Reed, S. G. Fries and I. Steinbach, Acta Mater. 2009, vol. 57, pp. 5862-5875.10.1016/j.actamat.2009.08.013 ↗
32. R. Schmidt and M. Feller-Kniepmeier, Scripta Metall. 1992, vol. 26, pp. 1919-1924.10.1016/0956-716X(92)90059-N ↗
33. F. Pyczak, B. Devrient and H. Mughrabi, Superalloys 2004, 2004, pp. 827-836.10.7449/2004/Superalloys_2004_827_836 ↗
34. Y. Mishima, S. Ochiai and T. Suzuki, Acta Metall., 1985, vol. 33, pp. 1161-1169.10.1016/0001-6160(85)90211-1 ↗
35. J.K. Tien and R.P. Gamble, Metall. Trans., 1972, vol. 3, pp. 2157-2162.10.1007/BF02643227 ↗
36. T. Murakumo, T. Kobayashi, Y. Koizumi and H. Harada, Acta Mater., 2004, vol. 52, pp. 3737-3744.10.1016/j.actamat.2004.04.028 ↗
37. R.C. Reed, D.C. Cox and C. Rae, Mater. Sci. Technol. 2007, vol. 23, pp. 893-902.10.1179/174328407X192723 ↗
38. I. M. Lifshitz and V. V. Slyozov, J. Phys. Chem. Solids 1961, vol. 19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
39. C. Wagner, Z. Elektrochem, 1961, vol. 65, pp. 581-591.
40. Y. Zhang, N. Gey, C. He, X. Zhao, L. Zuo, C. Esling, Acta Mater., 2004, vol. 52, pp. 3467-3474.10.1016/j.actamat.2004.03.044 ↗
41. G. Urbain and E. Übelacker, Adv. Phys., 1967, vol. 16, pp. 429-438.10.1080/00018736700101535 ↗
42. F. R. de Boer, C. J. Schinkel, J. Biesterbos and S. Proost, J. Appl. Phys., 1969, vol. 40, pp. 1049-1055.10.1063/1.1657528 ↗
43. A. J. Ardell and V. Ozolins, Nat. Mater., 2005, vol. 4, pp. 309-316.10.1038/nmat1340 ↗
44. A. J. Ardell, Interface Sci., 1995, vol. 3, pp. 119-125.10.1007/BF00207013 ↗
45. C. Li, S. He, Y. Fan, H. Engelhardt, S. Jia, W. Xuan, X. Li, Y. Zhong, Z. Ren, Appl. Phys. Lett., 2017, vol. 110, pp. 074102.10.1063/1.4976528 ↗
46. C. Li, S. He, H. Engelhardt, T. Zhan, W. Xuan, X. Li, Y. Zhong, Z. Ren and M. Rettenmayr, Sci. Rep. 2017, vol. 7, pp. 18085.10.1038/s41598-017-18500-w ↗
47. M. Karunaratne, D.C. Cox, P.Carter and R.C. Reed, Superalloys 2000, 2000, pp. 263-272.
48. J. Tiley, G.B. Viswanathan, R. Srinivasan, R. Banerjee, D.M. Dimiduk and H.L. Fraser, Acta Mater., 2009, vol. 57, pp. 2538-2549.10.1016/j.actamat.2009.02.010 ↗
49. J. Lapin, M. Gebura, O. Bajana, T. Pelachová and M. Nazmy, Kovove Mater., 2009, vol. 47, pp. 129-138.
50. A.J. Ardell, Metall. Mater. Trans. B, 1970, vol. 1, pp. 525-534.10.1007/BF02811564 ↗
51. T. Miyazaki, H. Imamura, H. Mori and T. Kozakal, J. Mater. Sci., 1981, vol. 16, pp. 1197-1203.10.1007/BF01033832 ↗
52. R.A. Ricks, A.J. Porter and R.C. Ecob, Acta Metall., 1983, vol. 31, pp. 43-53.10.1016/0001-6160(83)90062-7 ↗
53. M.F. Henry, Y.S. Yoo, D.Y. Yoon and J. Choi, Metall. Trans. A, 1993, vol. 24, pp. 1733-1743.10.1007/BF02657848 ↗
54. Mats Hillert: Phase equilibria, phase diagrams and phase transformations: their thermodynamic basis, Cambridge University Press, Cambridge, 2007.10.1017/CBO9780511812781 ↗
55. J.H. Westbrook, Z. Kristallogr., 1958, vol. 110, pp. 21.10.1524/zkri.1958.110.1-6.21 ↗
56. T. Miyazaki, H. Imamura and T. Kozakai, Mater. Sci. Eng., 1982, vol. 54, pp. 9-15.10.1016/0025-5416(82)90024-6 ↗
57. A. Hazotte, T. Grosdidier and S. Denis, Scripta Mater. 1996, vol. 34, pp. 601-608.10.1016/1359-6462(95)00554-4 ↗
58. M. Feller-Kniepmeier, T. Link, I. Poschmann, G. Scheunemann-Frerker and C. Schulze, Acta Mater., 1996, vol. 44, pp. 2397-2407.10.1016/1359-6454(95)00354-1 ↗
59. C.T. Sims, N.S. Stoloff, W.C. Hagel: Superalloys II, John Wiley & Sons, New York, 1987.
60. E. Fleischmann, M.K. Miller, E. Affeldt and U. Glatzel, Acta Mater. 2015, vol. 87, pp. 350-356.10.1016/j.actamat.2014.12.011 ↗
61. A.J. Ardell, Metall. Trans. A, 1985, vol. 16, pp. 2131-2165.10.1007/BF02670416 ↗
62. R. C. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
63. B. Reppich, Acta Metall. 1982, vol. 30, pp. 87-94.10.1016/0001-6160(82)90048-7 ↗
64. R. O. Scattergood and D.J. Bacon, Philos. Mag., 1975, vol. 31, pp. 179-198.10.1080/14786437508229295 ↗
65. P. Beauchamp, J. Douin and P.Veyssiere, Philos. Mag. A, 1987, vol. 55, pp. 565-581.10.1080/01418618708214369 ↗
66. S.M. Copley and B.H. Kear, Trans. TMS-AIME 1967, vol. 239, pp. 984-992.
67. H. O’Neill: Hardness measurement of metals and alloys, Chapman & Hall, London, 1967.
68. W. W. Milligan and S. D. Antolovich, Metall. Trans. A 1987, vol. 18, pp. 85-95.10.1007/BF02646225 ↗
69. A. Sengupta, S. K. Putatunda, L. Bartosiewicz, J. Hangas, P. J. Nailos, M. Peputapeck and F. E. Alberts, J. Mater. Eng. Perform. 1994, vol. 3, pp. 73-81.10.1007/BF02654502 ↗