journal article·2014-09

Microstructure Development, Nanomechanical, and Dynamic Compression Properties of Spark Plasma Sintered TiB2-Ti-Based Homogeneous and Bi-layered Composites

Neha Gupta, Venkitanarayanan Parameswaran, Bikramjit Basu

Publisher page

Abstract

The growing threats due to increased use of small-caliber armor piercing projectiles demand the development of new light-weight body armor materials. In this context, TiB2 appears to be a promising ceramic material. However, poor sinterability and low fracture toughness remain two major issues for TiB2. In order to address these issues together, Ti as a sinter-aid is used to develop TiB2-(x wt pct Ti), (x = 10, 20) homogeneous composites and a bi-layered composite (BLC) with each layer having Ti content of 10 and 20 wt pct. The present study uniquely demonstrates the efficacy of two-stage spark plasma sintering route to develop dense TiB2-Ti composites with an excellent combination of nanoscale hardness (~36 GPa) and indentation fracture toughness (~12 MPa m1/2). In case of BLC, these properties are not compromised w.r.t. homogeneous composites, suggesting the retention of baseline material properties even in the bi-layer design due to optimal relief of residual stresses. The better indentation toughness of TiB2-(10 wt pct Ti) and TiB2-(20 wt pct Ti) composites can be attributed to the observed crack deflection/arrest, indicating better damage tolerance. Transmission electron microscope investigation reveals the presence of dense dislocation networks and deformation twins in α-Ti at the grain boundaries and triple pockets, surrounded by TiB2 grains. The dynamic strength of around 4 GPa has been measured using Split Hopkinson Pressure Bar tests in a reproducible manner at strain rates of the order of 600 s−1. The damage progression under high strain rate has been investigated by acquiring real time images for the entire test duration using ultra-high speed imaging. An attempt has been made to establish microstructure-property correlation and a simple analysis based on Mohr–Coulomb theory is used to rationalize the measured strength properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. B. Basu, K. Balani: Advanced structural ceramics, John Wiley & Sons Inc., USA, 2011.10.1002/9781118037300 ↗
2. G. Subhash, S. Maiti, P.H. Geubelle, and D. Ghosh: J. Am. Ceram. Soc., 2008, vol. 91, pp. 2777.10.1111/j.1551-2916.2008.02624.x ↗
3. C.A. Tarry: United States, Patent No. 5443917, 22 Aug 1995.
4. T.J. Holmquist, A.M. Rajendran, D.W. Templeton, and K.D. Bishnoi: “A Ceramic Armour Database,” TARDEC Technical Report, Jan 1999.
5. K. S. Kumar, M. S. DiPietro: Scripta Metallurgica et Materialia, 1995, vol. 32(5), pp. 793-798.10.1016/0956-716X(95)91605-O ↗
6. V. Madhu, K. Ramanjaneyulu, T. Balakrishna Bhat, N. K. Gupta: International Journal of Impact Engineering, 2005, vol. 32(1-4), pp. 337-350.10.1016/j.ijimpeng.2005.03.004 ↗
7. B. Basu, G. B. Raju, A. K. Suri: International Materials Reviews, 2006, vol. 51(6), pp. 352-374.10.1179/174328006X102529 ↗
8. S. Baik, P. K. Becher: Journal of American Ceramic Society, 1987, vol. 70(8), pp. 527-530.10.1111/j.1151-2916.1987.tb05699.x ↗
9. T. S. R. Ch. Murthy, B. Basu, R. Balasubramaniam, A. K. Suri, C. Subramanian, R. K. Foteda: Journal of American Ceramic Society, 2006, vol 89(1), pp.131-138.10.1111/j.1551-2916.2005.00652.x ↗
10. W. Wang, Z. Fu, H. Wang, R. Yuan: Journal of European Ceramic Society, 2002, vol. 22, pp.1045-1049.10.1016/S0955-2219(01)00424-1 ↗
11. M. K. Ferber, P. F. Becher, C. B. Finch: Journal of American Ceramic Society, 1983, vol. 66(1), pp.C2-C4.10.1111/j.1151-2916.1983.tb09974.x ↗
12. Z. H. Zhang, F. C. Wang, L. Wang, S. K. Li: Materials Science and Engineering A, 2008, vol. 476(1-2), pp.201-205.10.1016/j.msea.2007.04.107 ↗
13. Z. H. Zhang, F. C. Wang, S. K. Lee, Y. Liu, J. W. Cheng, Y. Liang: Materials Science and Engineering A, 2009, vol. 523(1-2), pp. 134-138.10.1016/j.msea.2009.07.016 ↗
14. G. D. Zhan, J. Kuntz, J. Wan, J. Garay, A. K. Mukherjee: Journal of American Ceramic Society, 2003, vol 86(1), pp. 200-202.10.1111/j.1151-2916.2003.tb03306.x ↗
15. B. Basu, J.H. Lee, and D.Y. Kim: J. Am. Ceram. Soc., 2004, vol. 87(9), pp. 1771–74.10.1111/j.1551-2916.2004.01771.x ↗
16. Z. A. Munir, U. Anselmi-Tamburini, M. Ohyanagi: Journal of Materials Science, 2006, vol. 41, pp. 763-777.10.1007/s10853-006-6555-2 ↗
17. T. Venkateswaran, B. Basu, G.B. Raju, and D.Y Kim: J. Eur. Ceram. Soc., 2006, vol. 26, pp. 2431–40.10.1016/j.jeurceramsoc.2005.05.011 ↗
18. D. V. Dudina, D. M. Hulbert, D. Jiang, C. Unuvar, S. J. Cytron, A. K. Mukherjee: Journal of Materials Science, 2008, vol. 43(10), pp. 3569-3576.10.1007/s10853-008-2563-8 ↗
19. B. Li, Y. Liu, H. Cao, L. He, J. Li: Journal of Materials Science, 2009, vol. 44(14), pp. 3909-3912.10.1007/s10853-009-3527-3 ↗
20. N. Gupta, V. V. Bhanu Prasad, V. Madhu, B. Basu: Defence Science Journal, 2012, vol. 62, pp. 381-389.
21. D. A. Hoke, M. A. Meyers, L. W. Meyer, G. T. Gray III: Metallurgical Transactions A, 1992, vol. 23, pp. 77-86.10.1007/BF02660855 ↗
22. D. Zhu, G. Wu, G. Chen, Q. Zhang: Materials Science and Engineering A, 2008, vol. 487, pp. 536-540.10.1016/j.msea.2007.10.037 ↗
23. A. Kidane, A. Shukla: Journal of Materials Science, 2008, vol. 43, pp. 2771-2777.10.1007/s10853-008-2520-6 ↗
24. N. Gupta, A. Mukhopadhyay, K. Pavani, B. Basu: Materials Science and Engineering A, 2012, vol. 534, pp. 111-118.10.1016/j.msea.2011.11.048 ↗
25. W. C. Oliver, G. M. Pharr: Journal of Materials Research, 1992, vol. 7, pp. 1564-1583.10.1557/JMR.1992.1564 ↗
26. L. Prchlik: Journal of Materials Science, 2004, vol 39(4), pp.1185-1193.10.1023/B:JMSC.0000013874.41039.55 ↗
27. G. R. Anstis, P. Chantikul, B. R. Lawn, D. B. Marshall: Journal of American Ceramic Society, 1981, vol. 64(9), pp. 533-538.10.1111/j.1151-2916.1981.tb10320.x ↗
28. G. Subhash and G. Ravichandran: Split Hopkinson Pressure Bar Testing of Ceramics, ASM Handbook, Mechanical Testing and Evaluation, vol. 8, ASM International, Materials Park, 2000, pp. 497–504.
29. Y. Li, K. T. Ramesh, E. S. C. Chin: International Journal of Solids Structure, 2001, vol. 38, pp. 6045-6061.10.1016/S0020-7683(00)00364-4 ↗
30. K. F. Graff: Experimental studies in longitudinal waves: Wave motion in elastic solids, pp 130-132, Dover Publications INC., New York, 1975.
31. G.B. Raju and B. Basu: J. Am. Ceram. Soc., 2007, vol. 90(11), pp. 3415–23.10.1111/j.1551-2916.2007.01911.x ↗
32. D. Jain, K. M. Reddy, A. Mukhopadhyay, B. Basu: Material Science and Engineering A, 2010, vol. 528, pp. 200-207.10.1016/j.msea.2010.09.022 ↗
33. K. M. Reddy, N. Kumar, B. Basu; Scripta Materialia, 2010, vol. 62, pp.435-438.10.1016/j.scriptamat.2009.11.030 ↗
34. K. M. Reddy, A. Mukhopadhyay, B. Basu: Journal of European Ceramic Society, 2010, vol. 30, pp. 3363-3375.10.1016/j.jeurceramsoc.2010.08.005 ↗
35. S. Nakane, Y. Takano, M. Yoshinaka, K. Hirota, O. Yamaguchi: Journal of American Ceramic Society, 1999, vol. 82(6), pp.1627-1628.10.1111/j.1151-2916.1999.tb01975.x ↗
36. M. Eriksson, D. Salamon, M. Nygren, Z. J. Shen: Materials Science and Engineering A, 2008, vol. 475(1-2), pp. 101-104.10.1016/j.msea.2007.01.161 ↗
37. J. L. Murray, P. K. Liao, K. E. Spear: Bulletin of alloy phase diagrams, 1986, vol. 7(6), pp. 550-555.10.1007/BF02869864 ↗
38. M. Masanta, S. M. Shariff, A. R. Choudhury: Materials science and engineering A, 2011, vol. 528(16-17), pp. 5327-5335.10.1016/j.msea.2011.03.057 ↗
39. H. Wang, K. T. Ramesh: Acta Materialia, 2004, vol. 52, pp. 355-367.10.1016/j.actamat.2003.09.036 ↗
40. H. Horii, S. Nemat Nassar: Journal of Geophysical Research, 1985, vol. 90, pp. 3105-3125.10.1029/JB090iB04p03105 ↗
41. W. Chen, G. Ravichandran: International Journal of Fracture, 2000, vol. 101, pp. 141-159.10.1023/A:1007672422700 ↗
42. G. Hu, C. Q. Chen, K. T. Ramesh, J. W. McCauley: Scripta Materialia, 2012, vol. 66, pp. 527-530.10.1016/j.scriptamat.2011.12.037 ↗
43. K. Biswas, A.S. Sharma, and B. Basu: Scripta Mater., 2013, vol. 69(2), pp. 122–26.10.1016/j.scriptamat.2013.02.046 ↗
44. A. G. Evans, K. T. Faber: Journal of American Ceramic Society, 1981, vol. 64(7), pp. 394-398.10.1111/j.1151-2916.1981.tb09877.x ↗
45. M. Taya, S. Hayashi, A. S. Kobayashi, H. S. Yoon: Journal of American Ceramic Society, 1990, vol. 73(5), pp. 1382-1391.10.1111/j.1151-2916.1990.tb05209.x ↗
46. K. T. Faber, A. G. Evans: Acta Metallurgica et Materailia, 1983, vol. 31(4), pp. 565-576.10.1016/0001-6160(83)90046-9 ↗
47. R. G. Munro: Journal of Research of National Institute of Standards and Technology, 2000, vol. 105(5), pp. 709-720.10.6028/jres.105.057 ↗
48. Q. Li, Y. B. Xu, M. N. Bassim: Journal of Materials Processing Technology, 2004, vol. 155-156, pp. 1889-1892.10.1016/j.jmatprotec.2004.04.327 ↗
49. M. H. Sadd: Elasticity: Theory, Applications and Numerics, Elsevier Academic Presss, New York, 2005.
50. A.R. Khoei: Computational Plasticity in Powder Forming Process, Elsevier, Amsterdam, 2005, pp. 449.
51. M. Yu: Appl. Mech. Rev., 2002, vol. 55, pp. 129–69.10.1115/1.1472455 ↗
52. B. Basu, M. Kalin: Tribology of ceramics and composites, John Wiley & Sons Inc., New Jersey, 2011.10.1002/9781118021668 ↗