Oxygen Permeation of Partly Molten Slags
Source abstract
Abstract
The conductivities, oxygen ion transference numbers, and oxygen permeation fluxes of NiO-30, 36, 42, and 48 wt pct Bi2O3, In2O3-30, 36, 42, and 48 wt pct Bi2O3, ZnO-15, 20, 25, and 30 wt pct Bi2O3, ZrV2O7-16, 20, 24, and 28 wt pct V2O5, and BiVO4-5, 7, 10, and 12 wt pct V2O5 partly molten slags have been measured by using the four-probe DC, volumetric measurements of the faradaic efficiency, and gas flow techniques, respectively, under various temperatures and oxygen partial pressure gradients. Results indicate that in the ranges of slag layer thicknesses 1 to 5 mm and temperatures 923 K to 1173 K (650 °C to 900 °C), used in the present study, the overall oxygen permeation kinetics is controlled by both chemical diffusion and surface exchange reactions. The oxygen permeation fluxes (3 × 10−9 to 9 × 10−8 mol/cm2 s) were found to increase with volume fraction of liquid. The oxygen ion transference number was found to be in the range 0.2 to 0.8. The ambipolar conductivity, characteristic thickness, and surface exchange coefficient were estimated to be in the ranges 1.1 × 10−3 to 2.3 × 10−1 S/cm, 2 × 10−2 to 7 × 10−2 cm, and 1.3 × 10−6 to 2.1 × 10−6 cm/s, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. L. Leontiev, V. Boronenkov, M. Zinigrad, E. Pastukhov, M. Shalimov, and S. Shanshurov: Phase Interaction in the Metal - Oxide Melts - Gas Systems: The Modelling of Structure, Properties and Processes, Springer, 2011.
2. R. Boom, S. Riaz, Y. Xiao, and K.C. Mills: Steel Research International, 2013, vol. 84, pp. 623-630.10.1002/srin.201200201 ↗
3. V.V. Belousov and A.A. Klimashin: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3715-3723.10.1007/s11661-012-1173-x ↗
4. V.V. Belousov and A.A. Klimashin: Russ. Chem. Rev., 2013, vol. 82, pp. 273-288.10.1070/RC2013v082n03ABEH004343 ↗
5. A.A. Klimashin and V.V. Belousov: Corros. Sci., 2011, vol. 53, pp. 3150-3155.10.1016/j.corsci.2011.05.058 ↗
6. A.A. Klimashin and V.V. Belousov: Oxid. Met., 2011, vol. 76, pp. 359-366.10.1007/s11085-011-9260-8 ↗
7. V.V. Belousov: Russ. J. Phys. Chem. A, 2008, vol. 82, pp. 79-85.10.1134/S0036024408130153 ↗
8. V.V. Belousov: Oxid. Metal., 2007, vol. 67, pp. 235-250.10.1007/s11085-007-9054-1 ↗
9. V.V. Belousov and S.V. Fedorov: Russ. Chem. Rev., 2012, vol. 81, pp. 44-64.10.1070/RC2012v081n01ABEH004209 ↗
10. C. Xia, Y. Li, Y. Tian, Q. Liu, Y. Zhao, L. Jia, and Y. Li: J. Power Sources, 2009, vol. 188, pp. 156–62.10.1016/j.jpowsour.2008.11.068 ↗
11. W. Zhu, C. Xia, D. Ding, X. Shi, and G. Meng: Mater. Res. Bull., 2006, vol. 41, pp. 2057-2064.10.1016/j.materresbull.2006.04.001 ↗
12. V.V. Belousov: JETP Letters, 2008, vol. 88, pp. 259-260.10.1134/S0021364008160078 ↗
13. A. Chandra and J. Maier: Solid State Ionics, 2002, vol. 148, pp. 153-158.10.1016/S0167-2738(02)00110-8 ↗
14. V.V. Belousov: J. Eur. Ceram. Soc., 2007, vol. 27, pp. 3459-3467.10.1016/j.jeurceramsoc.2007.01.014 ↗
15. F.D. Richardson: Canadian Metallurgical Quarterly, 1982, vol. 21, pp. 111-119.10.1179/cmq.1982.21.2.111 ↗
16. P.N. Quested and B. J. Monaghan: High Temp. Mater. Proces., 2011, vol. 20, pp. 219-234.10.1515/HTMP.2001.20.3-4.219 ↗
17. S.L. Schiefelbein and D.R. Sadoway: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 1141-1149.10.1007/s11663-997-0070-y ↗
18. U.B. Pal: JOM, 2002, 11, pp. 57-61.10.1007/BF02709752 ↗
19. V.V. Belousov: Russ. J. Electrochem. 1995, vol. 31, pp. 1240-1244.
20. V.V. Belousov: J. Am. Ceram. Soc. 1996, vol. 79, pp. 1703-1706.10.1111/j.1151-2916.1996.tb08789.x ↗
21. N.V. Lyskov, Yu.G. Metlin, V.V. Belousov, and Yu.D. Tretyakov. Solid State Ionics, 2004, vol. 166, pp. 207-212.10.1016/j.ssi.2003.10.008 ↗
22. S.V. Fedorov, V.V. Belousov, and A.V. Vorobiev: J. Electrochem. Soc., 2008, vol. 155, pp. F241-F244.10.1149/1.2990701 ↗
23. V.V. Belousov, S.V. Fedorov, and A.V. Vorobiev: J. Electrochem. Soc., 2011, vol. 158, pp. B601-B604.10.1149/1.3561425 ↗
24. I.V. Kulbakin, V.V. Belousov, V.A. Schelkunov, S.V. Fedorov, and A.V. Vorobiev: Mater. Lett., 2012, vol. 67, pp. 139–41.10.1016/j.matlet.2011.09.034 ↗
25. I.V. Kulbakin, S.V. Fedorov, A.V. Vorobiev, and V.V. Belousov: Russ. J. Electrochem., 2013, vol. 49, pp. 878–82.10.1134/S1023193513090085 ↗
26. V.V. Belousov: J. Mater. Sci., 2005, vol. 40, pp. 2361-2365.10.1007/s10853-005-1959-y ↗
27. V.V. Belousov: Colloid. J., 2004, vol. 66, pp. 149-155.10.1023/B:COLL.0000023110.23942.6c ↗
28. T. Bak, J, Nowotny, M. Rekas, C.C. Sorrell, and P.A. Banda: J. Mater. Sci., 2002, vol. 13, pp. 571-579.
29. J. Feinleib and D. Adler: Phys. Rev. Letters 1968, vol. 21, pp. 1010-1013.10.1103/PhysRevLett.21.1010 ↗
30. H.A. Harwig, and A.G. Gerards: J. Solid State Chem. 1978, vol. 26, pp. 265-274.10.1016/0022-4596(78)90161-5 ↗
31. P. D. Battle, C.P.A. Gatlow, J. Drennan, and A.D. Murry: J. Phys. C, 1983, vol. 16, pp. L561-L566.10.1088/0022-3719/16/17/003 ↗
32. S. Hull: Rep. Prog. Phys. 2004, vol. 67, pp. 1233-1255.10.1088/0034-4885/67/7/R05 ↗
33. H.A. Harwig and A.G. Gerards: Thermochim. Acta, 1979, vol. 28, pp. 121-131.10.1016/0040-6031(79)87011-2 ↗
34. H.J.M. Bouwmeester, H. Kruidhof, and A.J. Burggraaf: Solid State Ionics, 1994, vol. 72, pp. 185-194.10.1016/0167-2738(94)90145-7 ↗
35. V.V. Belousov: MRS Commun., 2013, vol. 3, pp. 225-233.10.1557/mrc.2013.41 ↗
36. V.A. Yurkov: JETP, 1952, vol. 22, pp. 223-229.
37. O.A. Esin and V.L. Zyazev: Russ. J. Inorg. Chem., 1957, vol. 2, pp. 1998-2002.
38. V.I. Musykhin, E.A. Pastukhov, N.A. Vatolin, and E.M. Lepynskih: Inorg. Mater., 1971. vol. 7, pp. 99-102.