journal article·2015-12

Mechanical Properties and Microstructural Evolution of Simulated Heat-Affected Zones in Wrought Eglin Steel

Brett M. Leister, John N. DuPont, Masashi Watanabe, Rachel A. Abrahams

Publisher page

Abstract

A comprehensive study was performed to correlate the mechanical properties and microstructural evolution in the heat-affected zone of Eglin steel. A Gleeble 3500 thermo-mechanical simulator was used to simulate weld thermal cycles with different peak temperatures at a heat input of 1500 J/mm. These samples underwent mechanical testing to determine strength and toughness in the as-welded and post-weld heat-treated conditions. The inter-critical heat-affected zone (HAZ) had the lowest strength following thermal simulation, while the fine-grain and coarse-grain heat-affected zone exhibited increased strength when compared to the inter-critical HAZ. The toughness of the heat-affected zone in the as-simulated condition is lower than that of the base metal in all regions of the HAZ. Post-weld heat treatments (PWHTs) increased the toughness of the HAZ, but at the expense of strength. In addition, certain combinations of PWHTs within specific HAZ regions exhibited low toughness caused by tempered martensite embrittlement or intergranular failure. Synchrotron X-ray diffraction data have shown that Eglin steel has retained austenite in the fine-grain HAZ in the as-simulated condition. In addition, alloy carbides (M23C6, M2C, M7C3) have been observed in the diffraction spectra for the fine-grain and coarse-grain HAZ following a PWHT of 973 K (700 °C)/4 hours.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. M. Dilmore and J.D. Ruhlman: United States Patent: 7537727
2. Horn, R. M. & Ritchie, R. O. Metall. Mater. Trans. 9 A, 1039–1053 (1978).10.1007/BF02652208 ↗
3. Speich, G. & Leslie, W. Metall. Mater. Trans. B 3, 1043–1054 (1972).10.1007/BF02642436 ↗
4. Youngblood, J. & Raghavan, M. Metall. Mater. Trans. A 8A, 1439–1448 (1977).10.1007/BF02642857 ↗
5. Kozeschnik, E. & Bhadeshia, H. K. D. H. Mater. Sci. Technol. 24, 343–347 (2008).10.1179/174328408X275973 ↗
6. Delagnes, D., Lamesle, P., Mathon, M. H., Mebarki, N. & Levaillant, C. Mater. Sci. Eng. A 394, 435–444 (2005).10.1016/j.msea.2004.11.050 ↗
7. J.R. Paules, M.F. Dilmore, and K.J. Handerhan: Materials Science Technology 2005 Conference, vol. 2, Association for Iron and Steel Technology, AISTECH, 25–28 Sept. 2005, pp. 13–23.
8. Sandia National Laboratories. Adv. Mater. Process. Vol 162 162, 18–19 (2004).
9. R. Abrahams: Unpublished Research, Penn State University, State College, 2008.
10. American Society for Testing and Materials: ASTM E8 ASTM Book Stand, ASTM, West Conshohocken, 2004.
11. American Society for Testing and Materials: ASTM E23 - 07ae1 ASTM Book Stand, ASTM, West Conshohocken, 2007.
12. American Society for Testing and Materials: ASTM E975 - 13 ASTM Book Stand, ASTM, West Conshohocken, 2013.
13. B.D. Cullity and S.R. Stock: Elements of X-Ray Diffraction, Prentice Hall, Upper Saddle River, 2001.
14. J.M. Zuo and J.C. Mabon: Microsc. Microanal., 2004, vol. 10.10.1017/S1431927604884319 ↗
15. Yakel, H. L. Int. Met. Rev. 30, 17–44 (1985).10.1179/imr.1985.30.1.17 ↗
16. Jack, K. H. J. Iron Steel Inst. 169, 26–36 (1951).
17. Bagaryatski, Y. A. Dokl. Akad. Nauk SSR 73, 1161 (1950).
18. Kurdjumov, G. V. & Sachs, G. Z. Z Phys 64, 325 (1930).10.1007/BF01397346 ↗
19. Yang, H.-S. & Bhadeshia, H. K. D. H. Scr. Mater. 60, 493–495 (2009).10.1016/j.scriptamat.2008.11.043 ↗
20. Thomas, G. Metall. Mater. Trans. A 9, 439–450 (1978).10.1007/BF02646396 ↗
21. Bjorklund, S., Donaghey, L. F. & Hillert, M. Acta Metall. 20, 867–874 (1972).10.1016/0001-6160(72)90079-X ↗
22. Briant, C. L. & Banerji, S. K. Int. Met. Rev. 23, 164–199 (1978).10.1179/imr.1978.23.1.164 ↗
23. Olefjord, I. Int. Met. Rev. 23, 149–163 (1978).10.1179/095066078790136661 ↗
24. G.C. Gould: Temper Embrittlement Steel 59–59–15, ASTM International, 1968.
25. Guttmann, M. et al. Metall. Trans. 5, 167–177 (1974).10.1007/BF02642941 ↗
26. H.L. Marcus, L.H. Hackett, and P.W. Palmberg: Temper Embrittlement Alloy Steels 90–90–14, ASTM International, 1972.10.1520/STP38787S ↗
27. Haidemenopoulos, G. N. & Vasilakos, A. N. J. Alloys Compd. 247, 128–133 (1997).10.1016/S0925-8388(96)02574-1 ↗
28. Hebsur, M. J. Mater. Energy Syst. 4, 28–37 (1982).10.1007/BF02833379 ↗