journal article·2018-03Open access

Design of Wear-Resistant Austenitic Steels for Selective Laser Melting

J. N. Lemke, R. Casati, N. Lecis, C. Andrianopoli, A. Varone, R. Montanari, M. Vedani

Abstract

Type 316L stainless steel feedstock powder was modified by alloying with powders containing carbide/boride-forming elements to create improved wear-resistant austenitic alloys that can be readily processed by Selective Laser Melting. Fe-based alloys with high C, B, V, and Nb contents were thus produced, resulting in a microstructure that consisted of austenitic grains and a significant amount of hard carbides and borides. Heat treatments were performed to modify the carbide distribution and morphology. Optimal hard-phase spheroidization was achieved by annealing the proposed alloys at 1150 °C for 1 hour followed by water quenching. The total increase in hardness of samples containing 20 pct of C/B-rich alloy powder was of 82.7 pct while the wear resistance could be increased by a factor of 6.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. M.Y. Demeri: Advanced High-Strength Steels - Science, Technology, and Application, ASM International, Ohio, OH, 201310.31399/asm.tb.ahsssta.9781627082792 ↗
2. J.W. Simmons: Materials Science and Engineering A, 1996, vol. 207, pp. 159-169.10.1016/0921-5093(95)09991-3 ↗
3. H. Sieurin, J. Zander, R. Sandström: Materials Science and Engineering A, 2006, vol. 415, pp. 66-71.10.1016/j.msea.2005.09.031 ↗
4. H.C. Shin, T.K. Ha, Y.W. Chang: Scripta Materialia, 2001, vol. 45, pp. 823-829.10.1016/S1359-6462(01)01101-0 ↗
5. I.I. Kositsyna: Metal Science and Heat Treatment, 2008, vol. 50, pp. 459-467.10.1007/s11041-009-9080-5 ↗
6. K. Tokaji, T. Horie, Y. Enomoto: International Journal of Fatigue, 2006, vol. 28, pp. 281-288.10.1016/j.ijfatigue.2005.05.009 ↗
7. V. Kuzucu, M. Aksoy, M.H. Korkut: Journal of Materials Processing Technology, 1998, vol. 82, pp. 165-171.10.1016/S0924-0136(98)00028-4 ↗
8. M. Kulka, A. Pertek, L. Klimek: Materials Characterization, 2006, vol.56, pp. 232-240.10.1016/j.matchar.2005.11.013 ↗
9. I. Mejía, A. Bedolla-Jacuinde, C. Maldonado, J.M. Cabrera: Materials Science and Engineering A, 2011, vol. 528, pp. 4468-4474.10.1016/j.msea.2011.02.040 ↗
10. W.E. Frazier: Journal of Materials Engineering and Performance, 2014, vol. 23, pp. 1917-1928.10.1007/s11665-014-0958-z ↗
11. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315-360.10.1080/09506608.2015.1116649 ↗
12. W.E. King, A.T. Anderson, R.M. Ferencz, N.E. Hodge, C. Kamath, S.A. Khairallah, and A.M. Rubenchik: Appl. Phys. Rev., 2015, vol. 2, pp. 041304-1–041304-26.10.1063/1.4937809 ↗
13. J.P. Kruth, L. Froyen, J. Van Vaerenbergh, P. Mercelis, M. Rombouts, B. Lauwers: Journal of Materials Processing Technology, 2004, vol. 149, pp. 616-622.10.1016/j.jmatprotec.2003.11.051 ↗
14. J.A. Cherry, H.M. Davies, S. Mehmood, N.P. Lavery, S.G.R. Brown, J. Sienz: The International Journal of Advanced Manufacturing Technology, 2015, vol. 76, pp. 869-879.10.1007/s00170-014-6297-2 ↗
15. D. Wang, C. Song, Y. Yang, Y. Bai: Materials & Design, 2016, vol. 100, pp. 291-299.10.1016/j.matdes.2016.03.111 ↗
16. R. Casati, J. Lemke, M. Vedani: Journal of Materials Science and Technology, 2016, vol. 32, pp. 738-744.10.1016/j.jmst.2016.06.016 ↗
17. E.J. Pavlina, C.J. Van Tyne: Journal of Materials Engineering and Performance, 2008, vol. 17, pp. 888-893.10.1007/s11665-008-9225-5 ↗
18. F. Feuerhahn, A. Schulz, T. Seefeld, F. Vollertsen. Physics Procedia, 2013, vol. 41, pp. 843-848.10.1016/j.phpro.2013.03.157 ↗
19. J. Sander, J. Hufenbach, L. Giebeler, H. Wendrock, U. Kühn, J. Eckert: Materials and Design, 2016, vol. 89, ppp. 335-341.10.1016/j.matdes.2015.09.148 ↗
20. M.J. Holzweissig, A. Taube, F. Brenne, M. Schaper, T. Niendorf: Metallurgical and Materials Transactions B, 2015, vol. 46, pp. 545-549.10.1007/s11663-014-0267-9 ↗
21. M.A. Taha, A.F.Yousef, K.A. Gany, H.A. Sabour: Material Wissenschaft und Werkstofftechnik, 2013, vol. 43, pp. 913-23.10.1002/mawe.201200030 ↗
22. T. Niendorf, S. Leuders, A. Riemer, H.A. Richard, T. Tröster, D. Schwarze: Metallurgical and Materials Transactions B, 2013, vol. 44, pp. 794–796.10.1007/s11663-013-9875-z ↗
23. L. Thijs, K. Kempen, J.-P. Kruth, J. Van Humbeeck: Acta Materialia, 2013, vol. 61, pp. 1809-1819.10.1016/j.actamat.2012.11.052 ↗
24. M. Ziętala, T. Durejko, M. Polański, I. Kunce, T. Płociński, W. Zieliński, M. Łazińska, W. Stępniowski, T. Czujko, K. J. Kurzydłowski, Z. Bojar: Materials Science and Engineering A: 2016, vol. 677, pp. 1-10.10.1016/j.msea.2016.09.028 ↗
25. D.S. Petrovic, G. Klancnik, M. Pirnat, J. Medvet: Journal of Thermal Analysis and Calorimetry, 2011, vol. 105, pp. 251-257.10.1007/s10973-011-1375-2 ↗
26. K.O. Bazaleeva, E.V. Tsvetkova, E.V. Balakirev, I.A. Yadroitsev, I.Y. Smurov: Russian Metallurgy (Metally), 2016, vol. 5, pp. 424-430.10.1134/S0036029516050062 ↗
27. P. Mercelis, J.-P. Kruth: Rapid Prototyping Journal, 2006, vol. 12, pp. 254-65.10.1108/13552540610707013 ↗
28. Y. Liu, Y. Yang, D. Wang: International Journal of Advanced Manufacturing Technologies, 2016, vol. 87, pp. 647–56.10.1007/s00170-016-8466-y ↗
29. X. Feaugas, H. Haddou: Metallurgical and Materials Transactions A, 2003, vol. 34, pp. 2329-2340.10.1007/s11661-003-0296-5 ↗
30. G. Marnier, C. Keller, J. Nouderm, E. Hug: Materials and Design, 2014, vol.63, pp. 633-640.10.1016/j.matdes.2014.06.053 ↗
31. O. Takakuwa, Y. Kawaragi, H. Soyama: Journal of Surface Engineered Materials and Advanced Technology, 2013, vol. 3, pp. 262-268.
32. J.T. Busby, M.C. Hash, G.S. Was: Journal of Nuclear Materials, 2005, vol. 336, pp. 267-278.10.1016/j.jnucmat.2004.09.024 ↗
33. R. Casati, M. Vedani: Metals, 2014, vol. 4, pp. 65-83.10.3390/met4010065 ↗
34. Z. Zhang, D.L. Chen: Scripta Materialia, 2006, vol. 54, pp. 1321–1326.10.1016/j.scriptamat.2005.12.017 ↗
35. C.C. Hsieh, W. Wu: ISRN Metallurgy, 2012. https://dx.doi.org/10.5402/2012/732471.10.5402/2012/732471 ↗