journal article·2009-05Open access

Effects of Alloying Elements on Sticking Behavior Occurring during Hot Rolling of Modified Ferritic STS430J1L Stainless Steels

Dae Jin Ha, Yong Jin Kim, Jong Seog Lee, Yong Deuk Lee, Sunghak Lee

Abstract

In this study, effects of alloying elements on the sticking behavior occurring during hot rolling of five kinds of modified ferritic STS430J1L stainless steels were investigated by analyzing high-temperature hardness and oxidation behavior. Hot-rolling simulation tests were conducted by a high-temperature wear tester that could simulate actual hot rolling. The simulation test results revealed that the sticking process proceeded with three stages, i.e., nucleation, growth, and saturation. Since the hardness continuously decreased as the test temperature increased while the formation of Fe-Cr oxides in the rolled steel surface region increased, the sticking of five steels was evaluated by considering both high-temperature hardness and oxidation. The addition of Zr, Cu, or Si had a beneficial effect on the sticking resistance, while the Ni addition did not make much difference to the sticking. Particularly, in the Si-rich steel, Si oxides formed first in the initial stage of the high-temperature oxidation, worked as initiation sites for Fe-Cr oxides, accelerated the formation of Fe-Cr oxides, and thus, decreased the sticking by over 10 times in comparison with the other steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. O. Kato and T. Kawanami: J. Jpn. Soc. Technol. Plast., 1987, vol. 28, pp. 264–71.
2. O. Kato and T. Kawanami: J. Jpn. Soc. Technol. Plast., 1989, vol. 30, pp. 103–09.
3. O. Kato, S. Uchida, and T. Kimuma: Seitetsu Kenkyu, 1989, vol. 335, pp. 35–42.
4. C. Jing, D.W. Suh, C.S. Oh, Z.C. Wang, and S.J. Kim: Met. Mater. Int., 2007, vol. 13, pp. 13–20.10.1007/BF03027817 ↗
5. T. Nakanishi: J. Soc. Tribol. Lubr. Eng., 1993, vol. 49, pp. 365–70.
6. S. Uchida, H. Yamamoto, M. Akata, K. Watanabe, and O. Kato: “What’s New in Roll Technologies of the World,” Report of Research Committee on Rolling Roll, ISIJ, Tokyo, 1995, p. 183.
7. Y.D. Lee, Y.Y. Lee, O.J. Kwon, G.S. Kim, and Y.G. Lee: “Development of Rolling Technology of 430 Stainless Steel,” Technical Report of POSCO Research Institute, POSCO, Pohang, Korea, 1993.
8. I.D. Choi, D.M. Bruce, D.K. Matlock, and J.G. Speer: Met. Mater. Int., 2008, vol. 14, pp. 139–47.10.3365/met.mat.2008.04.139 ↗
9. S. Lee, D. Suh, S. Oh, and W. Jin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 696–702.10.1007/s11661-998-0151-9 ↗
10. C.-Y. Son, C.K. Kim, D.J. Ha, S. Lee, J.S. Lee, K.T. Kim, and Y.D. Lee: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2776–87.10.1007/s11661-007-9312-5 ↗
11. D.W. Suh, C.S. Oh, and S.J. Kim: Met. Mater. Int., 2008, vol. 14, pp. 175–83.
12. C.C. Hsieh, D.Y. Lin, and W.T. Wu: Met. Mater. Int., 2007, vol. 13, pp. 359–64.10.1007/BF03027868 ↗
13. W. Jin, J.Y. Choi, and Y.Y. Lee: ISIJ Int., 2000, vol. 38, pp. 789–93.10.2355/isijinternational.40.789 ↗
14. J.E. Shingly and C.R. Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1989, p. 71.
15. C.K. Kim, D.-G. Lee, and S. Lee: Mater. Sci. Technol., 2007, vol. 23, pp. 1065–74.10.1179/174328407X213170 ↗
16. C.K. Kim, J.I. Park, J.H. Ryu, and S. Lee: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 481–92.10.1007/s11661-004-0359-2 ↗
17. C.K. Kim, J.I. Park, S. Lee, Y.C. Kim, N.J. Kim, and J.S. Yang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 87–97.10.1007/s11661-005-0141-0 ↗
18. ASM Handbook, ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 18.
19. L.H.S. Luong and T. Heijkoop: Wear, 1981, vol. 71, pp. 93–102.10.1016/0043-1648(81)90142-3 ↗
20. Y.H. Moon, J.W. Kim, and C.J. Van Tyne: Met. Mater. Int., 2005, vol. 2, pp. 169–76.10.1007/BF03027462 ↗
21. H.G. Jung, J.K. Ahn, and K.Y. Kim: J. Kor. Inst. Met. Mater., 2001, vol. 39, pp. 1032–40.
22. J. Mougin, M. Dupeux, L. Antoni, and A. Galerie: Mater. Sci. Eng., 2003, vol. A359, pp. 44–51.10.1016/S0921-5093(03)00355-1 ↗