Microstructure and Texture of Electrodeposited Nanocrystalline Nickel in the As-Deposited State and After In-Situ and Ex-Situ Annealing
Source abstract
Abstract
The microstructure and texture characteristics of electrodeposited nanocrystalline nickel have been investigated in the present work. The material has been studied both in an as-received state and after in-situ and ex-situ annealing. The ASTAR automated crystal orientation mapping in a transmission electron microscope complemented by electron backscatter diffraction (EBSD) has been used in the investigation. The as-deposited material consisted of nanograins interspersed with coarser (sub)grain clusters, arranged in large mesoscale colonies and characterized by a dominant 〈001〉 fiber texture aligned with the deposition direction (DD). A large fraction of nanograin/cluster boundaries displayed a low-coincidence site lattice (low Σ) or twin character. The EBSD study confirmed the previously suggested presence of the “cobblestone”-type mesotexture, characterized by a local 〈001〉 fiber axis approximately perpendicular to the hemispherical growth surface of a mesoscale colony. The (sub)grain clusters contained low-angle boundaries and displayed large misorientation gradients; nevertheless, their orientations did not statistically differ from the surrounding nanograins. They did not serve as nuclei for the abnormal grain growth observed during annealing. The 〈001〉//DD to 〈111〉//DD fiber texture transition occurring during annealing did not result from the growth of pre-existing suitably oriented nuclei. Instead, copious twinning occurring along the migration front of the abnormally growing grains appeared to be primarily responsible for the above transition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Electrodeposition and Electroless Coatings · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. F. Dalla Torre, H. Van Swygenhoven, and M. Victoria: Acta Mater., 2002, vol. 50, pp. 3957-3970.10.1016/S1359-6454(02)00198-2 ↗
2. 2. K.S. Kumar, S. Suresh, M.F. Chisholm, J.A. Horton, and P. Wang: Acta Mater., 2003, vol. 51, pp. 387-405.10.1016/S1359-6454(02)00421-4 ↗
3. 3. K.S. Kumar, H. Van Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743-5774.10.1016/j.actamat.2003.08.032 ↗
4. 4. M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427-556.10.1016/j.pmatsci.2005.08.003 ↗
5. 5. M. Dao, L. Lu, R.J. Asaro, J.T.M. De Hosson, and E. Ma: Acta Mater., 2007, vol. 55, pp. 4041-4065.10.1016/j.actamat.2007.01.038 ↗
6. 6. U. Erb: Nanostruct. Mater., 1995, vol. 6, pp. 533-538.10.1016/0965-9773(95)00114-X ↗
7. 7. A.M. El-Sherik and U. Erb: J. Mater. Sci., 1995, vol. 30, pp. 5743-5749.10.1007/BF00356715 ↗
8. 8. B.Y.C. Wu, P.J. Ferreira, and C.A. Shuh: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1927-1936.10.1007/s11661-005-0056-9 ↗
9. 9. K. Schüler, B. Philippi, M. Weinmann, V.M. Marx, and H. Vehoff: Acta Mater., 2013, vol. 61, pp. 3945-3955.10.1016/j.actamat.2013.03.008 ↗
10. 10. S. Ruan and C.A. Schuh, Scripta Mater., 2008, vol. 59, pp. 1218-1221.10.1016/j.scriptamat.2008.08.010 ↗
11. 11. M.R. Barnett, P. Cizek, M. Nave, A. Sullivan, and R. Balasubramaniam: Scripta Mater., 2009, vol. 60, pp. 603-606.10.1016/j.scriptamat.2008.12.021 ↗
12. 12. P. Cizek, M.R. Barnett, M.D. Nave, E.F. Rauch, and R. Balasubramaniam: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2048-2060.10.1007/s11661-010-0583-x ↗
13. 13. U. Klement, U. Erb, and K.T. Aust: Nanostruct. Mater., 1995, vol. 6., pp. 581-584.10.1016/0965-9773(95)00125-5 ↗
14. 14. U. Klement, U. Erb, A.M. El-Sherik, and K.T. Aust: Mater. Sci. Eng., 1995, vol. A203, pp. 177-186.10.1016/0921-5093(95)09864-X ↗
15. 15. N. Wang, Z. Wang, K.T. Aust, and U. Erb: Acta Mater., 1997, vol. 45, pp. 1655-1669.10.1016/S1359-6454(96)00254-6 ↗
16. U. Klement and M. da Silva: J. Alloys Compd., 434-435, pp. 714-717.10.1016/j.jallcom.2006.08.118 ↗
17. 17. U. Klement, M. da Silva, and W. Skrotzki: J. Microsc., 2008, vol. 230, pp. 455-463.10.1111/j.1365-2818.2008.02005.x ↗
18. 18. G.D. Hibbard, V. Radmilovic, K.T. Aust, and U. Erb: Mater. Sci. Eng., 2008, vol. A494, pp. 232-238.10.1016/j.msea.2008.04.054 ↗
19. 19. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, United Kingdom, 2004.
20. 20. P. Cizek, A. Sankaran, E.F. Rauch, and M.R. Barnett: Scripta Mater., 2012, vol. 67, pp. 685-688.10.1016/j.scriptamat.2012.07.003 ↗
21. 21. F. Czerwinski, H. Li, M. Megret, J.A. Szpunar, D.G. Clark, and U. Erb: Scripta Mater., 1997, vol. 37, pp. 1967-1972.10.1016/S1359-6462(97)00390-4 ↗
22. 22. E.F. Rauch and L. Dupuy: Archives Metall. Mater., 2005, vol. 50, pp. 87-99.
23. 23. E.F. Rauch, J. Portillo, S. Nicolopoulos, D. Bultreys, S. Rouvimov, and P. Moeck: Z. Kristallogr., 2010, vol. 225, pp. 103-109.10.1524/zkri.2010.1205 ↗
24. 24. E.F. Rauch and M. Véron: Mater. Charact., 2014, vol. 98, pp. 1-9.10.1016/j.matchar.2014.08.010 ↗
25. 25. G. Gottstein and L.S. Shvindlerman: Grain Boundary Migration in Metals, 2nd ed., CRC Press, London, United Kingdom, 2010.
26. 26. C. Cayron: Acta Cryst., 2007, vol. A63, pp. 11-29.10.1107/S0108767306044291 ↗
27. 27. H.J. Bunge: Texture Analysis in Materials Science – Mathematical Methods, Butterworth, London, United Kingdom, 1982.
28. 28. O. Engler and V. Randle: Introduction to Texture Analysis – Macrotexture, Microtexture and Orientation Mapping, 2nd ed., CRC Press, Abingdon, United Kingdom, 2010.