Phase Stability in the Fe-Rich Fe-Cr-Ni-Zr Alloys
Source abstract
Abstract
Knowledge on phase stability in Fe-rich Fe-Cr-Ni-Zr alloys is needed for the development of Laves phase strengthened Fe-Cr-Ni-Zr ferritic alloys. These alloys show promising applications as new cladding materials of nuclear reactors due to enhanced high-temperature strength and resistance to creep and irradiation hardening. Phase stability in four Fe-rich Fe-Cr-Ni-Zr alloys was carefully investigated using scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction techniques. The samples were arc-melted and heat treated at 973.15 K (700 °C) for 1275 hours and 1273.15 K (1000 °C) for 336 hours. The experimental results showed extensive solubility of Ni in the intermetallic phases Fe23Zr6 and Fe2Zr_C15. Nickel stabilizes the Laves Fe2Zr_C15 structure more than the C36 and C14 structures. In addition to Fe23Zr6 and Fe2Zr_C15, Ni7Zr2 was found to be stable in samples with higher Ni content and lower annealing temperature. The Fe2Zr_C15 and Fe23Zr6 coexist with the body-centered cubic matrix phase in all samples regardless of compositions and temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. L. Tan, Y. Yang, Metall. Mater. Trans. A, 2014, vol. 46A, pp. 1188–1195.
2. L. Tan: Tech. Rep. 2015, ORNL/TM-2015/595, Oak Ridge National Laboratory, Oak Ridge .
3. L. Tan and Y. Yang: Tech. Rep. 2015, ORNL/TM-2015/727, Oak Ridge National Laboratory, Oak Ridge.
4. D.P. Abraham, S.M. McDeavitt, J. Park, Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2151–2159.10.1007/BF02651870 ↗
5. D.P. Abraham, J.W. Richardson Jr., S.M. McDeavitt, Mater. Sci. Eng., A, 1997, vol. A239-240, pp. 658–664.10.1016/S0921-5093(97)00649-7 ↗
6. D.P. Abraham and J.W. Richardson Jr.: Tech. Rep. 1999, ANL/CMT/CP-96870, Argonne National Laboratory, Lemont.
7. D.P. Abraham, J.W. Richardson Jr., S.M. McDeavitt, J. Mater. Sci. 2001, vol. 36, pp. 5143–5154.10.1023/A:1012433526079 ↗
8. D.P. Abraham, N. Dietz, Mater. Sci. Eng., A, 2002, vol. 329–331, pp. 610–615.10.1016/S0921-5093(01)01512-X ↗
9. M. Ahmad, J.I. Akhter, M.A. Shaikh, M. Akhtar, M. Iqbal, M.A. Chaudhry, J. Nucl. Mater. 2002, vol. 301, pp. 118–121.10.1016/S0022-3115(01)00757-7 ↗
10. N. Das, P. Sengupta, S. Roychowdhury, G. Sharma, P.S. Gawde, A. Arya, V. Kain, U.D. Kulkarni, J.K. Chakravartty, G.K. Dey, J. Nucl. Mater. 2012, vol. 420, pp. 559–574.10.1016/j.jnucmat.2011.11.008 ↗
11. S. Yang, J. Zhang, C. Wang, W. Yu, Z. Shi, X. Liu, J. Mater. Res. 2016, vol. 31, pp. 2407–2414.10.1557/jmr.2016.125 ↗
12. D.P. Abraham, J.W. Richardson Jr., S.M. McDeavitt, Scr. Mater. 1997, vol. 37, pp. 239–244.10.1016/S1359-6462(97)00074-2 ↗
13. F. Stein, G. Sauthoff, M. Palm, J. Phase Equilib. 2002, vol. 23, pp. 480.10.1361/105497102770331172 ↗
14. Y. Yang, L. Tan, H. Bei, J.T. Busby, J. Nucl. Mater. 2013, vol. 441, pp. 190–202.10.1016/j.jnucmat.2013.05.061 ↗