Resolving the Martensitic Transformation in Q&P Steels In-Situ at Dynamic Strain Rates Using Synchrotron X-ray Diffraction
Source abstract
Abstract
The dynamic deformation response of two quenching and partitioning (Q&P) steels was investigated using a high strain rate tension pressure bar and in-situ synchrotron radiography and diffraction. This allowed for concurrent measurements of the martensitic transformation, the elastic strains/stresses on the martensite and ferrite, and the bulk mechanical behavior. The steel with the greater fraction of ferrite exhibited greater ductility and lower strength, suggesting that dislocation slip in ferrite enhanced the deformability. Meanwhile, the kinetics of the martensitic transformation appeared similar for both steels, although the steel with a greater ferrite fraction retained more austenite in the neck after fracture.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. W. Bleck, X. Guo, and Y. Ma: Steel Res. Int., 2017, vol. 88, p. 10. https://doi.org/10.1002/srin.201700218.10.1002/srin.201700218 ↗
2. C.L. Magee: Transformation Kinetics, Microplasticity and Ageing of Martensite in Fe-31-Ni. PhD thesis, Carnegie Institute of Technologie University, Ph.D. Thesis (1966).
3. G.W. Greenwood, R.H. Johnson: Proc. R. Soc. A, 1965, vol. 283, 403–22. https://doi.org/10.1098/rspa.1965.0029.10.1098/rspa.1965.0029 ↗
4. D.K. Matlock, J.G. Speer, E. De Moor, P.J. Gibbs, Jestech, 2012, vol. 15, 1–12.
5. N.J. Wengrenovich, G.B. Olson: Mater. Today, 2015, vol. 2, pp. 639–42. https://doi.org/10.1016/j.matpr.2015.07.365.10.1016/j.matpr.2015.07.365 ↗
6. J. Speer, D.K. Matlock, B.C. De Cooman, J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22. https://doi.org/10.1016/S1359-6454(03)00059-4.10.1016/S1359-6454(03)00059-4 ↗
7. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlock, F.C. Rizzo, K.D. Clarke, E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22. https://doi.org/10.1016/j.actamat.2007.08.051.10.1016/j.actamat.2007.08.051 ↗
8. C.B. Finfrock, A.J. Clarke, G.A. Thomas, K.D. Clarke: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2025–34. https://doi.org/10.1007/s11661-020-05666-8.10.1007/s11661-020-05666-8 ↗
9. S.S. Hecker, M.G. Stout, K.P. Staudhammer, J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26. https://doi.org/10.1007/BF02644428.10.1007/BF02644428 ↗
10. L.E. Murr, K.P. Staudhammer, S.S. Hecker: Metall. Trans. A, 1982, vol. 13, pp. 627–35. https://doi.org/10.1007/BF02644428.10.1007/BF02644428 ↗
11. G.I. Taylor, H. Quinney, Proc. R. Soc. Lond. Ser. A , 1934, vol. 143, pp. 307–26. https://doi.org/10.1098/rspa.1934.0004.10.1098/rspa.1934.0004 ↗
12. Finfrock, C., Becker, C.G., Ballard, T., Thomas, G., Clarke, K., Clarke, A.: in Contributed Papers from Materials Science & Technology (MS &T19), Portland, Oregon, pp. 1236–43 (2019). https://doi.org/10.7449/2019/MST_2019_123.10.7449/2019/MST_2019_123 ↗
13. J. Coryell, V. Savic, L. Hector, S. Mishra: Temperature Effects on the Deformation and Fracture of a Quenched-and-Partitioned Steel. SAE Technical Papers Technical Report No. 2013-01-0610 (2013). https://doi.org/10.4271/2013-01-0610.10.4271/2013-01-0610 ↗
14. W.A. Poling, E. De Moor, J.G. Speer, K.O. Findley: Metals, 2021, vol. 11, p. 2. https://doi.org/10.3390/met11020375.10.3390/met11020375 ↗
15. C.B. Finfrock, B. Ellyson, S.R.J. Likith, D. Smith, C.J. Rietema, A.I. Sav-Ille, M.M. Thrun, G. Becker, A.L. Araujo, E.J. Pavlina, J. Hu, J.-S. Park, A.J. Clarke, K.D. Clarke: Acta Mater., 2022. https://doi.org/10.1016/j.actamat.2022.118126.10.1016/j.actamat.2022.118126 ↗
16. C.B. Finfrock, M.M. Thrun, D. Bhattacharya, T. Ballard, A.J. Clarke, K.D. Clarke, Metall. Mater. Trans. A , 2021, vol. 52A, pp. 928–42. https://doi.org/10.1007/s11661-020-06127-y.10.1007/s11661-020-06127-y ↗
17. C.B. Finfrock: Temperature and Strain Rate Dependence of the Martensitic Transformation and Mechanical Properties in Advanced High Strength Steels. PhD thesis, Colorado School of Mines, Golden, CO (May 2022).
18. C.B. Finfrock, D. Bhattacharya, B.N.L. McBride, T.J. Ballard, A.J. Clarke, K.D. Clarke: JOM, 2022, vol. 74, pp. 506–12. https://doi.org/10.1007/s11837-021-05039-5.10.1007/s11837-021-05039-5 ↗
19. R. Alturk, L.G. Hector, C. Matthew Enloe, F. Abu-Farha, T.W. Brown: JOM, 2018, vol. 70, pp. 894–905. https://doi.org/10.1007/s11837-018-2830-3.10.1007/s11837-018-2830-3 ↗
20. C. Enloe, V. Savic, W. Poling, L. Hector, R. Alturk: Strain Rate Effect on Martensitic Transformation in a TRIP Steel Containing Carbide-Free Bainite. SAE Technical Papers, Technical Report No. 2019-01-0521, 1–10 (2019). https://doi.org/10.4271/2019-01-0521.10.4271/2019-01-0521 ↗
21. X. Yang, X. Xiong, Z. Yin, H. Wang, J. Wang, D. Chen: Exp. Mech., 2014, vol. 54, pp. 641–52. https://doi.org/10.1007/s11340-013-9828-0.10.1007/s11340-013-9828-0 ↗
22. G.B. Olson, M. Cohen: Metall. Trans. A, 1975, vol. 6A, pp. 791–95. https://doi.org/10.1007/BF02672301.10.1007/BF02672301 ↗
23. H. Du, Y. Gong, T. Liang, Y. Li, Y. Xu, X. Lu, Q. Zeng, X. Jin: Metall. Mater. Trans. A, 2020, vol. dA, pp. 2097–2117. https://doi.org/10.1007/s11661-020-05701-8.10.1007/s11661-020-05701-8 ↗
24. Hudspeth, M., Claus, B., Dubelman, S., Black, J., Mondal, A., Parab, N., Funnell, C., Hai, F., Qi, M.L., Fezzaa, K., Luo, S.N., Chen, W.: Rev. Sci. Instrum., 2013, vol. 84, p. 2. https://doi.org/10.1063/1.4789780.10.1063/1.4789780 ↗
25. M. Hudspeth, T. Sun, N. Parab, Z. Guo, K. Fezzaa, S. Luo, W. Chen: J. Synchr. Radiat., 2015, vol. 22, pp. 49–58. https://doi.org/10.1107/S1600577514022747.10.1107/S1600577514022747 ↗
26. C.D. Kirk, N.D. Parab, N. Kedir, Z. Guo, Y. Nie, S. Paulson, J. Thomas, K. Fezzaa, T. Sun, W. Chen: Exp. Mech., 2019, vol. 59, pp. 805–18. https://doi.org/10.1007/s11340-019-00524-0.10.1007/s11340-019-00524-0 ↗
27. K. Kumar, A. Pooleery, K. Madhusoodanan, R.N. Singh, J.K. Chakravartty, B.K. Dutta, R.K. Sinha:Proc. Eng., 2014, 86, pp. 899–909. https://doi.org/10.1016/j.proeng.2014.11.112.10.1016/j.proeng.2014.11.112 ↗
28. T. Sun, K. Fezzaa: J. Synchr. Radiat., 2016, vol. 23, pp. 1046–53. https://doi.org/10.1107/S1600577516005804.10.1107/S1600577516005804 ↗
29. M.A. Meyers: Dynamic Behavior of Materials (Wiley, New York, 1994).10.1002/9780470172278 ↗
30. G.E. Dieter: Mech. Metall., 3rd edn. (McGraw-Hill, New York, 1961).
31. S. Harjo, N. Tsuchida, J. Abe, W. Gong: Sci. Rep., 2017, vol. 7, pp. 2–4. https://doi.org/10.1038/s41598-017-15252-5.10.1038/s41598-017-15252-5 ↗