A Novel Approach for Controlling the Band Formation in Medium Mn Steels
Source abstract
Abstract
Abstract Formation of the microstructural ferrite/pearlite bands in medium Mn steels is an undesirable phenomenon commonly addressed through fast cooling treatments. In this study, a novel approach using the cyclic partial phase transformation concept is applied successfully to prevent microstructural band formation in a micro-chemically banded Fe-C-Mn-Si steel. The effectiveness of the new approach is assessed using the ASTM E1268-01 standard. The cyclic intercritical treatments lead to formation of isotropic microstructures even for cooling rates far below the critical one determined in conventional continuous cooling. In contrast, isothermal intercritical experiments have no effect on the critical cooling rate to suppress microstructural band formation. The origin of the suppression of band formation either by means of fast cooling or a cyclic partial phase transformation is investigated in detail. Theoretical modeling and microstructural observations confirm that band formation is suppressed only if the intercritical annealing treatment leads to partial reversion of the austenite-ferrite interfaces. The resulting interfacial Mn enrichment is responsible for suppression of the band formation upon final cooling at low cooling rates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. H. Song, S.S. Sohn, J.-H. Kwak, B.-J. Lee, and S. Lee: Metall. Mater. Trans. A, 2016, vol. 47, pp. 2674–85.10.1007/s11661-016-3433-7 ↗
2. A. Mayyas, A. Qattawi, M. Omar, and D. Shan: Renew. Sustain. Energy Rev., 2012, vol. 16, pp. 1845–62.10.1016/j.rser.2012.01.012 ↗
3. R. Kuziak, R. Kawalla, and S. Wanegler: Arch. Civ. Mech. Eng., 2008, vol. 8, pp. 103–17.10.1016/S1644-9665(12)60197-6 ↗
4. S.W. Thompson and P.R. Howell: Mater. Sci. Technol., 1992, vol. 8, pp. 777–84.10.1179/mst.1992.8.9.777 ↗
5. S.E. Offerman, N.H. van Dijk, M.T. Rekveldt, J. Sietsma, and S. van der Zwaag: Mater. Sci. Technol., 2002, vol. 18, pp. 297–303.10.1179/026708301225000752 ↗
6. W. Xu, P.E.J. Rivera Díaz Del Castillo, and S. van der Zwaag: ISIJ Int., 2005, vol. 45, pp. 380–7.10.2355/isijinternational.45.380 ↗
7. R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 417–26.10.1007/BF02663328 ↗
8. R. Feng, S. Li, X. Zhu, and Q. Ao: J. Alloys Compd., 2015, vol. 646, pp. 787–93.10.1016/j.jallcom.2015.05.128 ↗
9. Y. Karimi, S. Hossein Nedjad, G. Miyamoto, H. Shirazi, and T. Furuhara: Mater. Sci. Eng. A, 2017, vol. 697, pp. 1–7.10.1016/j.msea.2017.05.006 ↗
10. F.G. Caballero, A. García-Junceda, C. Capdevila, and C.G. De Andrés: Mater. Trans., 2006, vol. 47, pp. 2269–76.10.2320/matertrans.47.2269 ↗
11. J. Komenda and R. Sandström: Mater. Charact., 1993, vol. 31, pp. 143–53.10.1016/1044-5803(93)90055-Z ↗
12. F.A. Khalid, M. Farooque, A. Ul Haq, and A.Q. Khan: Mater. Sci. Technol., 1999, vol. 15, pp. 1209–15.10.1179/026708399101505121 ↗
13. R. Grossterlinden, R. Kawalla, U. Lotter, and H. Pircher: Steel Res., 1992, vol. 63, pp. 331–36.10.1002/srin.199200529 ↗
14. J.S. Kirkaldy, J. von Destinon-Forstmann, and R.J. Brigham: Can. Metall. Q., 1962, vol. 1, pp. 59–81.10.1179/cmq.1962.1.1.59 ↗
15. A. From and R. Sandström: Mater. Charact., 1998, vol. 41, pp. 11–26.10.1016/S1044-5803(98)00019-9 ↗
16. K. Mukherjee, L.S. Thomas, C. Bos, D.K. Matlock, and J.G. Speer: Mater. Sci. Forum, 2014, vol. 783-786, pp. 1067–72.10.4028/www.scientific.net/MSF.783-786.1067 ↗
17. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9, pp. 286–96.10.1361/105994900770345935 ↗
18. F.W. Y. Zhang, Y, H. Liu, X. Ruan, G. Li, L. Bai, Y.-L. Zhang, H.-Y. Liu, X.-J. Ruan, G.-Z. Li, L.-G. Bai, and F.-M. Wang: Beijing Keji Daxue Xuebao/Journal Univ. Sci. Technol. Beijing, 2009, vol. 31, pp. 199–206.
19. H. Chen and S. van der Zwaag: Metall. Mater. Trans. A, 2016, pp. 1–10.
20. H. Chen, B. Appolaire, and S. van der Zwaag: Acta Mater., 2011, vol. 59, pp. 6751–60.10.1016/j.actamat.2011.07.033 ↗
21. H. Chen and S. van der Zwaag: Acta Mater., 2013, vol. 61, pp. 1338–49.10.1016/j.actamat.2012.11.011 ↗
22. J. Zhu, R. Ding, J. He, Z. Yang, C. Zhang, and H. Chen: Scr. Mater., 2017, vol. 136, pp. 6–10.10.1016/j.scriptamat.2017.03.038 ↗
23. T.A. Kop, J. Sietsma, and S. van der Zwaag: Mater. Sci. Technol., 2001, vol. 17, pp. 1569–74.10.1179/026708301101509629 ↗
24. S.M.C. van Bohemen and L. Morsdorf: Acta Mater., 2017, vol. 125, pp. 401–15.10.1016/j.actamat.2016.12.029 ↗
25. A. Verma, M. Sundararaman, J.B. Singh, and S.A. Nalawade: Meas. Sci. Technol., 2010, vol. 21, p. 105106.10.1088/0957-0233/21/10/105106 ↗
26. Y.. Liu, F. Sommer, and E.. Mittemeijer: Thermochim. Acta, 2004, vol. 413, pp. 215–25.10.1016/j.tca.2003.10.005 ↗
27. G. Mohapatra, F. Sommer, and E.J. Mittemeijer: Thermochim. Acta, 2007, vol. 453, pp. 31–41.10.1016/j.tca.2006.11.007 ↗
28. ASTM E1268-01(2016): 2016.
29. M.A. Gutiérrez, H. Khanbareh, and S. van der Zwaag: Comput. Mater. Sci., 2016, vol. 112, pp. 139–46.10.1016/j.commatsci.2015.10.011 ↗
30. The Math Works Inc: 2007.
31. J.A. Eckert, P.R. Howell, and S.W. Thompson: J. Mater. Sci., 1993, vol. 28, pp. 4412–20.10.1007/BF01154950 ↗
32. P.E.J. Rivera Díaz Del Castillo, S. van der Zwaag, and J. Sietsma: Metall. Mater. Trans. A, 2004, vol. 35, pp. 425–33.10.1007/s11661-004-0353-8 ↗
33. P.E.J. Rivera-Díaz-del-Castillo and S. van der Zwaag: steel Res. Int., 2004, vol. 75, pp. 711–115.10.1002/srin.200405832 ↗
34. H.K.D.H. Bhadeshia: Met. Sci., 1982, vol. 16, pp. 159–66.10.1179/030634582790427217 ↗
35. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
36. H. Chen and S. van der Zwaag: Philos. Mag. Lett. https://doi.org/10.1080/09500839.2011.634840.10.1080/09500839.2011.634840 ↗