journal article·2015-10

Contrasting the Microstructural and Mechanical Response to Shock Loading of Cold-Rolled Copper with Annealed Copper

Daniel L. Higgins, Bo Pang, Jeremy C. F. Millett, Glenn Whiteman, Ian P. Jones, Yu-Lung Chiu

Publisher page

Abstract

The response of copper to shock loading and cold working is well documented. Both shock loaded and cold-worked annealed copper display a high dislocation density and increased yield strength. However, as of yet no work has been carried out on the microstructure of shock-loaded cold-worked copper. Both annealed and cold-worked copper have been tested using a gas gun to ascertain the effect of shock loading on cold-worked copper. The annealed copper was loaded to a peak pressure of 5 GPa and the cold-worked copper was loaded to peak pressures of 6 and 10 GPa. It was found that the shock-loaded cold-worked copper had a higher hardness than the shock-loaded annealed copper and that the hardness of the cold-worked copper increased with peak shock pressure. Each specimen analyzed displayed different variations on the classic shocked copper microstructure, which was ascribed to the different momentum trapping apparatus used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. C.S. Smith, Trans. Met. Soc. AIME 212, 574–589 (1968).
2. G.T. Gray III and K.S. Vecchio, Metall. Mater. Trans. A, 26A, 2555–2563 (1995).10.1007/BF02669413 ↗
3. P.D. Follansbee and G.T. Gray III, Mater. Sci. Eng. A138, 23–31 (1991).10.1016/0921-5093(91)90673-B ↗
4. J.C.F. Millett, N.K. Bourne, N.T. Park, G. Whiteman, and G.T. Gray III, J. Mater. Sci. 46, 3899–3906 (2011).10.1007/s10853-011-5311-4 ↗
5. M.A. Meyers, F. Gregori, B.K. Kad, M.S. Schneider, D.H. Kalantar, B.A. Remington, G. Ravichandran, T. Boehly, and J. S. Wark, Acta. Mater. 51, 1211–1228 (2003).10.1016/S1359-6454(02)00420-2 ↗
6. N.K. Bourne and G.T. Gray III, Proc. R. Soc. A. 461, 3297–3312 (2005).10.1098/rspa.2005.1501 ↗
7. M.A. Mogilevskii, Combust. Explos. Shock Waves, 21, 130–131 (1985).
8. J. Goodhew: Specimen Preparation for Transmission Electron Microscopy of Materials, Oxford University Press, Oxford (1984).