journal article·2022-09

Effect of Cryogenic Thermal Cycling on Tribocorrosion Performance of Fe-Based Bulk Amorphous Alloy in 3.5 Pct NaCl Solution

Juan Jin, Xiulin Ji, Sheng Cao, Weiwei Zhu

Publisher page

Abstract

The effects of cryogenic thermal cycling on the tribocorrosion behavior of Fe41Co7Cr15Mo14C15B6Y2 bulk amorphous alloy were studied in 3.5 pct NaCl solution. The relaxation enthalpy and fracture toughness increased by the cryogenic thermal cycling treatment while the hardness decreased. Moreover, the corrosion resistance enhanced with the formation of more stable passive film. Accordingly, when sliding against ZrO2 ball under 10 N load in 3.5 pct NaCl solution, the corrosive wear rates of Fe-based bulk amorphous alloys generally decreased with the increase of the number of cryogenic thermal cycles. After 60-cycle treatment, the wear rate decreased by 36.4 pct, which is about 3.3 times lower than that of 316L SS. Meanwhile, cryogenic thermal cycling is beneficial to reduce the coefficient of friction (COF). The dominant wear mechanism is the abrasive wear combined with corrosive wear. The improved toughness and passivation ability due to the cryogenic thermal cycling are responsible for the decline of ΔVW, so as to enhance the tribocorrosion resistance. Therefore, cryogenic thermal cycling could be an effective way to improve the tribocorrosion performance of amorphous alloys and coatings in marine environment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metal Alloys Wear and Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. S.D. Li, Q. Wei, Q. Li, B.L. Jiang, Y. Chen, and Y.F. Sun: Mater. Sci. Eng. C, 2015, vol. 52, pp. 235–41.10.1016/j.msec.2015.03.041 ↗
2. C.L. Qin, Q.F. Hu, Y.Y. Li, Z.F. Wang, W.M. Zhao, D.V. Louzguine-Luzgin, and A. Inoue: Mater. Sci. Eng. C, 2016, vol. 69, pp. 513–21.10.1016/j.msec.2016.07.022 ↗
3. J.J. Si, C.X. Du, T. Wang, Y.D. Wu, R.S. Wang, and X.D. Hui: J. Alloys Compd., 2018, vol. 741, pp. 542–48.10.1016/j.jallcom.2018.01.074 ↗
4. N.B. Hua, X.S. Hong, Z.L. Liao, L. Zhang, X.Y. Ye, Q.T. Wang, and P.K. Liaw: J. Non-Cryst. Solids, 2020, vol. 542, p. 120088.10.1016/j.jnoncrysol.2020.120088 ↗
5. D.Z. Segu, J.H. Choi, and S.S. Kim: J. Mech. Sci. Technol., 2012, vol. 26, pp. 3565–70.10.1007/s12206-012-0855-z ↗
6. P.H. Tsai, A.C. Xiao, J.B. Li, J.S.C. Jang, J.P. Chu, and J.C. Huang: J. Alloys Compd., 2014, vol. 586, pp. 94–98.10.1016/j.jallcom.2013.09.186 ↗
7. X.L. Ji, B. Hu, Y.X. Li, and S.Q. Wang: Tribol. Int., 2015, vol. 91, pp. 214–20.10.1016/j.triboint.2015.02.021 ↗
8. S.F. Guo, K.C. Chan, S.H. Xie, P. Yu, Y.J. Huang, and H.J. Zhang: J. Non-Cryst. Solids, 2013, vol. 369, pp. 29–33.10.1016/j.jnoncrysol.2013.02.026 ↗
9. D. Zenebe, S. Yi, and S.S. Kim: J. Mater. Sci., 2012, vol. 47, pp. 1446–51.10.1007/s10853-011-5928-3 ↗
10. N.B. Hua, W.Z. Chen, Q.T. Wang, Q.H. Guo, Y.T. Huang, and T. Zhang: J. Alloys Compd., 2018, vol. 745, pp. 111–20.10.1016/j.jallcom.2018.02.138 ↗
11. D.D. Liang, X.S. Wei, T.C. Ma, B. Chen, H.R. Jiang, Y. Dong, and J. Shen: J. Non-Cryst. Solids, 2019, vol. 510, pp. 62–70.10.1016/j.jnoncrysol.2018.12.024 ↗
12. Y. Sun and E. Haruman: Corros. Sci., 2011, vol. 53, pp. 4131–40.10.1016/j.corsci.2011.08.021 ↗
13. Q. Sun, D.M. Miskovic, and M. Ferry: J. Mater. Sci. Technol., 2022, vol. 104, pp. 214–23.10.1016/j.jmst.2021.06.059 ↗
14. J. Saida, M. Wakeda, and R. Yamada: Appl. Phys. Lett., 2013, vol. 103, 221910(1-4).10.1063/1.4835076 ↗
15. W. Guo, R. Yamada, and J. Saida: Intermetallics, 2018, vol. 93, pp. 141–47.10.1016/j.intermet.2017.11.015 ↗
16. M. Bruns and F. Varnik: Materials, 2022, vol. 15, p. 829.10.3390/ma15030829 ↗
17. J. Zhou, S.Y. Di, B.A. Sun, Q.S. Zeng, and B.L. Shen: J. Mater. Sci. Technol., 2021, vol. 65, pp. 54–60.10.1016/j.jmst.2020.04.081 ↗
18. S.V. Ketov, A.S. Trifonov, Y.P. Ivanov, A.Y. Churyumov, A.V. Lubenchenko, A.A. Batrakov, J. Jiang, D.V. Louzguine-Luzgin, J. Eckert, J. Orava, and A.L. Greer: NPG Asia Mater., 2018, vol. 10, pp. 137–45.10.1038/s41427-018-0019-4 ↗
19. W. Guo, J.J. Saida, M. Zhao, S.L. Lü, and S.S. Wu: Mater. Lett., 2019, vol. 247, pp. 135–38.10.1016/j.matlet.2019.03.117 ↗
20. M.C. Ri, Y.H. Sun, Z.Y. Xue, D.W. Ding, and W.H. Wang: J. Alloys Compd., 2019, vol. 781, pp. 357–61.10.1016/j.jallcom.2018.12.097 ↗
21. N.V. Priezjev: J. Non-Cryst. Solids, 2019, vol. 503, pp. 131–38.10.1016/j.jnoncrysol.2018.09.041 ↗
22. S.Y. Di, Q.Q. Wang, Y.Y. Yang, T. Liang, J. Zhou, L. Su, K.B. Yin, Q.S. Zeng, L.T. Sun, and B.L. Shen: J. Mater. Sci. Technol., 2022, vol. 97, pp. 20–28.10.1016/j.jmst.2021.04.034 ↗
23. J. Saida, R. Yamada, and M. Wakeda: Zairyo, 2019, vol. 68, pp. 185–90.
24. H.M. Zhai, Y. Du, X.Q. Li, W.S. Li, and H.F. Wang: J. Mater. Sci., 2021, vol. 56, pp. 8276–77.10.1007/s10853-021-05794-5 ↗
25. S.Z. Abbas, F.A. Khalid, and H. Zaigham: J. Non-Cryst. Solids, 2017, vol. 457, pp. 86–92.10.1016/j.jnoncrysol.2016.11.022 ↗
26. J.L. Gu, Y. Shao, L.X. Shi, J.J. Si, and K.F. Yao: Intermetallics, 2019, vol. 110, p. 106467.10.1016/j.intermet.2019.04.010 ↗
27. L. Zhang, Y. Wu, S.D. Feng, W. Li, H.W. Zhang, H.M. Fu, H. Li, Z.W. Zhu, and H.F. Zhang: J. Mater. Sci. Technol., 2020, vol. 38, pp. 73–79.10.1016/j.jmst.2019.08.022 ↗
28. S.Y. Di, Q.Q. Wang, J. Zhou, Y.Y. Shen, J.Q. Li, M.Y. Zhu, K.B. Yin, Q.S. Zeng, L.T. Sun, and B.L. Shen: Scr. Mater., 2020, vol. 187, pp. 13–18.10.1016/j.scriptamat.2020.05.059 ↗
29. S.V. Ketov, Y.H. Sun, S. Nachum, Z. Lu, A. Checchi, A.R. Beraldin, H.Y. Bai, W.H. Wang, D.V. Louzguine-Luzgin, M.A. Carpenter, and A.L. Greer: Nature, 2015, vol. 524, pp. 200–03.10.1038/nature14674 ↗
30. J. Pan, Y.X. Wang, Q. Guo, D. Zhang, A.L. Greer, and Y. Li: Nat. Commun., 2018, vol. 9, pp. 1–9.10.1038/s41467-017-02088-w ↗
31. C.M. Meylan, F. Papparotto, S. Nachum, J. Orava, M. Miglierini, V. Basykh, J. Scopus preview - Ferenc, T. Kulik, and L. Greer: J. Non-Cryst. Solids, 2020, vol. 548, 120299.10.1016/j.jnoncrysol.2020.120299 ↗
32. D. Grell, F. Dabrock, and E. Kerscher: Fatigue Fract. Eng. Mater. Struct., 2018, vol. 41, pp. 1330–43.10.1111/ffe.12777 ↗
33. R. Yamada, N. Tanaka, W. Guo, and J. Saida: Mater Trans, 2017, vol. 58, pp. 1463–68.10.2320/matertrans.MAW201703 ↗
34. H.M. Zhai, X.Q. Li, W.S. Li, B. Cheng, D.Q. He, X.J. Zhang, and S. Cui: Surf. Coat. Technol., 2021, vol. 410, p. 126962.10.1016/j.surfcoat.2021.126962 ↗
35. M.F. Naeini, M.H. Shariat, and M. Eizadjou: J. Alloys Compd., 2010, vol. 509, pp. 4696–4700.10.1016/j.jallcom.2011.01.066 ↗
36. Z.B. Wang, H.X. Hu, and Y.G. Zheng: Corros. Sci., 2018, vol. 130, pp. 203–17.10.1016/j.corsci.2017.10.028 ↗
37. J. Sun, M. Zhang, G.Z. Ding, Y.J. Wang, M.M. Yu, F. Liu, Y.W. Sun, K.J. Zhu, X.J. Zhao, and L. Liu: Colloids Surf. A, 2022, vol. 635, p. 128107.10.1016/j.colsurfa.2021.128107 ↗
38. A. López-Ortega, R. Bayón, J.L. Arana, A. Arredondo, and A. Igartua: Tribol. Int., 2018, vol. 121, pp. 341–52.10.1016/j.triboint.2018.01.049 ↗
39. D.D. Liang, X.S. Wei, C.T. Chang, J.W. Li, Y. Wang, X.M. Wang, and J. Shen: Acta Metall. Sin., 2018, vol. 31, pp. 1098–1108.10.1007/s40195-018-0791-8 ↗
40. Y.B. Wang, H.F. Li, Y. Cheng, S.C. Wei, and Y.F. Zheng: Electrochem. Commun., 2009, vol. 11, pp. 2187–90.10.1016/j.elecom.2009.09.027 ↗
41. Y.W. Ye, Y.X. Wang, X.L. Ma, D.W. Zhang, L.P. Wang, and X.G. Li: Diamond Relat. Mater., 2017, vol. 79, pp. 70–78.10.1016/j.diamond.2017.09.002 ↗
42. E. Haruman, Y. Sun, and M.S. Adenan: Tribol. Int., 2020, vol. 151, p. 106412.10.1016/j.triboint.2020.106412 ↗
43. E. Huttunen-Saarivirta, V. Heino, E. Isotahdon, L. Kilpi, and H. Ronkainen: Tribol. Int., 2020, vol. 142, p. 106006.10.1016/j.triboint.2019.106006 ↗
44. L.W. Tan, Z.W. Wang, Y.L. Ma, Y. Yan, and L.J. Qiao: Mater. Res. Express., 2021, vol. 8, p. 086501.10.1088/2053-1591/ac1825 ↗
45. M.M. Stack, J. Rodling, M.T. Mathew, H. Jawan, W. Huang, G. Park, and C. Hodge: Wear, 2010, vol. 269, pp. 376–82.10.1016/j.wear.2010.04.022 ↗
46. Y.Q. Fu, F. Zhou, M.D. Zhang, Q.Z. Wang, and Z.F. Zhou: Friction, 2021, vol. 9, pp. 1599–1615.10.1007/s40544-020-0445-5 ↗
47. M. Roy, N.S. More, S. Mischler, and N. Diomidis: Acta Biomater., 2012, vol. 8, pp. 852–59.10.1016/j.actbio.2011.09.034 ↗
48. J. Chen and Q. Zhang: Trans. Nonferrous Met. Soc. China, 2016, vol. 26, pp. 1011–18.10.1016/S1003-6326(16)64164-X ↗
49. W.H. Wang: Prog. Mater Sci., 2012, vol. 57, pp. 487–656.10.1016/j.pmatsci.2011.07.001 ↗
50. N. Espallargas, R.E. Aune, C. Torres, N. Papageorgiou, and A.I. Muñoz: Wear, 2013, vol. 301, pp. 271–79.10.1016/j.wear.2012.12.053 ↗
51. Y. Wang, L.L. Shi, D.L. Duan, S. Li, and J. Xu: Mater. Sci. Eng. C, 2014, vol. 37, pp. 292–304.10.1016/j.msec.2014.01.016 ↗
52. V.G. Efremenko, K. Shimizu, T. Noguchi, A.V. Efremenko, and Y.G. Chabak: Wear, 2013, vol. 305, pp. 155–65.10.1016/j.wear.2013.06.006 ↗