journal article·2016-11

Effect of Grain Boundary Character Distribution on the Adiabatic Shear Susceptibility

Yang Yang, Lihong Jiang, Shuhong Luo, Haibo Hu, Tiegang Tang, Qingming Zhang

Publisher page

Abstract

The adiabatic shear susceptibility of AISI321 stainless steels with different grain boundary character distributions (GBCDs) was investigated by means of split-Hopkinson pressure bar. The results indicate that the width of the adiabatic shear band of the specimen after thermomechanical processing (TMP) treatment is narrower. The comparison of the stress collapse time, the critical stress, and the adiabatic shear forming energy suggests that the TMP specimens have lower adiabatic shear susceptibility than that of the solution-treated samples under the same loading condition. GBCD and grain size affected the adiabatic shear susceptibility. The high-angle boundary network of the TMP specimens was interrupted or replaced by the special grain boundary, and smaller grain size hindered the adiabatic shearing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. K. Sun, X.D. Yu, C.W. Tan, H. L. Ma, F.C. Wang and H.N. Cai: Mater. Sci. Eng. A, 2014, vol.595, pp 247–256.10.1016/j.msea.2013.12.007 ↗
2. Z.P. Wan, Y.E. Zhu, H.W. Liu and Y .Tang: Mater. Sci. Eng. A, 2012, vol.531, pp155-163.10.1016/j.msea.2011.10.050 ↗
3. Y. Yang, B.F. Wang, J. Xiong, Y. Zeng, Z. P. Chen and X. Y. Yang: Mater. Lett., 2006, vol.60, pp2198-2202.10.1016/j.matlet.2005.12.097 ↗
4. W. C. Lee, C.F. Lin, T. H. Chen and W. Z. Luo: J. Nucl. Mater., 2012, vol. 420, pp226–234.10.1016/j.jnucmat.2011.10.005 ↗
5. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Pérez-Prado and T.R. McNelley: Acta Mater., 2003, vol.51, pp 1307-1325.10.1016/S1359-6454(02)00526-8 ↗
6. B.F. Wang, Z.L. Liu, X.Y. Wang and Z.Z. Li: Mater. Sci. Eng. A, 2014, vol.610, pp301–308.10.1016/j.msea.2014.05.053 ↗
7. Q. Xue, X.Z. Liao, Y.T. Zhu and G.T. Gray III: Mater. Sci. Eng. A, 2005, vol.410, pp 252–256.10.1016/j.msea.2005.08.022 ↗
8. L.H. Dai, L.F. Liu and Y.L. Bai: Mater. Lett., 2004, vol.58, pp 1773-1776.10.1016/j.matlet.2003.10.050 ↗
9. J.X. Liu, S.K. Li, A.L. Fan and H.C. Sun: Mater. Sci. Eng. A 2008, vol. 487, pp 235-242.10.1016/j.msea.2007.10.012 ↗
10. Y. Yang, X.M. Li, X.L. Tong, Q.M. Zhang, C.Y. Xu: Mater. Sci. Eng. A, 2010, vol. 528, pp 3130-3133.10.1016/j.msea.2010.12.068 ↗
11. B.B. Singh, G. Sukumar, A. Bhattacharjee, K.S. Kumar, T.B. Bhat, A.K. Gogia: Mater Design, 2012, vol. 36, pp 640-649.10.1016/j.matdes.2011.11.030 ↗
12. Z.G. Wei, J.L. Yu, J.R. Li, Y.C. Li and S.S. Hu: Int. J. Impact Eng., 2001, vol.26, pp 843-852.10.1016/S0734-743X(01)00137-3 ↗
13. W.S. Lee, T.H.Chen and G.T. Lu: Mater. Sci. Tech., 2010, vol.26, pp 720-725.10.1179/026708309X12454008169384 ↗
14. X.Y. Wang, P.F. Yu, C. L. Tan: Mater. Sci. Tech., 2014, vol.30, pp 1966-1972.10.1179/1743284714Y.0000000617 ↗
15. B. D. Alexandreanua, B. H. Sencera, V. Thaveeprungsripornb and G.S. Was: Acta Mater.,2003, vol.51, pp3831-3848.10.1016/S1359-6454(03)00207-6 ↗
16. M. Shimada, H. Kokawa, Z. J. Wang, Y.S. Sato and I. Karibe: Acta Mater., 2002, vol.50, pp 2331-2341.10.1016/S1359-6454(02)00064-2 ↗
17. B.M. Guyot and N.L. Richards: Mater. Sci. Eng. A, 2005, vol.395, pp 87-97.10.1016/j.msea.2004.12.021 ↗
18. J.A. Hines and K.S. Vecchio: Acta Mater., 1997, vol.45, pp 635-649.10.1016/S1359-6454(96)00193-0 ↗
19. U. Andrade, M.A. Meyers, K.S. Vecchio and A.H. Chokshi: Acta Metall. Mater.,1994, vol.42, pp3183-3195.10.1016/0956-7151(94)90417-0 ↗
20. D. G. Brandon: Acta Metall.,1966,vol.14, pp 1479-1484.10.1016/0001-6160(66)90168-4 ↗
21. Q. Li, P. Zmudzki, S. Alameeri, M.N. Bassim: Mater. Sci. Tech., 2004, vol.20, pp676-678.10.1179/026708304225012099 ↗
22. S.P. Timothy and I.M. Hutchings: Acta Metall., 1985, vol.33, pp 667-676.10.1016/0001-6160(85)90030-6 ↗
23. M. El Wahabi, L. Gavard, J.M. Cabrera, J.M. Prado, F. Montheillet: Mater. Sci. Eng. A 2005, vol.393, pp 83–90.10.1016/j.msea.2004.09.064 ↗