journal article·2016-07

Influence of Processing Parameters on the Solidification Behavior of Single-Crystal CMSX-4 Superalloy

Fu Wang, Dexin Ma, Samuel Bogner, Andreas Bührig-Polaczek

Publisher page

Abstract

The microstructural evolution of a superalloy, single-crystal CMSX-4 solidified at different withdrawal rates was investigated using a directional solidification quenching method. Analyses of the cross-sections within mushy zones generated the evolution of the solid volume fractions (f s) during the reduction in the temperature and the solidification sequences. At the withdrawal rate of 0.3 mm min−1, f s increases by about 81 pct within the first 23 pct of the solidification interval, whereas it increases by about 64 pct at the withdrawal rate of 0.7 mm min−1. The Bower–Brody–Flemings model can characterize the evolution tendency of f s curve at the lower withdrawal rate, while it can not only describe the changing tendency of f s, but also precisely predict the f s values at higher withdrawal rate. With increasing withdrawal rate, the solidification intervals of the γ dendrite and γ/γ′ eutectics are increased. In addition to this, the forming site of the γ/γ′ eutectic at the lower withdrawal rate lags behind that at the higher withdrawal rate. At both the withdrawal rates the solidification of the γ/γ′ eutectic islands commences with the γ/γ′ core formed on the surface of the γ dendrites, then progressed spatially and developed the coarse γ/γ′ structure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. T.M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
2. A.J. Elliott, S. Tin, W.T. King, S.-C. Huang, M.F.X. Gigliotti, and T.M. Pollock: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3221–31.10.1007/s11661-004-0066-z ↗
3. A.J. Elliott and T.M. Pollock: Metall. Mater. Trans. A, 2007, vol. 38, pp. 871–82.10.1007/s11661-006-9085-2 ↗
4. N. D’Souza, J. Kelleher, C. Qiu, S.Y. Zhang, S. Gardner, R.E. Jones, D. Putman, and C. Panwisawas: Acta Mater., 2016, vol. 106, pp. 322–32.10.1016/j.actamat.2016.01.032 ↗
5. R.C. Reed: The superalloys fundamentals and applications, 1st edn. Cambridge University Press, New York, pp. 127–30 (2006).10.1017/CBO9780511541285 ↗
6. T.D. Anderson, J.N. Dpont, and T. Debroy: Acta Mater., 2010, vol. 58, pp. 1441–54.10.1016/j.actamat.2009.10.051 ↗
7. A.D. Cetel and D.N. Duhl: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 235–44.10.7449/1988/Superalloys_1988_235_244 ↗
8. G.L. Erickson: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 35–44.10.7449/1996/Superalloys_1996_35_44 ↗
9. X.P. Tan, J.L. Liu, T. Jin, Z.Q. Hu, H.U. Hong, B.G. Choi, I.S. Kim, C.Y. Jo, and D. Mangelinck: Mater. Sci. Eng. A, 2013, vol. 580, pp. 21–35.10.1016/j.msea.2013.05.028 ↗
10. D. Blavette, P. Caron, and T. Khan: Scripta Mater., 1986, vol. 20, pp. 1395–1400.10.1016/0036-9748(86)90103-1 ↗
11. A.C. Yeh and S. Tin: Scripta. Mater., 2005, vol. 52, pp. 519–24.10.1016/j.scriptamat.2004.10.039 ↗
12. A. Heckl, S. Neumeier, M. Göken, and R.F. Singer: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3435–44.10.1016/j.msea.2011.01.023 ↗
13. A.F. Giamei and D.L. Anton: Metall. Trans., 1985, vol. 16, pp. 1997–2005.10.1007/BF02662400 ↗
14. S. Neumeier, F. Pyczak, and M. Göken: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 109–19.
15. W.Z. Wang, T. Jin, J.L. Liu, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 479, pp. 148–56.10.1016/j.msea.2007.06.031 ↗
16. A. Mottura, N. Warnken, M.K. Miller, M.W. Finnis, and R.C. Reed: Acta Mater., 2010, vol. 58, pp. 931–42.10.1016/j.actamat.2009.10.008 ↗
17. N. D’Souza and H.B. Dong: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 261–69.
18. N. D’Souza, M. Lekstrom, H.J. Dai, B.A. Shollock, and H.B. Dong: Mater. Sci. Technol., 2007, vol. 23, pp. 1085–92.10.1179/174328407X213224 ↗
19. S.E. Seo, J.H. Lee, Y.S. Yoo, C.Y. JO, H. Miyahara, and K. Ogi: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3150–58.10.1007/s11661-011-0738-4 ↗
20. L. Zheng, C.Q. Gu, and Y.R. Zheng: Scripta Mater., 2004, vol. 50, pp. 435–9.10.1016/j.scriptamat.2003.11.009 ↗
21. N. D’Souza and H.B. Dong: Scripta Mater., 2007, vol. 56, pp. 41–44.10.1016/j.scriptamat.2006.08.060 ↗
22. H.T. Pang, H.B. Dong, R. Beanland, H.J. Stone, C.M.F. Rae, P.A. Midgley, G. Brewster, and N. D’Souza: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1660–9.10.1007/s11661-009-9855-8 ↗
23. A. Heckl, R. Rettig, S. Cenanovic, M. Göken, and R.F. Singer: J. Cryst. Growth, 2010, vol. 312, pp. 2137–44.10.1016/j.jcrysgro.2010.03.041 ↗
24. F. Wang, D. Ma, J. Zhang, S. Bogner, and A. Bührig-Polaczek: Mater. Character. 2015 101:20–25.10.1016/j.matchar.2015.01.003 ↗
25. F. Wang, D. Ma, J. Zhang, and A. Bührig-Polaczek: J. Alloy Compd. 2015, vol. 620, pp. 24–30.10.1016/j.jallcom.2014.09.103 ↗
26. W. Kurz and D.J. Fisher: Fundamentals of Solidification, 4th rev. ed., p. 83, Trans Tech Publications Ltd, Uetikon-Zuerich, 199810.4028/www.scientific.net/RC.35 ↗
27. A. Wagner, B.A. Shollock, and M. McLean: Mater. Sci. Eng. A, 2004, vol. 374, pp. 270–79.10.1016/j.msea.2004.03.017 ↗
28. D.M. Stefanescu: Science and engineering of casting solidification, 2nd rev. ed., p. 36, Springer, New York, 2009.
29. D. Ma and P.R. Sahm: Int. J. Mater. Res., 1996, vol. 87, pp. 640–4.10.1515/ijmr-1996-870807 ↗
30. D. Ma and U. Grafe: Int. J. Cast Met. Res., 2000, vol. 13, pp. 85–92.10.1080/13640461.2000.11819391 ↗
31. D. Ma and P.R. Sahm: Mater. Sci. Forum, 1996, vol. 215–216, pp. 223–8.10.4028/www.scientific.net/MSF.215-216.223 ↗
32. D. Ma and U. Grafe: Mater. Sci. Eng. A, 1999, vol. 270, pp. 339–42.10.1016/S0921-5093(99)00208-7 ↗
33. Z.X. Shi, J.X. Dong, M.C. Zhang, and L. Zheng: J. Alloy. Compd., 2013, vol. 571, pp. 168–77.10.1016/j.jallcom.2013.03.241 ↗
34. C. Walter, B. Hallstedt, and N. Warnken: Mater. Sci. Eng. A, 2005, vol. 397, pp. 385–90.10.1016/j.msea.2005.02.056 ↗
35. D. Ma and P. R. Sahm: Metall. Trans. A, 1992, vol. 23, pp. 3377–81.10.1007/BF03024545 ↗
36. X.Y. Zhu, S.N. Zhang, L.Y. Xu, J. Bi, Z.Q. Hu, and C.X. Shi: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 703−12.
37. S.M. Seo, J.H. Lee, Y.S. Yoo, C.Y. Jo, H. Miyahara, and K. Ogi: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 277–86.10.7449/2008/Superalloys_2008_277_286 ↗
38. F. Wang, D. Ma, and A. Bührig-Polaczek: Sci. Technol. Adv. Mater. 2015, 16:025004.10.1088/1468-6996/16/2/025004 ↗