journal article·2013-05

Experimental and Thermokinetic Simulation Studies on the Formation of Deleterious Zones in Dissimilar Ferritic Steel Weldments

R. Anand, C. Sudha, S. Saroja, M. Vijayalakshmi

Publisher page

Abstract

The methods to predict and prevent the formation of hard and soft zones in dissimilar weldments of 9Cr-1Mo and 2¼Cr-1Mo ferritic steels during high-temperature exposure are examined in this article. The computational studies have been carried out using multicomponent diffusion model incorporated in Dictra and validated by experimental methods using EPMA and TEM. Carbon concentration profiles across the interface of the weld joint between the two ferritic steels were simulated in the temperatures ranging from 823 K to 1023 K (from 550 °C to 750 °C) for various time durations using “diffusion in dispersed phase model” in Dictra. When precipitation and diffusion were incorporated into the calculations simultaneously, the agreement was better between the calculated and the experimentally measured values of carbon concentration profiles, type, and volume fractions of carbides in the hard zone and diffusion zone, width, and the activation energy. Calculation results of thermodynamic potentials of carbon in 2¼Cr-1Mo and 9Cr-1Mo steels suggested that the diffusion is driven by the activity gradient of carbon across the joint. The effectiveness of nickel-based diffusion barrier in suppressing the formation of hard and soft zones is demonstrated using calculations based on the cell model incorporated in Dictra.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, S.L. Mannan and D.H. Sastry: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 115-24.10.1007/s11661-001-0107-9 ↗
2. H. Cerjak, P. Hofer and B. Schaffernak: ISIJ International, 1999, vol. 39(9), pp. 874-88.10.2355/isijinternational.39.874 ↗
3. B.C. Kim, H.S. Ann, and J.T. Song: in Proceedings of International Trends in Welding Science and Technology, ASM International, Materials Park, OH, 1992, pp. 307–15.
4. L. Beres, A. Balogh, W. Irmer and C.S. Kirk: Welding J., 2003, vol. 82, pp. 330-36.
5. S.K. Albert, T.P.S. Gill, A.K. Tyagi, S.L. Mannan, S.D. Kulkarni and P. Rodriguez: Welding J., 1997, vol. 76, pp. 135-42.
6. R. Foret, B. Zlamal and J. Sopousek: Welding J., 2006, vol. 85, pp. 211-17.
7. J. Soupousek and R. Foret: Sci. Technol. Weld Join., 2008, vol. 13(1), pp. 17-24.10.1179/174329307X213918 ↗
8. C. Sudha, A.L.E. Terrance, S.K. Albert and M. Vijayalakshmi: J. Nucl. Mater., 2002, vol. 302, pp. 193-205.10.1016/S0022-3115(02)00777-8 ↗
9. C.D. Lundin, K.K. Khan and D. Yang: WRC Bull., 1996, vol. 407, pp. 1-49.
10. C. Sudha, V. Thomas Paul, A.L.E. Terrrance, S. Saroja and M. Vijayalakshmi: Welding J., 2006, vol. 85, pp. 71-80.
11. R. Anand, C. Sudha, T. Karthikeyan, A.L.E. Terrance, S. Saroja and M. Vijayalakshmi: J. Mater. Sci., 2009, vol. 44, pp. 257-65.10.1007/s10853-008-3052-9 ↗
12. E. Kozeschnik, P. Polt, S. Brett and B. Buchmayr: Sci. Technol. Weld. Join., 2002, vol.7(2), pp. 63-68.10.1179/136217102225003005 ↗
13. E. Kozeschnik, P. Warbichler, I. Letofsky-Papst, S. Brett and B. Buchmayr: Sci. Technol. Weld. Join., 2002, vol. 7, pp. 69-76.10.1179/136217102225003014 ↗
14. E. Kozeschnik and B. Buchmayr: Mathematical Modeling of Weld Phenomena 5, Materials Modeling Series, IOM Communication Ltd, London, 2001, pp. 349-61.
15. E. Kozeschnik, P. PÖlt, P. Warbichler, I. Letofshy-Papst, S. Brett and B. Buchmayr: Mathematical Modeling of Weld Phenomena 6, Materials Modeling Series, Maney Publishing, London, 2002, pp. 323-36.
16. B. Buchmayr: Mathematical Modeling of Weld Phenomena, The Institute of Materials, London, 1993, pp. 227-40.
17. T. Helander, H.C.M. Andersson and M. Oskarsson: Mater. High Temp., 2000, vol. 17, pp. 389-96.10.3184/096034000783640721 ↗
18. A. EngstrÖm, L. HÖglund and J. Ǻgren: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1127-34.10.1007/BF02652288 ↗
19. B. Buchmayr and J. S. Kirkaldy: Fundamentals and Applications of Ternary Diffusion, Pergamon Press, New York, 1990, pp. 164-72.10.1016/B978-0-08-040412-7.50024-4 ↗
20. J.O. Anderson, L. Hoglund, B. Jonsson, and J. Agren: Fundamentals and Applications of Ternary Diffusion, Pergamon Press, New York, 1990, pp. 153–62.
21. A. Borgenstam, A. EngstrÖm, L. Höglund and J. Ǻgren: J. Phase Equilibria., 2000, vol. 21, pp. 269-80.10.1361/105497100770340057 ↗
22. J.O. Anderson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
23. J. Kucera, J. Vrestal and K Stránský: Defect Diffus. Forum, 1989, vol. 66-69, pp. 1389–94.
24. F. Gauzzi and S. Missori, J. Mater. Sci., 1988, vol. 23, pp. 782-89.10.1007/BF01153967 ↗
25. B.J. Lee: CALPHAD, 1993, vol. 17, pp. 251-68.10.1016/0364-5916(93)90004-U ↗
26. B.J. Lee: CALPHAD, 1992, vol. 16, pp. 121-49.10.1016/0364-5916(92)90002-F ↗
27. J.O. Andersson and N. Lange: Metall. Trans. A, 1988, vol. 19A, pp. 1385-94.10.1007/BF02674012 ↗
28. J.O. Andersson: CALPHAD, 1988, vol. 12, pp. 9-23.10.1016/0364-5916(88)90025-9 ↗
29. M. Hillert and C. Qiu: J. Phase Equilib. Diffus., 1992, vol. 13(5), pp. 512-21.10.1007/BF02665764 ↗
30. A. Gabriel, P. Gustafson and I. Ansara: CALPHAD, 1987, vol. 11, pp. 203-18.10.1016/0364-5916(87)90039-3 ↗
31. K. Frisk: Metall. Trans. A, 1992, vol. 23A, pp. 639-49.10.1007/BF02801181 ↗
32. M. Hillert and C. Qiu: Metall. Trans. A, 1992, vol. 23A, pp. 1593-96.10.1007/BF02647341 ↗
33. K. Laha, K. Bhanu Sankara Rao and S.L. Mannan: Mater. Sci. Eng., 1990, vol. A129, pp. 183-95.10.1016/0921-5093(90)90265-5 ↗
34. M. Vijayalakshmi, S. Saroja, V. Thomas Paul, R. Mythili and V.S. Raghunathan: Metall. Mater. Trans. A, 1999, vol. 31A, pp. 161-74.10.1007/s11661-999-0204-8 ↗
35. C. Sudha, R. Anand, S. Saroja and M. Vijayalakshmi: Trans. IIM, 2010, vol. 63(4), pp. 739-44.
36. K. Takeda, K. Yamashita, Y. Murata, T. Koyama and M. Morinaga: Mater. Trans., 2008, vol. 49(3), pp. 479-83.10.2320/matertrans.MBW200706 ↗
37. L. Bornstein: Diffusion in Solids, Metals and Alloys, Springer, Germany, 1990.
38. P. Parameswaran, M. Vijayalakshmi, P. Shankar and V.S. Raghunathan: J. Mater. Sci., 1992, vol. 28(20), pp. 5426-34.10.1007/BF00367811 ↗
39. B. Senior, F.W. Noble and B.L. Eyre: Acta Metall. Mater., 1988, vol. 36(7), pp. 1855-62.10.1016/0001-6160(88)90253-2 ↗
40. Y. Jin: Metall. Trans., 1989, vol. 20A, pp. 1561-63.
41. R. Anand, C. Sudha, T. Karthikeyan, A.L.E. Terrance, S. Saroja and M. Vijayalakshmi, Trans. IIM, 2008, vol. 61(6), pp. 483-86.
42. R. Anand, C. Sudha, V. Thomas Paul, S. Saroja and M. Vijayalakshmi: Welding J., 2010, vol. 89, pp. 65-74.