journal article·2010-07

Solid-Liquid Interface Energy between Silicon Crystal and Silicon-Aluminum Melt

Zengyun Jian, Xiaoqin Yang, Fange Chang, Wanqi Jie

Publisher page

Abstract

By examining the surface morphologies of undercooled Si-20 at. pct Al alloy during and after the solidification process, it is determined that the critical undercooling for silicon to grow from lateral mode to intermediary mode ΔT* and that from intermediary mode to continuous mode ΔT** are 131 and 239 K, respectively. A method that predicts the solid-liquid interface energy of binary lateral growth materials on the basis of ΔT* and ΔT** has been developed. Formulas between the physical parameters and the solid-liquid interface energy have been obtained. The interface energy between silicon crystal and Si-Al melt predicted from ΔT* is almost equal to that from ΔT**. The present results of the solid-liquid interface energy predicted according to ΔT* and ΔT** obtained in Si-20 at. pct Al alloy are in very good agreement with the reported results of the grain-boundary method and the critical undercooling method from ΔT* and ΔT** obtained in pure silicon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. D. Turnbull: J. Appl. Phys., 1950, vol. 21, pp. 1022–27.10.1063/1.1699435 ↗
2. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974, pp. 290–327.
3. Z.Y. Jian, K. Kuribayashi, and W.Q. Jie: Acta Mater., 2004, vol. 52, pp. 3323–33.10.1016/j.actamat.2004.03.027 ↗
4. K.A. Jackson: Mater. Sci. Eng., 1984, vol. 65, pp. 7–13.10.1016/0025-5416(84)90194-0 ↗
5. I. Steinbach: Acta Mater., 2008, vol. 56, pp. 4965–71.10.1016/j.actamat.2008.06.009 ↗
6. A. Das and E.J. Mittemeijer: Z. Metallkd., 2002, vol. 93, pp. 459–67.10.3139/146.020459 ↗
7. S.R. Stiffler, M.O. Thompson, and P.S. Peercy: Phys. Rev. Lett., 1988, vol. 60, pp. 2519–22.10.1103/PhysRevLett.60.2519 ↗
8. Z.Y. Jian and W.Q. Jie: Metall. Mater. Trans. A, 2001, vol. 31A, pp. 391–95.10.1007/s11661-001-0270-z ↗
9. M. Gündüz and J.D. Hunt: Acta Metall., 1985, vol. 33, pp. 1651–72.10.1016/0001-6160(85)90161-0 ↗
10. M. Gündüz and J.D. Hunt: Acta Metall., 1988, vol. 37, pp. 1839–45.10.1016/0001-6160(89)90068-0 ↗
11. K. Keslioglu and N. Marasli: Mater. Sci. Eng. A, 2004, vol. 369, pp. 294–301.10.1016/j.msea.2003.11.033 ↗
12. M. Erol, N. Marasli, K. Keslioglu, and M. Gündüz: Scripta Mater., 2004, vol. 51, pp. 131–36.10.1016/j.scriptamat.2004.03.041 ↗
13. K. Kesliogu, M. Erol, N. Marasli, and M. Gündüz: J. Alloys Compd., 2004, vol. 385, pp. 207–13.10.1016/j.jallcom.2004.05.010 ↗
14. U. Böyük, S. Engin, and N. Marasli: J. Alloys Compd., 2009, vol. 476, pp. 213–19.10.1016/j.jallcom.2008.09.073 ↗
15. F. Meydaneri, B. Saatçi, M. Gündüz, and M. Ozdemir: Surf. Sci., 2007, vol. 601, pp. 2171–77.10.1016/j.susc.2007.03.007 ↗
16. N. Marasli and J.D. Hunt: Acta Mater., 1996, vol. 44, pp. 1085–96.10.1016/1359-6454(95)00227-8 ↗
17. K. Keslioglu, M. Gündüz, H. Kaya, and E. Cadirli: Mater. Lett., 2004, vol. 58, pp. 3067–73.10.1016/j.matlet.2004.05.044 ↗
18. K. Mondal, A. Kumar, G. Gupta, and B.S. Murty: Acta Metall., 2009, vol. 57, pp. 3422–30.
19. L.A. Wilen and J.G. Dash: Science, 1995, vol. 270, pp. 1184–86.10.1126/science.270.5239.1184 ↗
20. S.C. Hardy: Phil. Mag., 1977, vol. 35, pp. 471–84.10.1080/14786437708237066 ↗
21. F. Spaepen and R.B. Meyer: Scripta Metall., 1976, vol. 10, pp. 257–63.10.1016/0036-9748(76)90374-4 ↗
22. B. Bayender, N. Maraslı, E. Cadırlı, and M. Gündüz: Mater. Sci. Eng. A, 1999, vol. 270, pp. 343–48.10.1016/S0921-5093(99)00162-8 ↗
23. N. Maraslı, K. Keslioglu, and B. Arslan: J. Cryst. Growth, 2003, vol. 247, pp. 613–22.10.1016/S0022-0248(02)02057-2 ↗
24. U. Böyük, K. Keslioglu, M. Erol, and N. Maraslı: Mater. Lett., 2005, vol. 59, pp. 2953–58.10.1016/j.matlet.2005.03.071 ↗
25. Y. Ocak, S. Akbulut, U. Böyük, M. Erol, K. Keslioglu, and N. Marasli: Scripta Mater., 2006, vol. 55, pp. 235–38.10.1016/j.scriptamat.2006.04.007 ↗
26. Z.Y. Jian, K. Kuribayashi, and W.Q. Jie: Acta Mater., 2006, vol. 54, pp. 3227–32.10.1016/j.actamat.2006.03.009 ↗
27. T. Aoyama, Y. Takamura, and K. Kuribayashi: Acta Mater. Metall., 2000, vol. 48, pp. 3739–44.10.1016/S1359-6454(00)00164-6 ↗
28. Z.Y. Jian, K. Nagashio, and K. Kuribayashi: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2947–53.10.1007/s11661-002-0279-y ↗
29. E.T. Turkdogen: Physical Chemistry of High Temperature Technology, Academic Press, New York, NY, 1980, pp. 61–115.
30. R.L. David: CRC Handbook of Chemistry of Chemistry and Physics, CRC Press, Boca Raton, FL, 1989, pp. B2–B220.