Modeling the Effect of Active Fiber Cooling on the Microstructure of Fiber-Reinforced Metal Matrix Composites
Source abstract
Abstract
A modified pressure infiltration process was recently developed to synthesize carbon-fiber-reinforced aluminum matrix composites. In the modified process, the ends of carbon fibers are extended out of the crucible to induce selective cooling. The process is found to be effective in improving the quality of composites. The present work is focused on determining the effect of the induced conductive heat transfer on the composite system through numerical methods. Due to the axisymmetry of the system, a two-dimensional (2-D) model is studied that can be expanded into three dimensions. The variables in this transient analysis include the fiber radius, fiber length, and melt superheat temperature. The results show that the composite system can be tailored to have a temperature on the fiber surface that is lower than the melt, to promote nucleation on the fiber surface. It is also observed that there is a point of inflection in the temperature profile along the particle/melt interface at which there is no temperature gradient in the radial direction. The information about the inflection point can be used to control the diffusion of solute atoms in the system. The result can be used in determining the optimum fiber volume fraction in metal matrix composite (MMC) materials to obtain the desired microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. N. Chawla and K.K. Chawla: Metal Matrix Composites, Springer-Verlag, New York, NY, 2005, pp. 351–80.
2. P.K. Rohatgi, N. Gupta, and A. Daoud: ASM Handbook, vol. 15, Casting, ASM, Materials Park, OH, 2008, pp. 1149–64.10.31399/asm.hb.v15.a0005339 ↗
3. W. Deqing, S. Ziyan, G. Hon, and H.F. Lopez: J. Mater. Synth. Process., 2001, vol. 9, pp. 247–51.10.1023/A:1015526217424 ↗
4. C.W. Chien, S.L. Lee, J.C. Lin, and M.T. Jahn: Mater. Lett., 2002, vol. 52, pp. 334–41.10.1016/S0167-577X(01)00418-9 ↗
5. M. Thünemann, O. Beffort, S. Kleiner, and U. Vogt: Compos. Sci. Technol., 2007, vol. 67, pp. 2377–83.10.1016/j.compscitech.2007.01.001 ↗
6. P. Rohatgi, V. Tiwari, and N. Gupta: J. Mater. Sci., 2006, vol. 41, pp. 7232–39.10.1007/s10853-006-0915-9 ↗
7. H.G. Seong, H.F. Lopez, D.P. Robertson, and P.K. Rohatgi: Mater. Sci. Eng., A, 2008, vol. 487, pp. 201–09.10.1016/j.msea.2007.10.081 ↗
8. H.G. Seong, H.F. Lopez, and P.K. Rohatgi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 138–49.10.1007/s11661-006-9030-4 ↗
9. A. Daoud: Mater. Sci. Eng., A, 2005, vol. 391, pp. 114–20.10.1016/j.msea.2004.08.075 ↗
10. A. Daoud: Mater. Lett., 2004, vol. 58, pp. 3206–13.10.1016/j.matlet.2004.06.012 ↗
11. T. Matsunaga, K. Matsuda, T. Hatayama, K. Shinozaki, and M. Yoshida: Compos. Part A, 2007, vol. 38, pp. 1902–11.10.1016/j.compositesa.2007.03.007 ↗
12. Y. Xia, Y. Wang, Y. Zhou, and S. Jeelani: Mater. Lett., 2007, vol. 61, pp. 213–15.10.1016/j.matlet.2006.04.043 ↗
13. D.B. Miracle and B. Maruyama: National Space Missile Mater. Symp., Dayton, OH, 2000.
14. S. Rawal: JOM, 2001, vol. 53, pp. 14–17.10.1007/s11837-001-0139-z ↗
15. D. Maijer, Y. Gao, P. Lee, T. Lindley, and T. Fukui: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3275–88.10.1007/s11661-004-0070-3 ↗
16. H.G. Seong, H.F. Lopez, M. Gajdardziska-Josifovska, and P.K. Rohatgi: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2796–2804.10.1007/s11661-007-9316-1 ↗
17. E.-K. Lee, R. Amano, and P. Rohatgi: Heat Mass Transfer., 2007, vol. 43, pp. 741–48.10.1007/s00231-005-0057-7 ↗
18. T.P.D. Rajan, K. Narayan Prabhu, R.M. Pillai, and B.C. Pai: Compos. Sci. Technol., 2007, vol. 67, pp. 70–78.10.1016/j.compscitech.2006.03.028 ↗
19. A.-E.M. Assar and M.D.A. Al-Nimr: J. Compos. Mater., 1994, vol. 28, pp. 1480–90.10.1177/002199839402801506 ↗
20. T. Dopler, A. Modaressi, and V. Michaud: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 225–34.10.1007/s11663-000-0041-z ↗
21. J.A. Sekhar and R. Trivedi: Mater. Sci. Eng., A, 1989, vol. 114, pp. 133–46.10.1016/0921-5093(89)90852-6 ↗
22. T.D. Papathanasiou: J. Mater. Sci. Lett., 1996, vol. 15, pp. 1507–09.10.1007/BF00625006 ↗
23. S. Atkins and J. Gibeling: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3067–79.10.1007/BF02669437 ↗
24. F.P. Incropera, D.P. DeWitt, T.L. Bergman, and A.S. Lavine: Fundamentals of Heat and Mass Transfer, 6th ed., John Wiley & Sons, New York, NY, 2007, p. 390.
25. G.E. Myers: Analytical Methods in Conduction Heat Transfer, 2nd ed., AMCHT Publications, Madison, WI, 1998, p. 130.
26. M.N. Ozisik: Boundary Value Problems of Heat Conduction, International Textbook Company, Scranton, PA, 1968, pp. 137–48.