journal article·2012-08

The Effect of Aluminum Additions on the Microstructure and Thermomechanical Behavior of NiTiZr Shape-Memory Alloys

Derek Hsen Dai Hsu, Taisuke T. Sasaki, Gregory B. Thompson, Michele V. Manuel

Publisher page

Abstract

The microstructure, thermal cycling, and mechanical behavior of Ni48.5Ti31.5−x Zr20Al x (x = 0, 1, 2, 3) alloys were studied in the solution-treated and aged condition using microscopy techniques, differential scanning calorimetry, and compression tests. The microscopy techniques used include optical, scanning, and transmission electron microscopy, and three-dimensional, atom–probe microscopy. The results of this study indicated a strong dependence of the transformation behavior on alloy chemistry and thermal cycling. The aluminum additions served to decrease transformation behaviors from 351 K to 596 K (78 °C to 323 °C) and reduce thermal stability. Additionally, aluminum was shown to increase the plateau stress in the aged condition, whereas the formation of coarse-grained intermetallic phases caused the embrittlement of the microstructure, reducing its ductility. The addition of Al resulted in the refinement of the coarse, lenticular precipitates identified as Ni4(Ti,Zr)3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. K. Otsuka and X.B. Ren: Intermetallics, 1999, vol. 7, pp. 511–28.10.1016/S0966-9795(98)00070-3 ↗
2. G.B. Kauffman and I. Mayo: Chem. Educ., 1996, vol. 2, pp. 1–21.10.1007/s00897960057a ↗
3. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗
4. S.F. Hsieh and S.K. Wu: Mater. Charact., 1998, vol. 41, pp. 151–62.10.1016/S1044-5803(98)00032-1 ↗
5. Z.W. Feng, B.D. Gao, J.B. Wang, D.F. Qian, and Y.X. Liu: Mater. Sci. Forum, 2002, vols. 394–395, pp. 365–68.10.4028/www.scientific.net/MSF.394-395.365 ↗
6. S.F. Hsieh and S.K. Wu: J. Alloys Compd., 1998, vol. 266, pp. 276–82.10.1016/S0925-8388(97)00448-9 ↗
7. K.H. Eckelmeyer: Scr. Metall., 1976, vol. 10, pp. 667–72.10.1016/0036-9748(76)90339-2 ↗
8. S.F. Hsieh and S.K. Wu: J. Mater. Sci., 1997, vol. 32, pp. 989–96.10.1023/A:1018522204751 ↗
9. K. Oh-ishi, Z. Horita, and M. Nemoto: Mater. Trans., Jpn. Inst. Met. (JIM), 1997, vol. 38, pp. 99–106.10.2320/matertrans1989.38.99 ↗
10. L.J. Meng, Y. Li, X.Q. Zhao, J. Xu, and H.B. Xu: Intermetallics, 2007, vol. 15, pp. 814–18.10.1016/j.intermet.2006.10.038 ↗
11. J. Jung, G. Ghosh, and G.B. Olson: Acta Mater., 2003, vol. 51, pp. 6341–57.10.1016/j.actamat.2003.08.003 ↗
12. J. Jung: Ph.D. Dissertation, Northwestern University, Evanston, IL, 2003.
13. M.D. Bender: Ph.D. Dissertation, Northwestern University, Evanston, IL, 2008.
14. O. Rios, R. Noebe, T. Biles, A. Garg, A. Palczer, D. Scheiman, H.J. Seifert, and M. Kaufman: Proc. Soc. Photo-Opt. Instrum. Eng. (SPIE)—Smart Struct. Mater., 2005, vol. 5761, pp. 376–87.
15. J. Inczédy, T. Lengyel, and A.M. Ure: Compendium of Analytical Nomenclature: Definitive Rules 1997, 3rd ed., Blackwell Science, Osney Mead, Oxford, U.K.,1998, pp. 7–8.
16. S.D. Han, W.H. Zou, S. Jin, Z. Zhang, and D.H. Yang: Scripta Metall. Mater., 1995, vol. 32, pp. 1441–46.10.1016/0956-716X(95)00185-X ↗
17. K. Thompson, D. Lawrence, D.J. Larson, J.D. Olson, T.F. Kelly, and B. Gorman: Ultramicroscopy, 2007, vol. 107, pp. 131–39.10.1016/j.ultramic.2006.06.008 ↗
18. M.K. Miller, K.F. Russell, and G.B. Thompson: Ultramicroscopy, 2005, vol. 102, pp. 287–98.10.1016/j.ultramic.2004.10.011 ↗
19. L.A. Giannuzzi and F.A. Stevie: Micron, 1999, vol. 30, pp. 197–204.10.1016/S0968-4328(99)00005-0 ↗
20. S.K. Wu and S.F. Hsieh: J. Alloys Compd., 2000, vol. 297, pp. 294–302.10.1016/S0925-8388(99)00604-0 ↗
21. K. Otsuka and C.M. Wayman: Shape Memory Materials, 1st ed., Cambridge University Press, Cambridge, U.K., 1998, pp. 68–71.
22. S. Miyazaki, Y. Igo, and K. Otsuka: Acta Metall., 1986, vol. 34, pp. 2045–51.10.1016/0001-6160(86)90263-4 ↗
23. K. Gall, H. Sehitoglu, Y.I. Chumlyakov, I.V. Kireeva, and H.J. Maier: J. Eng. Mater. Technol.—Trans. Am. Soc. Mech. Eng. (ASME), 1999, vol. 121, pp. 19–27.10.1115/1.2815993 ↗
24. K. Gall, and H. Maier: Acta Mater., 2002, vol. 50, pp. 4643–57.10.1016/S1359-6454(02)00315-4 ↗
25. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler: Acta Mater., 2002, vol. 50, pp. 4255–74.10.1016/S1359-6454(02)00257-4 ↗
26. C.V. Howard and M.G. Reed: Unbiased Stereology: Three-Dimensional Measurement in Microscopy, 1st ed., BIOS Scientific Publishers/Springer, New York, NY, 1998, pp. 55–57.
27. M.D. Bender and G.B. Olson: Proc. Int. Conf. Martensitic Transform. (ICOMAT'08), TMS, Warrendale, PA, 2010, pp.159–66.
28. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, 2nd ed., Cambridge University Press, New York, NY, 2009, pp. 341–44.
29. A.M. Sandu, K. Tsuchiya, S. Yamamoto, Y. Todaka, and M. Umemoto: Scripta Mater., 2006, vol. 55, pp. 1079–82.10.1016/j.scriptamat.2006.08.033 ↗
30. J.W. Martin: Concise Encyclopedia of the Structure of Materials, 1st ed., Elsevier, Amsterdam, the Netherlands 2007, pp. 243–46.