Microstructural Modeling of Pitting Corrosion in Steels Using an Arbitrary Lagrangian–Eulerian Method
Source abstract
Abstract
Two microscale numerical models are developed in this work using a moving-mesh approach to investigate the growth process of pitting in different iron phases and the corrosion prevention capability of polyaniline (PANi) on steels. The distributions of corrosion potential and current in the electrolyte-coating-steel system are computed to evaluate the anti-corrosion ability of PANi. The arbitrary Lagrangian–Eulerian approach was used to accomplish the continuous remesh process as was needed to simulate the dynamic growing forefront of the modeled pitting domain. Experimental validation of the numerical models was conducted using the technique of scanning kelvin probe force microscopy (SKPFM). The SKPFM-scanned surface topography and Volta potential difference exhibit comparable results to and thereby prove the numerical results. The potential distribution in the electrolyte phase of the validated models shows that the corrosion pit grows faster in the epoxy-only-coated steel than that in the PANi-primer-coated steel over the simulation time; also, the corrosion pit grows faster in the ferrite phase than in the cementite phase. The simulation results indicate that the epoxy-only coating lost its anti-corrosion capability as the coating was penetrated by electrolyte, while the PANi-based coating can still protect the steel from corrosion after the electrolyte penetration. The models developed in this work can be used to study the mechanisms of pitting corrosion as well as develop more effective corrosion prevention strategies for general metallic materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Composite Structure Analysis and Optimization · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. P.R. Roberge: Corrosion Engineering: Principles and Practice. McGraw-Hill, New York, NY, 2008, pp. 30-45.
2. G.H. Koch, M.P. Brongers, N.G. Thompson, Y.P. Virmani, and J.H. Payer: Federal Highway Administration Report - No. FHWA-RD-01-156, 2002, pp. 10–21.
3. E.E. Stansbury and R.A. Buchanan: Fundamentals of Electrochemical Corrosion. ASM International, Materials Park, OH, 2000, pp. 23–30.10.31399/asm.tb.fec.9781627083027 ↗
4. S.M. Sharland: Corrosion Science, 1987, vol. 27, pp. 289-323.10.1016/0010-938X(87)90024-2 ↗
5. T. Ohtsuka: Int. J. Corros., vol. 2012, 2012, Article ID 915090.
6. M. Rohwerder: International Journal of Materials Research, 2009, vol. 100, pp. 1331-42.10.3139/146.110205 ↗
7. M.I. Khan, A.U. Chaudhry, S. Hashim, M.K. Zahoor and M.Z. Iqbal: Chemical Engineering Research Bulletin, 2010, vol. 14, pp. 73-86.10.3329/cerb.v14i2.5918 ↗
8. E.W. Brooman: Metal Finishing, 2002, vol. 100, pp. 104-110.10.1016/S0026-0576(02)80446-9 ↗
9. S.P. Sitaram, J.O. Stoffer, and T.J. O’Keefe: Journal of Coatings Technology, 1997, vol. 69, pp. 65-69.10.1007/BF02696146 ↗
10. P.P. Deshpande, N.G. Jadhav, V.J. Gelling, and D. Sazou: Journal of Coatings Technology and Research, 2014, vol. 11, pp. 473-494.10.1007/s11998-014-9586-7 ↗
11. S.G.R. Brown, and N.C. Barnard: Corrosion science, 2006, vol. 48, pp. 2291-2303.10.1016/j.corsci.2005.08.015 ↗
12. F. Thébault, B. Vuillemin, R. Oltra, K. Ogle and C. Allely: Electrochimica Acta, 2008, vol. 53, pp. 5226-5234.10.1016/j.electacta.2008.02.066 ↗
13. N. Murer, R. Oltra, B. Vuillemin and O. Néel: Corrosion Science, 2010, vol. 52, pp. 130-139.10.1016/j.corsci.2009.08.051 ↗
14. L.C. Abodi, J.A. DeRose, S. Van Damme, A. Demeter, T. Suter, and J. Deconinck: Electrochimica Acta, 2012, vol. 63, pp. 169-178.10.1016/j.electacta.2011.12.074 ↗
15. S.R. Cross, S. Gollapudi, and C.A. Schuh: Corrosion Science, 2014, vol. 88, pp. 226-233.10.1016/j.corsci.2014.07.033 ↗
16. K.B. Deshpande: Corrosion Science, 2010, vol. 52, pp. 3514-3522.10.1016/j.corsci.2010.06.031 ↗
17. T. Pan and Q. Yu: Anti-Corros. Methods Mater., vol. 63(5), pp. 360–68, 2016.10.1108/ACMM-10-2014-1452 ↗
18. N. Perez: Electrochemistry and Corrosion Science. Springer, New York, 2014.
19. COMSOL Multiphysics User Manual, Version 5.1. 2014.
20. K.B. Deshpande: Electrochimica Acta, 2011, vol. 56, pp. 1737-1745.10.1016/j.electacta.2010.09.044 ↗
21. F. Duarte, R. Gormaz, and S. Natesan: Computer Methods in Applied Mechanics and Engineering, 2004, vol. 193, pp. 4819-4836.10.1016/j.cma.2004.05.003 ↗
22. J. Donea, A. Huerta, J.P. Ponthot, and A. Rodriguez-Ferran: Encyclopedia of computational mechanics, 2004, vol. 1, pp. 1-25.
23. F.N. Afshar, J.H.W. De Wit, H. Terryn, and J.M.C. Mol: Electrochimica Acta, 2013, vol. 88, pp. 330-339.10.1016/j.electacta.2012.10.051 ↗
24. Gamry Instruments. Getting started with electrochemical corrosion measurement. Retrieved May 04, 2016, from http://www.gamry.com/application-notes/corrosion-coatings/basics-of-electrochemical-corrosion-measurements/.
25. Ferhat, M., Benchettara1, A., Amara, S., and Najjar, D. J. Mater. Environ. Sci., 2014, vol. 5, pp. 1059–68.
26. E. McCafferty: Introduction to Corrosion Science. Springer, New York, 2010, pp. 12–30.10.1007/978-1-4419-0455-3 ↗
27. S. Salleh: Modelling Pitting Corrosion in Carbon Steel Materials. [Dissertation]. Manchester, UK: The University of Manchester. Retrieved 20 March 2016.
28. D.E. Tallman, G. Spinks, A. Dominis, and G.G. Wallace: Journal of Solid State Electrochemistry, 2002, vol. 6, pp. 73-84.10.1007/s100080100212 ↗
29. R. Gašparac, and C.R. Martin: Journal of the Electrochemical Society, 2001, vol. 148, pp. 138-45.10.1149/1.1354615 ↗
30. B. Wessling: Advanced Materials, 1994, vol. 6, pp. 226-28.10.1002/adma.19940060309 ↗
31. P.J. Kinlen, V. Menon, and Y. Ding: Journal of the Electrochemical Society, 1999, vol. 146, pp. 3690-3695.10.1149/1.1392535 ↗
32. P. Chandrasekhar: Conducting Polymers, Fundamentals and Applications: A Practical Approach, Springer, New York, 2013.
33. G. Paliwoda-Porebska, M. Stratmann, M. Rohwerder, K. Potje-Kamloth, Y. Lu, A.Z. Pich and H.J. Adler: Corrosion science, 2005, vol. 47, pp. 3216-3233.10.1016/j.corsci.2005.05.057 ↗
34. R. Hasanov and S. Bilgiç: Progress in Organic Coatings, 2009, vol. 64, pp. 435-445.10.1016/j.porgcoat.2008.08.004 ↗