journal article·2018-05

A New Cellular Automaton Method Coupled with a Rate-dependent (CARD) Model for Predicting Dynamic Recrystallization Behavior

M. Azarbarmas, M. Aghaie-Khafri

Publisher page

Abstract

A comprehensive cellular automaton (CA) model should be coupled with a rate-dependent (RD) model for analyzing the RD deformation of alloys at high temperatures. In the present study, a new CA technique coupled with an RD model—namely, CARD—was developed. The proposed CARD model was used to simulate the dynamic recrystallization phenomenon during the hot deformation of the Inconel 718 superalloy. This model is capable of calculating the mean grain size and volume fraction of dynamic recrystallized grains, and estimating the phenomenological flow behavior of the material. In the presented model, an actual orientation definition comprising three Euler angles was used by implementing the electron backscatter diffraction data. For calculating the lattice rotation of grains, it was assumed that all slip systems of grains are active during the high-temperature deformation because of the intrinsic rate dependency of the procedure. Moreover, the morphological changes in grains were obtained using a topological module.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. 1. H. Y. Zhang, S. H. Zhang, Z. X. Li, and M. Cheng: Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2010, vol. 224, pp. 103–10.10.1243/09544054JEM1571 ↗
2. 2. M. Aghaie-Khari, N. Golarzi: J. Mater. Sci. 2008, vol. 43, pp. 3717–24.10.1007/s10853-008-2604-3 ↗
3. 3. M. A. Steiner, R. J. McCabe, E. Garlea, and S. R. Agnew: J. Nucl. Mater. 2017, vol. 492, pp. 74–87.10.1016/j.jnucmat.2017.04.026 ↗
4. M. Taheri, M.R. Abutalebi, H. Seyedeyn, and B. Mohammadsadeghi: J. Metall. Mater. Eng. 2017, vol. 28, pp. 37–50.
5. 5. K. Adam, J. M. Root, Z. Long, and D. P. Field: J. Mater. Eng. Perform. 2017, vol. 26, pp. 207–13.10.1007/s11665-016-2436-2 ↗
6. 6. K. Piękoś, J. Tarasiuk, K. Wierzbanowski, and B. Bacroix: Comput. Mater. Sci. 2008, vol. 42, pp. 584–94.10.1016/j.commatsci.2007.09.014 ↗
7. Y. Mellbin, H. Hallberg, and M. Ristinmaa: 9th Eur. Solid Mech. Conf. 2015.
8. 8. A. Vondrous, P. Bienger, S. Schreijäg, M. Selzer, D. Schneider, B. Nestler, D. Helm, and R. Mönig: Comput. Mech. 2015, vol. 55, pp. 439–52.10.1007/s00466-014-1115-0 ↗
9. 9. T. Takaki and Y. Tomita: Int. J. Mech. Sci. 2010, vol. 52, pp. 320–8.10.1016/j.ijmecsci.2009.09.037 ↗
10. 10. S. P. Chen and S. Van der Zwaag: Metall. Mater. Trans. A 2004, vol. 35, pp. 741–9.10.1007/s11661-004-0002-2 ↗
11. 11. S. P. Chen and S. Van der Zwaag: Metall. Mater. Trans. A 2006, vol. 37, pp. 2859–69.10.1007/BF02586118 ↗
12. 12. H. W. Lee and Y.-T. Im: Mater. Trans. 2010, vol. 51, pp. 1614–20.10.2320/matertrans.M2010116 ↗
13. 13. H. W. Lee and Y.-T. Im: Int. J. Mech. Sci. 2010, vol. 52, pp. 1277–89.10.1016/j.ijmecsci.2010.03.012 ↗
14. 14. P. Asadi, M. K. B. Givi, and M. Akbari: Int. J. Adv. Manuf. Technol. 2016, vol. 83, pp. 301–11.10.1007/s00170-015-7595-z ↗
15. 15. F. Ohi and Y. Takamatsu: Jpn. J. Ind. Appl. Math. 2001, vol. 18, 59.10.1007/BF03167355 ↗
16. F.J. Humphreys and M. Hatherly, Recrystallization and Related Annealing Phenomena: Elsevier, New York, 2nd edition, 2004.
17. W. 1 Kurz, B. Giovanola, and R. Trivedi: Acta Metall. 1986, vol. 34, pp. 823–30.10.1016/0001-6160(86)90056-8 ↗
18. 18. Y. C. Lin, Y.-X. Liu, M.-S. Chen, M.-H. Huang, X. Ma, and Z.-L. Long: Mater. Des. 2016, vol. 99, pp. 107–14.10.1016/j.matdes.2016.03.050 ↗
19. 19. F. Han, B. Tang, H. Kou, J. Li, and Y. Feng: J. Mater. Sci. 2013, vol. 48, pp. 7142–52.10.1007/s10853-013-7530-3 ↗
20. 20. L. Sieradzki and L. Madej: Comput. Mater. Sci. 2013, vol. 67, pp. 156–73.10.1016/j.commatsci.2012.08.047 ↗
21. 21. F. Han, B. Tang, H. Kou, L. Cheng, J. Li, and Y. Feng: J. Mater. Sci. 2014, vol. 49, pp. 3253–67.10.1007/s10853-014-8031-8 ↗
22. 22. M. Kühbach, G. Gottstein, and L. A. Barrales-Mora: Acta Mater. 2016, vol. 107, pp. 366–76.10.1016/j.actamat.2016.01.068 ↗
23. 23. C. Zheng and D. Raabe: Acta Mater. 2013, vol. 61, pp. 5504–17.10.1016/j.actamat.2013.05.040 ↗
24. 24. T. Zhang, S. Lu, Y. Wu, and G. Hai: Trans. Nonferrous Met. Soc. China 2017, vol. 27, pp. 1327–37.10.1016/S1003-6326(17)60154-7 ↗
25. M. Azarbarmas and M. Aghaie-Khafri: Model. Simul. Mater. Sci. Eng. 2017, vol. 25, pp. 1–24.10.1088/1361-651X/aa7f1d ↗
26. 26. M. Sitko, M. Pietrzyk, and L. Madej: J. Comput. Sci. 2016, vol. 16, pp. 98–113.10.1016/j.jocs.2016.05.007 ↗
27. 27. Z.-Y. Jin, L. Juan, Z.-S. Cui, and D.-L. Wei: Trans. Nonferrous Met. Soc. China 2010, vol. 20, pp. 458–64.10.1016/S1003-6326(09)60162-X ↗
28. 28. J. Li, Z. Xie, S. Li, and Y. Zang: J. Cent. South Univ. 2016, vol. 23, pp. 497–507.10.1007/s11771-016-3095-z ↗
29. 29. H.P. Ji, L.G. Zhang, J. Liu, and T.Y. Wang: Key Eng. Mater. 2016, vol. 693, pp. 548–53.10.4028/www.scientific.net/KEM.693.548 ↗
30. 30. N. Xiao, C. Zheng, D. Li, and Y. Li: Comput. Mater. Sci. 2008, vol. 41, pp. 366–74.10.1016/j.commatsci.2007.04.021 ↗
31. 31. D. Raabe and R. C. Becker: Model. Simul. Mater. Sci. Eng. 2000, vol. 8, 445.10.1088/0965-0393/8/4/304 ↗
32. 32. H. Li, X. Sun, and H. Yang: Int. J. Plast. 2016, vol. 87, pp. 154–80.10.1016/j.ijplas.2016.09.008 ↗
33. 33. J. De Jaeger, D. Solas, O. Fandeur, J.-H. Schmitt, and C. Rey: Mater. Sci. Eng. A 2015, vol. 646, pp. 33–44.10.1016/j.msea.2015.08.038 ↗
34. 34. S. Shabaniverki and S. Serajzadeh: Appl. Math. Model. 2016, vol. 40, pp. 7571–82.10.1016/j.apm.2016.01.060 ↗
35. 35. Y.-X. Liu, Y. C. Lin, H.-B. Li, D.-X. Wen, X.-M. Chen, and M.-S. Chen: Mater. Sci. Eng. A 2015, vol. 626, pp. 432–40.10.1016/j.msea.2014.12.092 ↗
36. 36. L. Cheng, X. Xue, B. Tang, D. Liu, J. Li, H. Kou, and J. Li: Mater. Sci. Eng. A 2014, vol. 606, pp. 24–30.10.1016/j.msea.2014.03.075 ↗
37. 37. Y. Zhang, S. Huili, A. A. Volinsky, B. Tian, Z. Chai, P. Liu, and Y. Liu: J. Mater. Eng. Perform. 2016, vol. 25, pp. 1150–6.10.1007/s11665-016-1914-x ↗
38. 38. G. Taylor: J. Inst. Met. 1938, vol. 62, pp. 307–24.
39. 39. H. Mecking and U. F. Kocks: Acta Metall. 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗
40. 40. Y. Zhang, S. Jiang, Y. Liang, and L. Hu: Comput. Mater. Sci. 2013, vol. 71, pp. 124–34.10.1016/j.commatsci.2013.01.019 ↗
41. 41. L. I. U. Xiao, L. Li, F. He, Z. Jia, B. Zhu, and L. Zhang: Trans. Nonferrous Met. Soc. China 2013, vol. 23, pp. 2692–9.10.1016/S1003-6326(13)62786-7 ↗
42. 42. H. W. Lee, S.-H. Kang, and Y. Lee: Int. J. Precis. Eng. Manuf. 2014, vol. 15, pp. 1055–62.10.1007/s12541-014-0436-4 ↗
43. 43. H. Hallberg, M. Wallin, and M. Ristinmaa: Comput. Mater. Sci. 2010, vol. 49, pp. 25–34.10.1016/j.commatsci.2010.04.012 ↗
44. 44. F. J. Humphreys: Acta Mater. 1997, vol. 45, pp. 4231–40.10.1016/S1359-6454(97)00070-0 ↗
45. 45. C. Haase, M. Kühbach, L. A. Barrales-Mora, S. L. Wong, F. Roters, D. A. Molodov, and G. Gottstein: Acta Mater. 2015, vol. 100, pp. 155–68.10.1016/j.actamat.2015.08.057 ↗
46. 46. F. Chen, K. Qi, Z. Cui, and X. Lai: Comput. Mater. Sci. 2014, vol. 83, pp. 331–40.10.1016/j.commatsci.2013.11.029 ↗
47. 47. H. Yang, C. Wu, H. Li, and X. Fan: Sci. China Technol. Sci. 2011, vol. 54, pp. 2107–18.10.1007/s11431-011-4464-3 ↗
48. 48. Z. Li, Q. Xu, and B. Liu: Comput. Mater. Sci. 2015, vol. 107, pp. 122–33.10.1016/j.commatsci.2015.05.020 ↗
49. 49. J. I. Soto: Math. Geol. 1997, vol. 29, pp. 93–130.10.1007/BF02769621 ↗
50. X. Ma, C.-W. Zheng, X.-G. Zhang, and D.-Z. Li: Acta Metall. Sin. (Engl. Lett.) 2016, vol. 29, pp. 1127–35.10.1007/s40195-016-0502-2 ↗
51. 51. F. Chen, Z. Cui, J. Liu, W. Chen, and S. Chen: Mater. Sci. Eng. A 2010, vol. 527, pp. 5539–49.10.1016/j.msea.2010.05.021 ↗
52. V. A. Lubarda, Elastoplasticity Theory: CRC press, 2001.10.1201/9781420040784 ↗
53. 53. L. Duchene, T. Lelotte, P. Flores, S. Bouvier, and A.-M. Habraken: Int. J. Plast. 2008, vol. 24, pp. 397–427.10.1016/j.ijplas.2007.03.015 ↗
54. A. S. Khan and S. Huang, Continuum Theory of Plasticity: John Wiley & Sons, 1995.
55. S. Ahmadi, A New Eulerian-Based Double Continuity Model for Predicting the Evolution of Pair Correlation Statistics under Large Plastic Deformations: Brigham Young University-Provo, 2010.
56. 56. S. Ghosh, P. Gabane, A. Bose, and N. Chakraborti: Comput. Mater. Sci. 2009, vol. 45, pp. 96–103.10.1016/j.commatsci.2008.02.032 ↗
57. 57. H. W. Hesselbarth and I. R. Göbel: Acta Metall. Mater. 1991, vol. 39, pp. 2135–43.10.1016/0956-7151(91)90183-2 ↗
58. 58. M. Azarbarmas, M. Aghaie-Khafri, J. M. Cabrera, and J. Calvo: Mater. Des. 2016, vol. 94, pp. 28–38.10.1016/j.matdes.2015.12.157 ↗
59. 59. M. Azarbarmas, M. Aghaie-Khafri, J. M. Cabrera, and J. Calvo: Mater. Sci. Eng. A 2016, vol. 678, pp. 137–52.10.1016/j.msea.2016.09.100 ↗
60. 60. L. Huang, F. Qi, P. Hua, L. Yu, F. Liu, W. Sun, and Z. Hu: Metall. Mater. Trans. A 2015, vol. 46, 4276.10.1007/s11661-015-3031-0 ↗
61. 61. Y. Wang, W. Z. Shao, L. Zhen, and X. M. Zhang: Mater. Sci. Eng. A 2008, vol. 486, pp. 321–32.10.1016/j.msea.2007.09.008 ↗
62. 62. H. Beladi, P. Cizek, and P. D. Hodgson: Acta Mater. 2011, vol. 59, pp. 1482–92.10.1016/j.actamat.2010.11.012 ↗
63. 63. Y. G. Liu, M. Q. Li, and J. Luo: Mater. Sci. Eng. A 2013, vol. 574, pp. 1–8.10.1016/j.msea.2013.03.011 ↗
64. T. Yu, N. Hansen, and X. Huang: Proc. R. Soc. London A Math. Phys. Eng. Sci. (The Royal Society), 2011, pp. 3039–65.10.1098/rspa.2011.0097 ↗
65. 65. P. R. Rios, F. Siciliano Jr., H. R. Z. Sandim, R. L. Plaut, and A. F. Padilha: Mater. Res. 2005, vol. 8, pp. 225–38.10.1590/S1516-14392005000300002 ↗
66. 66. M. S. Salehi and S. Serajzadeh: Comput. Mater. Sci. 2013, vol. 69, pp. 53–61.10.1016/j.commatsci.2012.11.028 ↗
67. 67. V. Randle and O. Engler, Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping: CRC Press, 2000.10.1201/9781482287479 ↗