journal article·2016-04

Improvement of Mechanical Properties of Spheroidized 1045 Steel by Induction Heat Treatment

Minwook Kim, Jung-Ho Shin, Young Choi, Seok-Jae Lee

Publisher page

Abstract

The effects of induction heat treatment on the formation of carbide particles and mechanical properties of spheroidized 1045 steel were investigated by means of microstructural analysis and tensile testing. The induction spheroidization accelerated the formation of spherical cementite particles and effectively softened the steel. The volume fraction of cementite was found to be a key factor that affected the mechanical properties of spheroidized steels. Further tests showed that sequential spheroidization by induction and furnace heat treatments enhanced elongation within a short spheroidization time, resulting in better mechanical properties. This was due to the higher volume fraction of spherical cementite particles that had less diffusion time for particle coarsening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Krauss G (2005) Steels-Processing, Structure, and Performance, ASM International, Materials Park, OH, pp 251-262.
2. Ratke L and Voorhees PW (2002) Growth and Coarsening—Ostwald Ripening in Material Processing. Springer, New York, NY, pp 117-166.
3. C.C. Chou, P.W. Kao, and G.H. Cheng: J. Mater. Sci., 1986, vol. 21, pp. 3339-3344.10.1007/BF00553377 ↗
4. A. Saha, D. Kumar Mondal, and J. Maity: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4001-4007.10.1016/j.msea.2010.03.003 ↗
5. A. Saha, D. Kumar Mondal, and J. Maity: J. Mater. Eng. Perform., 2011, vol. 20, pp. 114-119.10.1007/s11665-010-9653-x ↗
6. Z.Q. Lv, B. Wang, Z.H. Wang, S.H. Sun, and W.T. Fu: Mater. Sci. Eng. A, 2013, vol. 574, pp. 143-148.10.1016/j.msea.2013.02.059 ↗
7. S.E. Nam and D.N. Lee: J. Mater. Sci., 1987, vol. 22, pp. 2319-2326.10.1007/BF01082110 ↗
8. S.L. Zhang, X.J. Sun, and H. Dong: Mater. Sci. Eng. A, 2006, vol. 432, pp. 324-332.10.1016/j.msea.2006.06.057 ↗
9. W.Y. Guo, J. Li, and X.F. Jiang: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1003-1007.10.1007/s11665-011-9957-5 ↗
10. J. Arruabarrena, B. López, and J.M. Rodriguez-Ibabe: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 1470-1484.10.1007/s11661-013-2066-3 ↗
11. J.M. O’Brien and W.F. Hosford: J. Mater. Eng. Perform., 1997, vol. 6, pp. 69-72.10.1007/s11665-997-0034-z ↗
12. H.J. Li, B.Q. Wang, X.Y. Song, S.Z. Guo, and N.J. Gu: J. Iron Steel Res. Inter., 2006, vol. 13, pp. 9-13.10.1016/S1006-706X(06)60052-6 ↗
13. A. Karnyabi-Gol and M. Sheikh-Amid: J. Iron Steel Res. Inter., 2010, vol. 17, pp. 45-52.10.1016/S1006-706X(10)60085-4 ↗
14. H.L. Yi, Z.Y. Hou, Y.B. Xu, D. Wu, and G.D. Wang: Scr. Mater., 2012, vol. 67, pp. 645-648.10.1016/j.scriptamat.2012.07.020 ↗
15. W.J. Nam, D.S. Kim, and S.T. Ahn: J. Mater. Sci., 2003, vol. 38, pp. 3611-3617.10.1023/A:1025625330442 ↗
16. S.T. Ahn, D.S. Kim, and W.J. Nam: J. Mater. Proc. Tech., 2005, vol. 160, pp. 54-58.10.1016/j.jmatprotec.2004.03.019 ↗
17. J.B. Lee, N. Kang, J.T. Park, S.T. Ahn, Y.D. Park, I.D. Choi, K.R. Kim, and K.M. Cho, Mater. Chem. Phys., 2011, vol. 129, pp. 365-370.10.1016/j.matchemphys.2011.04.026 ↗
18. Z.J. Xie, Y.P. Fang, G. Han, H. Guo, R.D.K. Misra, and C.J. Shang: Mater. Sci. Eng. A, 2014, vol. 618, pp. 112-117.10.1016/j.msea.2014.08.072 ↗
19. C. Revilla, B. Lopez, and J.M. Rodriguez-Ibabe: Mater. Design, 2014, vol. 62, pp. 296-304.10.1016/j.matdes.2014.05.053 ↗
20. O. E. Atasoy and S. Ozbilen: J. Mater. Sci., 1989, vol. 24, pp. 281-287.10.1007/BF00660968 ↗
21. Z.L. Zhang, Y.N. Liu, J.W. Zhu, and G. Yu: Mater. Sci. Eng. A, 2008, vol. 483-484, pp. 64-66.10.1016/j.msea.2006.09.145 ↗
22. Y. Xiong, T. He, Z. Guo, H. He, F. Ren, and A.A.Volinsky: Mater. Sci. Eng. A, 2013, vol. 563, pp. 163-167.10.1016/j.msea.2012.11.068 ↗
23. Y.W. Lee, Y.I. Son, and S.J. Lee: Mater. Sci. Eng. A, 2013, vol. 585, pp. 94-99.10.1016/j.msea.2013.07.040 ↗
24. B. Soenen, A.K De, S. Vandeputte, and B.C. De Cooman: Acta Mater., 2004, vol. 52, pp. 3483-3492.10.1016/j.actamat.2004.03.046 ↗
25. Samsul Rizal and Hirromi Homma: Inter. J. Impact Eng., 2000, vol. 24, pp. 69-83.10.1016/S0734-743X(99)00029-9 ↗