journal article·2016-05

Formability of Friction Stir-Welded Blanks with Different Thickness Ratios

Sina Kolahgar, Morteza Ghaffarpour, Niloufar Habibi, Amir Hossein Kokabi, Abbas Akbarzadeh

Publisher page

Abstract

Welded sheets with different thicknesses are one of the interesting types of tailor-welded blanks (TWBs) that are widely used in metal-forming industries. In the present work, the formability behavior of different 1100-aluminum TWBs was studied. In this regard, the TWBs were made with different thickness ratios by using friction stir welding (FSW) at different welding rotational speeds (ω). The thickness ratios of 1.0, 1.3, and 1.7 were investigated where the thinner sheets had 1.5 mm thick for all conditions; i.e., the volume of welded material increased when the thickness ratio increased. Macrostructural observations, mechanical investigations, and sheet-forming limit tests were conducted. The results indicate that increasing ω leads to increasing the weld nugget size up to a maximum level and welding became impossible at higher ω. Furthermore, increasing heat input during FSW, the ultimate tensile strength of welds reduced in comparison with the initial cold-worked base metal. However, the ductility improved by increasing the heat input, which produced the sound welds. Formability studies of the friction stir-welded blanks with equal thicknesses have shown that the forming ratio improves up to 2.8 times the base metal. Forming limit curves also illustrate that increasing the thickness ratio of TWB causes the formability ratio to decrease steadily. Thus, when the thickness ratio becomes 1.7, the formability of TWB decreases approximately to the thinnest base metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Templesmith, and C.J. Dawes: International Patent Application No. PCT/GB92/02203, and Great Britain Patent Application No. 9125978.8, 1991.
2. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1-78.10.1016/j.mser.2005.07.001 ↗
3. C.J. Dawes and W.M. Thomas: Weld. J., 1996, vol. 75, pp. 41-5.
4. G. Çam and S. Mistikoglu: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1936-53.10.1007/s11665-014-0968-x ↗
5. A.A. Zadpoor, J. Sinke, R. Benedicus, and R. Pieters: Mater. Sci. Eng. A, 2008, vol. 494, pp. 281-90.10.1016/j.msea.2008.04.042 ↗
6. M. Ghaffarpour, B. Mollaei Dariani, A.H. Kokabi, and N.A. Razani: P. I. Mech. Eng. B-J. Eng., 2012, vol. 226, pp. 2013–22.10.1177/0954405412461864 ↗
7. M. Ghaffarpour, S. Kolahgar, B.M. Dariani, and K. Dehghani: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3697-3707.10.1007/s11661-013-1739-2 ↗
8. G. İpekoğlu and G. Çam: Metall. Mater. Trans. A, 2014, vol. 45, pp. 3074-87.10.1007/s11661-014-2248-7 ↗
9. M. Ghaffarpour, M. Kazemi, M.J. Mohammadi Sefat, A. Aziz, and K. Dehghani: Proc I Mech E Part L: J Materials: Des. Appl., 2015, DOI:10.1177/1464420715595652.10.1177/1464420715595652 ↗
10. P. Kannan, K. Balamurugan, and K. Thirunavukkarasu: Int. J. Adv. Manuf. Tech., 2015, doi:10.1007/s00170-015-7288-7.10.1007/s00170-015-7288-7 ↗
11. J. Shen, Y. Li, T. Zhang, D. Peng, D. Wang, and N. Xu: Sci. Technol. Weld. J., 2015, vol. 20, pp. 1-10.10.1179/1362171814Y.0000000248 ↗
12. A.A. Zadpoor, J. Sinke, and R. Benedictus: Int. J. Mater. Form., 2008, vol. 1, pp. 1311–14.10.1007/s12289-008-0144-7 ↗
13. A.A. Zadpoor, J. Sinke, and R. Benedictus: Mater. Des., 2009, vol. 30, pp. 1423-34.10.1016/j.matdes.2008.08.018 ↗
14. L. Fratini, G. Buffa, and R. Shivpuri: Mater. Sci. Eng. A, 2007, vol. 459, pp. 209-15.10.1016/j.msea.2007.01.041 ↗
15. G. Buffa, L. Fratini, and R. Shivpuri: Comput. Struct., 2008, vol. 28, pp. 181-9.10.1016/j.compstruc.2007.04.007 ↗
16. M.B. Silva, M. Skjoedt, P. Vilaca, N. Bay, and P.A.F. Martins: J. Mater. Process. Tech., 2009, vol. 209, pp. 811-20.10.1016/j.jmatprotec.2008.02.057 ↗
17. D.M. Rodrigues, A. Loureiro, C. Leitao, R.M. Leal, B.M. Chaparro, and P. Vilaca: Mater. Des., 2009, vol. 30, pp. 1913-21.10.1016/j.matdes.2008.09.016 ↗
18. A. Somasekharan and L. Murr: J. Mater. Sci., 2006, vol. 41, pp. 5365-70.10.1007/s10853-006-0342-y ↗
19. P.J. Reddy, S.V. Kailas, and T.S. Srivatsan: Adv. Mater. Res., 2012, vol. 410, pp. 196-205.10.4028/www.scientific.net/AMR.410.196 ↗
20. A. Giera, M. Merklein, and M. Geiger: Adv. Mater. Res., 2005, vol. 6, pp. 599-606.10.4028/www.scientific.net/AMR.6-8.599 ↗
21. T. Nishihara and Y. Nagasaka: Proc. of the 5th International Friction Stir Welding Symposium, Metz, France, 2004.
22. M. Miles, B. Decker, and T. Nelson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3461-8.10.1007/s11661-004-0183-8 ↗
23. T. Hirata, T. Oguri, H. Hagino, T. Tanaka, S.W. Chung, Y. Takigawa, and K. Higashi: Mater. Sci. Eng. A, 2007, vol. 456, pp. 344-9.10.1016/j.msea.2006.12.079 ↗
24. Y. Sato, Y. Sugiura, Y. Shoji, S. Park, H. Kokawa, and K. Ikeda: Mater. Sci. Eng. A, 2004, vol. 369, pp. 138-43.10.1016/j.msea.2003.11.035 ↗
25. H.R. Shercliff, M.J. Russell, A. Taylor, and T.L. Dickerson: Mec. Indust., 2005, vol. 6, pp. 25-35.10.1051/meca:2005004 ↗
26. M. Guerra, C. Schmidt, J.C. McClure, L.E. Murr, and A.C. Nunes: Mater. Charact., 2003, vol. 49, pp. 95-101.10.1016/S1044-5803(02)00362-5 ↗
27. Y.S. Sato, H. Kokawa, M. Enmoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2429-37.10.1007/s11661-999-0251-1 ↗
28. A.P. Reynolds: Sci. Technol. Weld. J., 2000, vol. 5, pp. 120-4.10.1179/136217100101538119 ↗
29. Ø. Frigaard, Ø. Grong, and O. Midling: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1189-200.10.1007/s11661-001-0128-4 ↗
30. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1801-3.10.1023/A:1018556332357 ↗
31. N. Saito, I. Shigematsu, T. Komaya, T. Tamaki, G. Yamauchi, and M. Nakamura: J. Mater. Sci. Lett., 2001, vol. 20, pp. 1913-5.10.1023/A:1012882413401 ↗
32. L.E. Murr: JMEPEG, 2010, vol. 19, pp. 1071-89.10.1007/s11665-010-9598-0 ↗
33. M.F. Shi, K.M. Pickett, and K.K. Bhatt: SAE Trans., 1993, Paper No. 930278.