journal article·2019-03-15

The Effects of Silicon Addition on the Microstructure and Mechanical Properties of a Mg-Al-Sn Alloy Produced by Vacuum Assisted High Pressure Die Casting

Andrew D. Klarner, Jiashi Miao, Weihua Sun, Alan A. Luo, Xiaoqing Zeng

Publisher page

Abstract

In this paper, the effects of a small addition of Si (about 0.4 wt pct) on the microstructure and mechanical properties of a Mg-Al-Sn alloy produced with vacuum assisted high pressure die casting (HPDC) are reported. CALculation of PHase Diagrams-based modeling was used to design the heat treatment schedules to optimize the precipitation of Mg2Sn and Mg17Al12 in the Mg-7Al-2Sn-0.4Si alloy (in wt pct, designated as ATS). The HPDC test specimens were studied in the as-cast condition as well as in multiple heat-treated conditions to improve their tensile properties. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques were used to characterize the microstructure in each condition. The results suggest that the small addition of Si is effective in enhancing and accelerating the precipitation hardening of Mg-7Al-2Sn alloy AT72, due to enhanced precipitation of Mg17Al12 and Mg2Sn phases as well as the precipitation of Mg2Si phase. In as-cast conditions, the new ATS alloy has similar strengths but significantly improved ductility compared with AZ91D, and significantly improved strength but reduced ductility compared with AM60B. The ATS-T6 after a one-stage solution treatment provides further improvement of mechanical properties: yield strength 151 MPa, ultimate tensile strength 253 MPa, and elongation 4.9 pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. M.O. Pekguleryuz, K. Kainer, A.A. Kaya: Fundamentals of Magnesium Alloy Metallurgy, Elsevier, London, 2013.10.1533/9780857097293 ↗
2. B. Landkof: in Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2000.
3. A.A. Luo: JOM, 2002, vol. 54, pp. 42–48.10.1007/BF02701073 ↗
4. D. Twarog, D. Apelian, A. Luo: High Integrity Casting of Lightweight Components, North American Die Casting Association, Arlington Heights, Illinois, 2016.
5. B.L. Mordike, T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
6. I.J. Polmear: Mater. Sci. Technol. 1994, vol. 10, pp. 1-16.10.1179/mst.1994.10.1.1 ↗
7. A.A. Luo: J. Magnes. Alloy. 2013, vol. 1, pp. 2–22.10.1016/j.jma.2013.02.002 ↗
8. X.P. Niu, B.H. Hu, I. Pinwill, H. Li: Journal of Materials Processing Technology, 2000, vol. 105, pp. 119-127.10.1016/S0924-0136(00)00545-8 ↗
9. A.A. Luo, P.H. Fu, Y.D. Yu, H.Y. Jiang, L.M. Peng, C.Q. Zhai, and A.K. Sachdev: North American Die Casting Association Transactions, T08-083, 2008.
10. E.J. Vinarcik: High Integrity Die Casting Processes, Wiley, New York, 2002.
11. Z. Brown, A.A. Luo, M. Musser, L.J. Ouimet, K. Sadayappan, J. Zindel, and R. Beals: North American Die Casting Association Transactions, T09-043, 2009.
12. A.A. Luo, A.K. Sachdev: International Journal of Metalcasting, 2010, vol. 4, pp. 51–58.10.1007/BF03355502 ↗
13. A.A. Luo, P. Fu, L. Peng, X. Kang, Z. Li, T. Zhu, Metall. Mater. Trans. A, 2012, vol. 43, pp. 360–368.10.1007/s11661-011-0820-y ↗
14. X. Shi, D. Li, A.A. Luo, B. Hu, L. Li, X. Zeng, W. Ding: Metall. Mater. Trans. A 2013, 44, 4788–4799.10.1007/s11661-013-1799-3 ↗
15. J.-F. Nie: Metall. Mater. Trans. A, 2012, vol. 43, pp. 3891–3939.10.1007/s11661-012-1217-2 ↗
16. S. Celotto, T.J. Bastow: Acta Mater., 2001, vol. 49, pp. 41-45.10.1016/S1359-6454(00)00305-0 ↗
17. S. Celotto: Acta Mater., 2000, vol. 48, pp. 1775–1787.10.1016/S1359-6454(00)00004-5 ↗
18. A.L. Bowles, C. Blawert, and N. Hort: in Magnesium Technology, A.A. Luo, ed., TMS, Warrendale, PA, 2004, pp. 307–10.
19. J. Chen, Z. Chen, H. Yan, F. Zhang, K. Liao: Journal of Alloys and Compounds, 2008, vol. 461, pp. 209-215.10.1016/j.jallcom.2007.07.066 ↗
20. H. Liu, Y. Chen, Y. Tang, S. Wei, G. Niu: J. Alloys Compd., 2007, vol. 440, pp. 122–126.10.1016/j.jallcom.2006.09.024 ↗
21. S. Beer, G. Frommeyer: Proceedings of the Magnesium Alloys their Application, 1992, pp. 317–24.
22. J. Du, K. Iwai, W. Li, J. Peng, Trans. Nonferrous Met. Soc. China, 2009, vol. 19, pp. 1051–1056.10.1016/S1003-6326(08)60405-7 ↗
23. H. Wang, W. Wang, M. Zha, N. Zheng, Z. Gu, D. Li, Q. Jiang, Mater. Chem. Phys., 2008, vol. 108, pp. 353–358.10.1016/j.matchemphys.2007.10.006 ↗
24. D.H. Kang, S.S. Park, N.J. Kim: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 555–560.10.1016/j.msea.2005.09.022 ↗
25. A. Klarner, W. Sun, J. Meier, and A.A. Luo, in Magnesium Technology 2016, A. Singh, K. Solanki, M.V. Manuel, M. Alderman, and N.R. Neelameggham, eds., TMS, Warrendale, PA, pp. 79–82.
26. L. Kaufman, A. John, Mater. Sci. Eng., 2014, vol. 70, pp. 3–6.
27. ASTM Standard: Standard Test Methods for Tension Testing Wrought and Cast Aluminum and Magnesium Alloy Products, ASTM International, West Conshohocken, PA, 2016.
28. Pandat software package and PanMagnesium thermodynamic database, 2017. http://www.computherm.com/.
29. A.A. Luo: CALPHAD, 2015, vol. 50, pp. 6-22.10.1016/j.calphad.2015.04.002 ↗
30. J. Campbell: Sci. Technol. 2008, vol. 42, pp. 5791–5794.10.1021/es800052w ↗
31. S.-M. Liang, D. Wu, and R. Schmid-Fetzer: Computational Thermodynamics Facilitate Solution Heat Treatment Design for Al and Mg Alloys, presentation at TMS annual meeting, Feb 14–18, 2016, Nashville, TN.
32. Y. Lu, Q. Wang, X. Zeng, W. Ding, Y. Zhu: J. Mater. Sci. Lett. 2001, vol. 20, 397–399.10.1023/A:1010921608719 ↗
33. D. Duly, Y. Brechet, B. Chenal: Acta Mater. 1992, vol. 40, pp. 2289–2300.10.1016/0956-7151(92)90147-7 ↗
34. E. Hornbogen: Metall. Trans. 1972, vol. 3, pp. 2717-2727.10.1007/BF02652839 ↗
35. G. Timelli, L. Otto, L. Arnberg, H. Laukli: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1747–1758.10.1007/s11661-008-9527-0 ↗
36. C. Liu, H. Chen, J. Nie: Scr. Mater, 2016, Vol. 123, 5-8.10.1016/j.scriptamat.2016.05.035 ↗
37. M.M. Avedesian and H. Baker, ASM Specialty Handbook, Magnesium and Magnesium Alloys, ASM International, Materials Park, OH, 1999.