Microstructure and Creep Behavior of Fe-27Al-1Nb Alloys with Added Carbon
Source abstract
Abstract
The effect of Nb and C additions on the phase composition, microstructure, and creep resistance of Fe3Al-type alloys is investigated. Two alloys, which contained (at. pct) (i) 27.6 Al, 1.15 Nb and 0.19 C (Fe balance) and (ii) 27.1 Al, 1.11 Nb, and 0.76 C (Fe balance), were studied in a temperature range from 873 K to 1073 K (600 °C to 800 °C). The carbide in both alloys was identified as Nb6C5. The creep data can be rationalized by introducing a threshold stress, below which, the creep rate is negligible. The threshold stress and an effective stress exponent were found simultaneously by a numerical method. Using the obtained values of the threshold stress, the activation energy of creep was determined to be 328 kJ/mol. The effective stress exponent varied from 2.0 to 3.1. A breakdown of power-law behavior was observed at higher stresses. The transition occurred at the normalized creep rate of $$ \dot{\varepsilon }/D = 1013 \,{\text{m}} - 2 $$ , which agrees with the rule suggested by Sherby and Burke and the diffusion coefficient D corresponding to the diffusion of Al in Fe-Al.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. N.S. Stoloff: Mater. Sci. Eng. A, 1998, vol. 258, pp. 1-14.10.1016/S0921-5093(98)00909-5 ↗
2. F. Stein, A. Schneider and G. Frommeyer: Intermetallics. 2003, vol. 11, pp. 71-82.10.1016/S0966-9795(02)00187-5 ↗
3. L. Anthony and B. Fultz: Acta Metall. Mater., 1995, vol. 43, pp. 3885-3891.10.1016/0956-7151(95)90171-X ↗
4. M. Palm: J. Alloys Compd., 2009, vol. 475, pp. 173-177.10.1016/j.jallcom.2008.07.036 ↗
5. R. Balasubramaniam: J. Alloys Compd., 1997, vol. 253–254, pp. 148-51.10.1016/S0925-8388(96)02940-4 ↗
6. C.G. McKamey, P.J. Maziasz and J.W. Jones: J. Mater. Res., 1992, vol. 7, pp. 2089-2106.10.1557/JMR.1992.2089 ↗
7. C.G. McKamey, P.J. Maziasz, G.M. Goodwin and T. Zacharia: Mater. Sci. Eng. A, 1994, vol. 174, pp. 59-70.10.1016/0921-5093(94)91112-6 ↗
8. C.G. McKamey and P.J. Maziasz: Intermetallics, 1998, vol. 6, pp. 303-314.10.1016/S0966-9795(97)00104-0 ↗
9. D.G. Morris, M.A. Muñoz-Morris and C. Baudin: Acta Mater., 2004, vol. 52, pp. 2827-2836.10.1016/j.actamat.2004.02.031 ↗
10. D.G. Morris, M.A. Muñoz-Morris, L.M. Requejo and C. Baudin: Intermetallics, 2006, vol. 14, pp. 1204-1207.10.1016/j.intermet.2005.10.015 ↗
11. D.G. Morris, L.M. Requejo and M.A. Muñoz-Morris: Scripta Mater., 2006, vol. 54, pp. 393-397.10.1016/j.scriptamat.2005.10.022 ↗
12. D.G. Morris and M.A. Muñoz-Morris: Mater. Sci. Eng. A, 2012, vol. 552, pp. 134-144.10.1016/j.msea.2012.05.022 ↗
13. R.G. Baligidad: J. Mater. Sci., 2004, vol. 39, pp. 5599-5602.10.1023/B:JMSC.0000039298.29397.3a ↗
14. R.G. Baligidad: Mat. Sci. Eng. A, 2004, vol. 368, pp. 131-138.10.1016/j.msea.2003.10.243 ↗
15. X.Q. Yu and Y.S. Sun: J. Mater. Sci. Lett., 2001, vol. 20, pp. 1221-1223.10.1023/A:1010974806977 ↗
16. Z.H. Zhang, Y.S. Sun and J. Guo: Scripta Metall. Mater., 1995, vol. 33, pp. 2013-2017.10.1016/0956-716X(95)00437-Z ↗
17. S. Milenkovic and M. Palm: Intermetallics, 2008, vol. 16, 1212-1218.10.1016/j.intermet.2008.07.007 ↗
18. L. Falat, A. Schneider, G. Sauthoff and G. Frommeyer: Intermetallics, 2005, vol. 13, pp. 1256-62.10.1016/j.intermet.2004.05.010 ↗
19. F. Dobeš: Key Eng. Mater., 2011, vol. 465, pp. 443-446.10.4028/www.scientific.net/KEM.465.443 ↗
20. F. Dobeš: Acta Metal. Slovaca, 2010, vol. 16, pp. 223-228.
21. D. Connetable, J. Lacaze, P. Maugis and B. Sundman: Computer Coupling of Phase Diagrams and Thermochemistry, 2008, vol. 32, pp. 361–370.10.1016/j.calphad.2008.01.002 ↗
22. F. Stein and M. Palm: Int. J. Mater. Res., 2007, vol. 98, pp. 580-588.10.3139/146.101512 ↗
23. T.R. Bieler and A.K. Mukherjee: Mater. Sci. Eng. A, 1990, vol. 128, pp. 171-182.10.1016/0921-5093(90)90225-R ↗
24. F.A. Mohamed, K.T. Park and E.J. Lavernia: Mater. Sci.Eng. A, 1992, vol. 150, pp. 21-35.10.1016/0921-5093(90)90004-M ↗
25. R.S. Mishra, T.R. Bieler and A.K. Mukherjee: Acta Metall. Mater., 1995, vol. 43, pp. 877-891.10.1016/0956-7151(94)00323-A ↗
26. K.-T. Park, E.J. Lavernia and F.A. Mohamed: Acta Metall. Mater., 1990, vol. 38, pp. 2149-2159.10.1016/0956-7151(90)90082-R ↗
27. G. Gonzáles-Doncel and O.D. Sherby: Acta Metall. Mater., 1993, vol. 41, pp. 2797-2805.10.1016/0956-7151(93)90094-9 ↗
28. J. Čadek, H. Oikawa and V. Šustek: Mater. Sci. Eng. A, 1995, vol. 190. pp. 9-23.10.1016/0921-5093(94)09605-V ↗
29. Y. Li and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3937-3948.10.1016/S1359-6454(98)00073-1 ↗
30. A. Arieli and A.K. Mukherjee: Creep and Fracture of Engineering Materials and Structures, B. Wilshire and D.R.J. Owen, eds., Pineridge Press, Swansea, 1981, pp. 97–111.
31. O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1967, vol. 13, pp. 325-390.
32. M. Eggersmann and H. Mehrer: Phil. Mag. A, 2000, vol. A80, pp. 1219-1244.10.1080/01418610008212112 ↗
33. L.N. Larikov, V.V. Geichenko, and V.M. Falchenko: Diffusion Processes in Ordered Alloys, Amerind Publishing Co, New Delhi, 1981.
34. D.G. Morris, M.A. Muñoz-Morris and L.M. Requejo: Acta Mater., 2006, vol. 54, pp. 2335-2341.10.1016/j.actamat.2006.01.008 ↗
35. U. Reimann and G. Sauthoff: Intermetallics, 1999, vol. 7, pp. 437-445.10.1016/S0966-9795(98)00104-6 ↗
36. A. Schneider, L. Falat, G. Sauthoff and G. Frommeyer: Intermetallics, 2003, vol. 11, pp. 443-450.10.1016/S0966-9795(03)00018-9 ↗