journal article·2021-11Open access

Characterization of Tribological and Mechanical Properties of the Si3N4 Coating Fabricated by Duplex Surface Treatment of Pack Siliconizing and Plasma Nitriding on AISI D2 Tool Steel

Mojtaba Najafizadeh, Mehran Ghasempour-Mouziraji, Behzad Sadeghi, Pasquale Cavaliere

Abstract

Abstract Silicon nitride (Si3N4) coating was deposited on AISI D2 tool steel through employing duplex surface treatments—pack siliconizing followed by plasma nitriding. Pack cementation was performed at 650 °C, 800 °C, and 950 °C for 2 and 3 hours by using various mixtures to realize the silicon coating. X-ray diffraction analyses and scanning electron microscopy observations were employed for demonstrating the optimal process conditions leading to high coating adhesion, uniform thickness, and composition. The optimized conditions belonging to siliconizing were employed to produce samples to be further processed via plasma nitriding. This treatment was performed with a gas mixture of 75 pct H2-25 pct N2, at the temperature of 550 °C for 7 hours. The results showed that different nitride phases such as Si3N4-β, Si3N4-γ, Fe4N, and Fe3N can be recognized as coatings reinforcements. It was demonstrated that the described composite coating procedure allowed to obtain a remarkable increase in hardness (80 pct higher with respect to the substrate) and wear resistance (30 pct decrease of weight loss) of the tool steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. W.H. Wills: Trans. ASM., 1935, vol. 23, p. 469. .
2. S.J. Gobbi, V.J. Gobbi, G. Reinke, P.V. Muterlle, and D.M. Rosa: Mater. Sci. Technol., 2019, vol. 35(11), pp. 1355–64. .10.1080/02670836.2019.1624018 ↗
3. A.M. Khan, M. Jamil, A. Ul Haq, S. Hussain, L. Meng, and N. He: Ind. Lubr. Tribol., 2019, vol. 71(2), pp. 267–77. .10.1108/ILT-11-2017-0322 ↗
4. D. Bombač, M. Terčelj, G. Kugler, and I. Peruš: Mater. Sci. Technol., 2018, vol. 34(14), pp. 1723–36. .10.1080/02670836.2018.1475862 ↗
5. A. Yapici, S.E. Aydin, V. Koc, E. Kanca, and M. Yildiz: Prot. Met. Phys. Chem. Surf., 2019, vol. 55(2), pp. 341–51. .10.1134/S207020511902028X ↗
6. M. Keddam and M. Kulka: Phys. Met. Metall., 2018, vol. 119(9), pp. 842–51. .10.1134/S0031918X18090065 ↗
7. J. Xiang, F. Xie, X. Wu, and Y. Yu: Tribol. Int., 2019, vol. 136, pp. 45–57. .10.1016/j.triboint.2019.03.017 ↗
8. J. Tian, W.H. Yu, W. Tian, J. Zhao, Y.Q. Li, and Y.Z. Liu: Surf. Eng., 2015, vol. 31(4), pp. 289–94. .10.1179/1743294414Y.0000000434 ↗
9. X.J. Lu and Z.D. Xiang: Met. Trans., 2017, vol. A48, pp. 580–3. .10.1007/s11661-016-3873-0 ↗
10. J. Sun, T. Li, G.-P. Zhang, and Q.-G. Fu: J. Alloys Compd., 2019, vol. 790, pp. 1014–22. .10.1016/j.jallcom.2019.03.229 ↗
11. W.L. Byeong: Int. J. Mod. Phys., 2018, vol. B 32, p. 1840056. .
12. N. Chaia, L. Portebois, S. Mathieu, N. David, and M. Vilasi: J. Nucl. Mater., 2017, vol. 484, pp. 148–56. .10.1016/j.jnucmat.2016.11.027 ↗
13. X. Li, G. Hu, J. Tian, W. Tian, W. Xie, and X. Li: J. Mater. Eng. Perform., 2018, vol. 27, pp. 1073–82. .10.1007/s11665-018-3203-3 ↗
14. X. Li, X. Guo, and Y. Qiao: Trans. Nonferrous Met. Soc. China., 2016, vol. 26, pp. 1892–901. .10.1016/S1003-6326(16)64267-X ↗
15. J. Xiao, Y. Huang, Q. Zhou, J. Wang, and X. He: Surf. Eng., 2019, vol. 35(8), pp. 719–27. .10.1080/02670844.2018.1564994 ↗
16. Z.A. Fazel, H. Elmkhah, M. Nouri, and A. Fattah-Alhosseini: Mater. Res. Express., 2019, vol. 6(5), p. 412. .
17. J. Xue, G. Tao, C. Tang, N. Xu, F. Li, and C. Yin: Surf. Coat. Technol., 2020, vol. 382, p. 125217. .10.1016/j.surfcoat.2019.125217 ↗
18. C.-B. Tang, F.-R. Wen, H.-X. Chen, J.-J. Liu, G.-y Tao, Xu. Ni-jun, and J.-Q. Xue: J. Alloys Compd., 2019, vol. 778, pp. 972–81. .10.1016/j.jallcom.2018.11.198 ↗
19. I. Ebrahimzadeh and F. Ashrafizadeh: Ceram. Int., 2014, vol. 40(10), pp. 16429–39. .10.1016/j.ceramint.2014.07.151 ↗
20. F. Haftlang, A. Habibolahzadeh, and M. Heydarzade Shohi: Vacuum., 2014, vol. 107, pp. 155–8. .10.1016/j.vacuum.2014.04.014 ↗
21. L. Mouri, I. Mabille, C. Fiaud, J. Amouroux, G. Catillon, and R. Gras: Thin Solid Films., 2001, vol. 389(1), pp. 153–60. .10.1016/S0040-6090(01)00875-6 ↗
22. I. Asempah, J. Xu, L. Yu, H. Ju, F. Wu, and H. Luo: Surf. Eng., 2019, vol. 35(8), pp. 701–9. .10.1080/02670844.2019.1575569 ↗
23. D. Stathokostopoulos, D. Chaliampalias, N. Pliatsikas, S. Kassavetis, E. Pavlidou, P. Patsalas, S. Logothetidis, K. Chrissafis, and G. Vourlias: Surf. Eng., 2018, vol. 34(3), pp. 243–50. .10.1080/02670844.2016.1274841 ↗
24. S. Semboshi, S. Kimura, A. Iwase, and N. Ohtsu: Surf. Coat. Technol., 2014, vol. 258, pp. 691–8. .10.1016/j.surfcoat.2014.08.015 ↗
25. J. Ikeda, S. Semboshi, A. Iwase, W. Gao, and A. Sugawara: Metall. Mater. Trans., 2015, vol. 56(3), pp. 297–302. .
26. D. Ueyama, S. Semboshi, Y. Saitoh, N. Ishikawa, K. Nishida, N. Soneda, F. Hori, and A. Iwase: Japan J. Appl. Phys., 2014, vol. 53(5S1), p. 05FC04. .10.7567/JJAP.53.05FC04 ↗
27. J.H. Perepezko, T.A. Sossaman, and M. Taylor: J. Therm. Spray Technol., 2017, vol. 26(5), pp. 929–40. .10.1007/s11666-017-0565-2 ↗
28. S.P. Chakraborty, S. Banerjee, I.G. Sharma, and A.K. Suri: J. Nucl. Mater., 2010, vol. 403, pp. 152–9. .10.1016/j.jnucmat.2010.06.014 ↗
29. D. Pye: Practical Nitriding and Ferritic Nitro-Carburizing. 1st ed. ASM International Technical Book, Ohio, 2003, pp. 78–9.10.31399/asm.tb.pnfn.9781627083508 ↗
30. Z.D. Xiang and P.K. Datta: Mater. Sci. Eng. A., 2003, vol. 356, pp. 136–44. .10.1016/S0921-5093(03)00107-2 ↗
31. M. Najafizadeh and M. Ghasempour-Mouziraji: Silicon., 2020, vol. 13, pp. 2233–42. .10.1007/s12633-020-00735-4 ↗
32. Y.A. Balandin and A.S. Kolpakov: Met. Sci. Heat Treat., 2006, vol. 48, pp. 127–30. .10.1007/s11041-006-0056-4 ↗
33. L. Huang, X. Wu, F. Xie, et al.: J. Wuhan Technol. Mater. Sci. Ed., 2017, vol. 32, pp. 245–9. .10.1007/s11595-017-1587-9 ↗
34. P. Cavaliere, A. Perrone, and A. Silvello: J. Comput. Des. Eng., 2016, vol. 3, pp. 71–90. .
35. P. Cavaliere, G. Zavarise, and M. Perillo: Comput. Mater. Sci., 2009, vol. 46, pp. 26–35. .10.1016/j.commatsci.2009.01.024 ↗
36. A. Habibolahzadeh and F. Haftlang: Mater. Res. Express., 2019, vol. 6, p. 096444. .10.1088/2053-1591/ab0ddb ↗
37. M. Najafizadeh, M. Ghasempour-Mouziraji, and D. Zhang: Silicon., 2021, https://doi.org/10.1007/s12633-021-01057-9.10.1007/s12633-021-01057-9 ↗
38. J.Z. Jiang, K. Ståhl, R.W. Berg, D.J. Frost, T.J. Zhou, and P.X. Shi: Europhys. Lett. EPL., 2000, vol. 51(1), pp. 62–7. .10.1209/epl/i2000-00337-8 ↗
39. T. Nishimura, X. Xu, K. Kimoto, N. Hirosaki, and H. Tanaka: Sci. Technol. Adv. Mater., 2007, vol. 8(7–8), p. 635. .10.1016/j.stam.2007.08.006 ↗
40. F. Xie, S. Xu, and J. Pan: Mater. Perf. Charact., 2018, vol. 7(5), pp. 1164–77. .10.1520/MPC20180008 ↗
41. J.Z. Jiang, F. Kragh, D.J. Frost, K. Ståhl, and H. Lindelov: J. Phys. Condens. Matter., 2001, vol. 13(22), p. 515. .10.1088/0953-8984/13/22/111 ↗
42. M. Nakamura, K. Hirao, Y. Yamauchi, and S. Kanzaki: Wear., 2003, vol. 254, pp. 94–102. .10.1016/S0043-1648(02)00293-4 ↗
43. T. Liapina, A. Leineweber, and E.J. Mittemeikier: Scr. Mater., 2003, vol. 48, pp. 1643–8. .10.1016/S1359-6462(03)00136-2 ↗
44. D. Singh, A.M. Gatey, R.S. Devan, V. Antunes, F. Alvarez, C.A. Figueroa, A.A. Joshi, and S.S. Hosmani: Surf. Eng., 2019, vol. 35(3), pp. 205–15. .10.1080/02670844.2018.1516372 ↗
45. Y. Yang, J.H. Guo, M.F. Yan, Y.D. Zhu, Y.X. Zhang, and Y.X. Wang: Surf. Eng., 2018, vol. 34(2), pp. 132–8. .10.1080/02670844.2016.1231863 ↗
46. F. Ashrafizadeh: Surf. Coat. Technol., 2003, vol. 174–175, pp. 1196–200. .10.1016/S0257-8972(03)00460-2 ↗
47. B. Podgornik, B. Zuzek, F. Kafexhiu, and V. Leskovšek: Tribol. Lett., 2016, vol. 63, p. 147. .10.1007/s11249-016-0695-6 ↗
48. J. Pribbenow, M. Mejauschek, P. Landgraf, G. Braüer, and T. Lampke: IOP Conf. Ser. Mater. Sci. Eng., 2019, vol. 480(1), p. 01209. .
49. T.V. Doan, D. Kusmič, M. Pospíchal, and D. Dobrocký: IOP Conf. Ser. Mater. Sci. Eng., 2017, vol. 179(1), p. 012017. .10.1088/1757-899X/179/1/012017 ↗
50. T. Van Doan, D. Kusmič, M. Pospíchal, Q.D. Tran, and V.T. Nguyen: Manuf. Technol., 2017, vol. 17(2), pp. 168–74. .
51. S.R. Anvari, S.M. Monirvaghefi, and M.H. Enayati: Surf. Eng., 2015, vol. 31(9), pp. 693–700. .10.1179/1743294415Y.0000000023 ↗
52. A. Matthews, and A. Leyland, Materials related aspects of nanostructured tribological coatings, In: Martinu L, Bardos L, Shimshock R, editors. Proceedings of the 51st Annual Technology Conference on Society of vacuum coaters. Albuquerque, CO, 2008, pp. 40-45.
53. W. Ni, Y.T. Cheng, M.J. Lukitsch, A.M. Weiner, L.C. Lev, and D.S. Grummon: Appl. Phys. Lett., 2004, vol. 85, pp. 4028–30. .10.1063/1.1811377 ↗
54. M. Naeem, H.A. Raza, M. Shafiq, M. Zaka-ul-Islam, J. Iqbal, J.C. Díaz-Guillén, and M. Zakaullah: Mater. Res. Express., 2017, vol. 4, p. 1107. .
55. I. Milosev, H.H. Strehblow, and B. Navinsek: Surf. Coat. Technol., 1995, vol. 74–75, pp. 897–902. .10.1016/0257-8972(95)08360-X ↗