journal article·2013-12Open access

Distortion Analysis in the Manufacturing of Cold-Drawn and Induction-Hardened Components

Thomas Georg Karl Hirsch, Alexandre da Silva Rocha, Rafael Menezes Nunes

Abstract

In this investigation, a design of experiments analysis of distortion for a typical manufacturing process involving pre-straightening, cold drawing, and induction hardening of AISI 1045 cylindrical steel bars was carried out. A careful characterization of the material, including residual stress states and geometrical changes, was done for the different manufacturing steps. In order to identify effects and correlations on distortion behavior, the investigated variables included the batch influence, the combined drawing process itself with two different drawing angles and two different polishing and straightening (P.S.) angles, a stress relief treatment which was applied to a part of the samples, and finally induction hardening with two different surface hardening depths. Main and statistically significant effects on the distortion of the induction-hardened samples were found to be in this order: first, the interaction between the drawing angle and batch, then the interaction between drawing angles, and finally drawing angle and induction hardened layer. It was also found that the distortion potentials are transmitted from the drawing process to further manufacturing steps and, consequently, from one production site to the next.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. F. Hoffmann, O. Kessler, T. Lubben and P. Mayr, Heat Treat Met-Uk 2004, vol. 31, pp. 27-30.
2. H. W. Zoch, Materialwiss Werkst 2012, vol. 43, pp. 9-15.10.1002/mawe.201100881 ↗
3. K. D. Thoben, D. Klein, M. Seifert and T. Wuest, Materialwiss Werkst 2012, vol. 43, pp. 178-185.10.1002/mawe.201100907 ↗
4. H. L. Yu, J. W. Kang and T. Y. Huang, Sci China Technol Sc 2011, vol. 54, pp. 81-87.10.1007/s11431-010-4211-1 ↗
5. H. W. Zoch, Materialwiss Werkst 2006, vol. 37, pp. 6-10.10.1002/mawe.200500958 ↗
6. T. Kuboki, H. Yoshikawa, Y. Neishi, K. Kuroda and M. Akiyama, Ironmak Steelmak 2001, vol. 28, pp. 117-121.10.1179/030192301678028 ↗
7. A. S. Rocha, R. M. Nunes and T. Hirsch, P I Mech Eng B-J Eng 2012, vol. 226, pp. 459-465.10.1177/0954405411422299 ↗
8. H. Surm, O. Kessler, F. Hoffmann and P. Mayr, Int J Mater Prod Tec 2005, vol. 24, pp. 270-281.10.1504/IJMPT.2005.007954 ↗
9. F. Frerichs, D. Landek, T. Lubben, F. Hoffmann and H. W. Zoch, Materialwiss Werkst 2006, vol. 37, pp. 63-68.10.1002/mawe.200500974 ↗
10. J. Epp, T. Hirsch, M. Hunkel and R. Wimpory, Mechanical Stress Evaluation by Neutrons and Synchrotron Radiation 2010, vol. 652, pp. 37-43.10.4028/www.scientific.net/MSF.652.37 ↗
11. J. M. Atienza and M. Elices, Mater Struct 2004, vol. 37, pp. 301-304.10.1007/BF02481675 ↗
12. J. M. Atienza and M. Elices, Mater Struct 2003, vol. 36, pp. 548-552.10.1007/BF02480832 ↗
13. M. L. Martinez-Perez, F. J. Mompean, J. Ruiz-Hervias, C. R. Borlado, J. M. Atienza, M. Garcia-Hernandez, M. Elices, J. Gil-Sevillano, R. L. Peng and T. Buslaps, Acta Mater 2004, vol. 52, pp. 5303-5313.10.1016/j.actamat.2004.07.036 ↗
14. K. Tanaka and Y. Akiniwa, Jsme Int J a-Solid M 2004, vol. 47, pp. 252-263.10.1299/jsmea.47.252 ↗
15. T. Poeste, R.C. Wimpory, and R. Schneider: Mater. Sci. Forum, 2006, vol. 524–525, pp. 223–28.10.4028/www.scientific.net/MSF.524-525.223 ↗
16. M. R. Ripoll, S. M. Weygand and H. Riedel, Mat Sci Eng a-Struct 2010, vol. 527, pp. 3064-3072.10.1016/j.msea.2010.01.079 ↗
17. M. Moore, W. Evans, SAE Tech P 1958, vol. 66, pp. 340–345.
18. J. Epp and T. Hirsch, Materialwiss Werkst 2012, vol. 43, pp. 112-119.10.1002/mawe.201100897 ↗
19. J. Epp, H. Surm, J. Kovac, T. Hirsch and F. Hoffmann, Metall Mater Trans A 2011, vol. 42A, pp. 1205-1214.10.1007/s11661-010-0528-4 ↗