Fracture Mechanics of Rubber Epoxy Composites
Source abstract
Abstract
The effect of the addition of rubber micro-particles to epoxy matrix on the mechanical properties and the fracture toughness were investigated. Rubber epoxy composites were prepared with different weight percentages namely, 0, 5, 10, 15, 20, 25, 30 wt pct of rubber. Both quasi-static and dynamic ultrasonic measurements of the elastic modulus were found to decrease by 60 pct, and the critical value of the stress intensity factors was found to increase by approximately 45 pct for the rubber epoxy composites. This was also confirmed with the finite element analysis that had the same increasing trend. The fracture surface morphology reveals rough cleavage fracture in the epoxy matrix with brittle intergranular decohesion caused by the impurity segregation that exhibits relatively high micro-roughness of the fracture surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. S. Sivashanker, S. O. Osiyemi, and Asim Bag. Metall. Mater. Trans. A, Vol. 34A, pp. 1396-1400, 2003, DOI: 10.1007/s11661-003-0252-4.10.1007/s11661-003-0252-4 ↗
2. JG. Rao, and S. Ankem. Metall. Mater. Trans. A, Vol. 27A, pp. 2366–73, 1996, DOI: 10.1007/BF02651891.10.1007/BF02651891 ↗
3. R. Kamiya, and T-W Chou. Metall. Mater. Trans. A, Vol. 31A, pp. 899–909, 2000, DOI: 10.1007/s11661-000-1009-y.10.1007/s11661-000-1009-y ↗
4. Ferranti Jr, Louis, and Naresh N. Thadhani. Metall. Mater. Trans. A, Vol. 38, pp. 2697–2715, 2007, DOI: 10.1007/s11661-007-9272-9.10.1007/s11661-007-9272-9 ↗
5. R.C. Laible, and F.J. McGarry. Polym. Plastics Technol. Eng., Vol. 7, No. 1, pp. 27–47, (1976), DOI: 10.1080/03602557608063109.10.1080/03602557608063109 ↗
6. B.J.P. Jansen, K.Y. Tamminga, H.E.H. Meijer, and P.J. Lemstra. Polymer, Vol. 40(20), pp. 5601–607, 1999, DOI: 10.1016/S0032-3861(98)00774-5.10.1016/S0032-3861(98)00774-5 ↗
7. K Yamanaka, Y Takagi, and T Inoue. Polymer, Vol. 30, No. 10, pp. 1839–44, (1989), DOI: 10.1016/0032-3861(89)90355-8.10.1016/0032-3861(89)90355-8 ↗
8. D. Ratna, A. K. Banthia, and P. C. Deb. J. Appl. Polym. Sci., Vol. 78, No. 4, pp. 716–23, 2000, DOI: 10.1002/1097-4628(20001024)78:4.10.1002/1097-4628(20001024)78:4<716::AID-APP40>3.0.CO;2-B ↗
9. Ignazio Blanco, Gianluca Cicala, Carmelo Lo Faro, and Antonio Recca. J. Appl. Polym. Sci., Vol. 89, No. 1, pp. 268–73, 2003, DOI: 10.1002/app.12179.10.1002/app.12179 ↗
10. PM. Lipic, FS. Bates, and MA. Hillmyer. J. Am. Chem. Soc., Vol. 120, No. 35, pp. 8963–70, 1998, DOI: 10.1021/ja981544s.10.1021/ja981544s ↗
11. Marc A. Hillmyer, Paul M. Lipic, Damian A. Hajduk, Kristoffer Almdal, and Frank S. Bates. J. Am. Chem. Soc., Vol. 119, No. 11, pp. 2749–50, 1997, DOI: 10.1021/ja963622m.10.1021/ja963622m ↗
12. Julie Y. Qian, Raymond A. Pearson, Victoria L. Dimonie, and Mohamed S. El‐Aasser. J. Appl. Polym. Sci., Vol. 58, No. 2, pp. 439–48, 1995, DOI: 10.1002/app.1995.070580222.10.1002/app.1995.070580222 ↗
13. M.A. El-Hadek, and H.V. Tippur. J. Mater. Sci., Vol. 37(8), pp. 1649–60, 2002, DOI: 10.1023/A:1014957032638.10.1023/A:1014957032638 ↗
14. K. Wang, L. Chen, J. Wu, M.L. Toh, C. He, and A.F. Yee. Macromolecules, Vol. 38(3), pp. 788-800, 2005, DOI: 10.1021/ma048465n.10.1021/ma048465n ↗
15. A. Ozturk, C. Kaynak, and T. Tincer. Eur. Polym. J., Vol. 37, No. 12, pp. 2353–63, 2001, DOI: 10.1016/S0014-3057(01)00158-6.10.1016/S0014-3057(01)00158-6 ↗
16. N. Chikhi, S. Fellahi, and M. Bakar. Eur. Polym. J., Vol. 38, No. 2 pp. 251-264, 2002, DOI: 10.1016/S0014-3057(01)00194-X.10.1016/S0014-3057(01)00194-X ↗
17. Jang-Kyo Kim, D.B. Mackay, and Yiu-Wing Mai. Composites Vol. 24, No. 6, pp. 485-494, (1993), DOI: 10.1016/0010-4361(93)90018-4.10.1016/0010-4361(93)90018-4 ↗
18. T.H. Hsieh, A.J. Kinloch, K. Masania, J. Sohn Lee, A.C. Taylor, and S. Sprenger. J. Mater. Sci., Vol. 45, No. 5, pp. 1193–10, 2010, DOI: 10.1007/s10853-009-4064-9.10.1007/s10853-009-4064-9 ↗
19. L.S. Schadler, S.C. Giannaris, and P.M. Ajayan. Appl. Phys. Lett., Vol. 73, pp. 3842–44, 1998, DOI: 10.1063/1.122911.10.1063/1.122911 ↗
20. Shao-Yun Fu, Xi-Qiao Feng, Bernd Lauke, and Yiu-Wing Mai. Composites B, Vol. 39, No. 6, pp. 933–61, 2008, DOI: 10.1016/j.compositesb.2008.01.002.10.1016/j.compositesb.2008.01.002 ↗
21. Jun Ma, Mao-Song Mo, Xu-Sheng Du, Shao-Rong Dai, Ian Luck, J. Appl. Polym. Sci. Vol 110, No 1, pp 304–312, 2008, DOI: 10.1002/app.27882.10.1002/app.27882 ↗
22. H.R. Azimi, R.A. Pearson, and R.W. Hertzberg. Polym. Eng. Sci., Vol. 36, No. 18, pp. 2352–65, 1996, DOI: 10.1002/pen.10633.10.1002/pen.10633 ↗
23. A.J. Kinloch, S.J. Shaw, D.A. Tod, and D.L. Hunston. Polymer, Vol. 24, No. 10, pp. 1341–54, 1983, DOI: 10.1016/0032-3861(83)90070-8.10.1016/0032-3861(83)90070-8 ↗
24. A.J. Kinloch, S.J. Shaw, and D.L. Hunston. Polymer, Vol. 24, No. 10, pp. 1355–63, 1983, DOI: 10.1016/0032-3861(83)90071-X.10.1016/0032-3861(83)90071-X ↗
25. J. Gao, J. Li, B.C. Benicewicz, Su Zhao, H. Hillborg, and L.S. Schadler. Polymers, Vol. 4, No. 1, pp. 187-210, (2012), DOI: 10.3390/polym4010187.10.3390/polym4010187 ↗
26. Q-H. Le, H-C Kuan, J-B Dai, I. Zaman, L. Luong, and J. Ma. Polymer, Vol. 51(21), pp. 4867–79, 2010, DOI: 10.1016/j.polymer.2010.08.038.10.1016/j.polymer.2010.08.038 ↗
27. Robert M. Jones, Mechanics of composite material. Taylor & Francis, New York, 2nd Edition (1999).
28. S.J. Shaw: in Rubber Toughened Engineering Plastics, A.A. Collyer, eds., Springer, Dordrecht, 1994, pp. 165–209, DOI: 10.1007/978-94-011-1260-4_6.10.1007/978-94-011-1260-4_6 ↗
29. H.V. Tippur, K. Sridhar, and A.J. Rosakis. Int. J. Fract., Vol. 48, No. 3, pp. 193-204 (1991), DOI: 10.1007/BF00036631.10.1007/BF00036631 ↗
30. M.R. Dadfar, F. Ghadami, Mater. Des., Vol. 47, pp 16–20, (2013), DOI:10.1016/j.matdes.2012.12.035.10.1016/j.matdes.2012.12.035 ↗
31. B. Wetzel, P. Rosso, F. Haupert, and K. Friedrich. Eng. Fract. Mech., Vol. 73, No. 16, pp. 2375–98, (2006), DOI: 10.1016/j.engfracmech.2006.05.018.10.1016/j.engfracmech.2006.05.018 ↗
32. J.W. Hutchinson, and A.G. Evans. Acta Mater., Vol. 48, No. 1, pp. 125-135, (2000), DOI: 10.1016/S1359-6454(99)00291-8.10.1016/S1359-6454(99)00291-8 ↗