In-Situ Determination of Precipitation Kinetics During Heat Treatment of Superalloy 718
Source abstract
Abstract
Two in-situ test techniques were used to obtain insight into the isothermal precipitation kinetics of ɣ" and ɣ' in superalloy 718. The first method consisted of measurements of Young's modulus using a dynamic-resonance method (DRM), and the other comprised determination of the evolution of the lattice parameter of the ɣ-matrix phase via neutron diffraction. For both techniques, solution-treated-and-water-quenched samples were heated to a nominal test temperature of 923 K, 953 K, 1013 K, or 1053 K and held for a time of ~ 5 to 50 hours, at the end of which a near-steady condition in terms of an apparently-constant modulus/lattice parameter had been achieved. The observations from each test technique suggested sequential periods of rapid initial increase in volume fraction followed by a gradually-decreasing rate of change. The data were converted to transformed fraction as a function of time and interpreted in terms of phenomenological (JMAK) and mechanistic (nucleation-and-growth) models. From the former approach, Avrami exponents which decreased from approximately unity at the lower two temperatures to ~ 0.5 at the highest temperature, were deduced. The transformed fraction-versus-time behaviors were well replicated using fast-acting numerical simulations based on the mechanistic model. These simulations highlighted the competition between nucleation and growth in determining overall transformation kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. H.L. Eiselstein: in Advances in the Technology of Stainless Steel and Related Alloys, ASTM STP 369, American Society for Testing and Materials, Philadelphia, 1965, pp. 62–79.
2. R.E. Schafrik, D.D. Ward, and J.R. Groh: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 1–11.10.7449/2001/Superalloys_2001_1_11 ↗
3. D. Paulonis and J.J. Schirra: in Superalloys 718, 625, 706, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2001, pp. 13–23.10.7449/2001/Superalloys_2001_13_23 ↗
4. J.A. Heaney, M.L. Lasonde, A.M. Powell, B.J. Bond, and C.M. O’Brien: in Proceedings of 8th International Symposium on Superalloy 718 and Derivatives, E. Ott, A. Banik, X. Liu, I. Dempster, K. Heck, J. Andersson, J. Groh, R. Helmink, and A. Wusatowski-Sarnek, eds., 2014, TMS, Warrendale, PA, pp. 67–77.
5. Proceedings of 9th International Symposium on Superalloy 718 and Derivatives, E. Ott, X. Liu, J. Andersson, Z. Bi, K. Bockenstedt, I. Dempster, J. Groh, K. Heck, P. Jablonski, M. Kaplan, D. Nagahama, and C. Sudbrack, eds., 2018, TMS, Pittsburgh, PA, 2018.
6. Y.C. Fayman: Mater. Sci. Eng., 1987, vol. 92, pp. 159-171.10.1016/0025-5416(87)90166-2 ↗
7. J.W. Brooks and P.J. Bridges: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Mauer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 33–42.10.7449/1988/Superalloys_1988_33_42 ↗
8. A. Oradei-Basile and J.F. Radovich: in Superalloys 718, 625, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
9. C.I. Garcia, D.E. Camus, E.A. Loria, and A.J. DeArdo: in Superalloys 718, 625, and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1991, pp. 925–41.10.7449/1991/Superalloys_1991_925_941 ↗
10. C.I. Garcia, A.K. Lis, E.A. Loria, and A.J. DeArdo: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, pp. 527–36.10.7449/1992/Superalloys_1992_527_536 ↗
11. H. Chandler: Heat Treater’s Guide: Practices and Procedures for Nonferrous Alloys, ASM International, Materials Park, OH, 1996.
12. C. Slama and G. Cizeron: Etude du Comportement Structural de l’Alliage NC 19 Fe Nb (Inconel 718), J. de Physique III, 1997, vol. 7, pp. 665-688.
13. A. Thomas, M. El-Wahabi, J.M. Cabrera, and J.M. Prado: J. Mater. Proc. Technol., vol. 177, 2006, pp. 469-472.10.1016/j.jmatprotec.2006.04.072 ↗
14. R. Cozar and P. Pineau: Metall. Trans., 1973, vol. 4, pp. 47-59.10.1007/BF02649604 ↗
15. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Metall. Trans. A, 1992, vol. 23A, pp. 2015-2028.10.1007/BF02647549 ↗
16. Y.F. Han: M.S. Thesis, University of Manitoba, Winnipeg, Manitoba, Canada, 1981.
17. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, B. Nenchev, J. Zhang, S. Kabra, J.F. Kelleher, and H.B. Dong: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5421-5432.10.1007/s11661-019-05393-9 ↗
18. R. Lawitzki, S. Hassan, L. Karge J. Wagner, D. Wang, J. von Kobylinski, C. Krempaszky, M. Hofmann, R. Gilles, and G. Schmitz: Acta Mater., 2019, vol. 163, pp. 28–39.10.1016/j.actamat.2018.10.014 ↗
19. F. Theska, S.P. Ringer, and S. Primig: Microscopy and Microanalysis, 2019, vol. 25, pp. 470-480.10.1017/S1431927618015611 ↗
20. T.M. Smith, N.M. Senanayake, C.K. Sudbrack, P. Bonacuse, R.B. Rogers, P. Chao, and J. Carter: Mater. Characterization, 2019, vol. 148, pp. 17810.1016/j.matchar.2018.12.018 ↗
21. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, S.Y. Zhang, J. Zhang, and H.B. Dong: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 574-585.10.1007/s11661-019-05536-y ↗
22. A. Niang: Ph.D. Thesis, Université de Toulouse, Toulouse, France, 2010.
23. A. Niang, B. Viguier, and J. Lacaze: Mater. Characterization, 2010, vol. 61, pp. 525-534.10.1016/j.matchar.2010.02.011 ↗
24. K. Wu, F. Zhang, S. Chen, W. Cao, and Y.A. Chang: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrandale, PA, 2008, pp. 933–39.10.7449/2008/Superalloys_2008_933_939 ↗
25. F. Zhang, W. Cao, C. Zhang, S. Chen, J. Zhu, and D. Lv: in Proc. 9th International Symposium on Superalloy 718 and Derivatives, E.A. Ott, ed., TMS, Pittsburgh, PA, 2018, pp. 147–61.10.1007/978-3-319-89480-5_8 ↗
26. A. Drexler, B. Oberwinkler, S. Primig, C. Turk, E. Povoden-Karadeniz, A. Heinemann, W. Ecker, and M. Stockinger: Mater. Sci. Eng. A, 2018, vol. A723, pp. 314-323.10.1016/j.msea.2018.03.013 ↗
27. Z.K. Low, T. Chaise, D. Bardel, S. Cazottes, P. Chaudet, M. Perez, and D. Nelias: Acta Mater., 2018, vol. 156, pp. 31-42.10.1016/j.actamat.2018.06.005 ↗
28. I.J. Moore, M.G. Burke, and E.J. Palmiere: Acta Mater., 2016, vol. 119, pp. 157-166.10.1016/j.actamat.2016.08.027 ↗
29. P. Mazot, J. de Fouquet, J. Woirgard, and J.P. Pautrot : J. de Physique III, 1992, vol. 2, pp. 751-763
30. L. Barboni, G.R. Gillich, C.P. Chioncel, C.O. Hamat, and I.C. Mituletu: in IOP Conf. Series: Mater. Sci. Eng., 2018, vol. 416, paper 012063.10.1088/1757-899X/416/1/012063 ↗
31. G. Leon and H.L. Chen: Vibration, 2019, vol. 2, pp. 157-173.10.3390/vibration2010010 ↗
32. ASTM Standard E1875-13, ASTM Inter., Conshohocken, PA, 2014.
33. P.E. Aba-Perea, T. Pirling, P.J. Withers, J. Kelleher, S. Kabra, and M. Preuss: Mater. And Design, 2016, vol 89, pp. 856-863.10.1016/j.matdes.2015.09.152 ↗
34. S.V. Prikhodko, J.D. Carnes, D.G. Isaak, H. Yang, and A.J. Ardell: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2403-2408.10.1007/s11661-999-0248-9 ↗
35. J. Santisteban, M. Daymond, J. James, and L. Edwards: J. Appl. Crystallogr., 2006, vol. 39, pp. 812–25.10.1107/S0021889806042245 ↗
36. J.W. Christian: The Theory of Transformation in Metals and Alloys, Pergamon Press, Oxford, UK, 2002.
37. M. Akhlaghi, T. Steiner, S.R. Meka, and E.J. Mittemeijer: J. Appl. Crystall., 2016, vol. 49(1), pp. 69-77.10.1107/S1600576715022608 ↗
38. A.N. Kolmogorov: Izv. Akad. Nauk. SSSR, Ser. Materm., 1937, vol. 3, pp. 335–59.
39. W.A. Johnson and R.F. Mehl: Trans. AIME, 1939, vol. 135, pp. 416-443.
40. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103-1112.10.1063/1.1750380 ↗
41. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212-224.10.1063/1.1750631 ↗
42. M. Avrami: J. Chem. Phys., 1941, vol. 9, pp. 177-184.10.1063/1.1750872 ↗
43. R. Wagner and R. Kampmann: in Materials Science and Technology, vol. 5, P. Haasen, ed., VCH, Weinheim, Germany, 1991, pp. 213–303.
44. S.L. Semiatin, J.S. Tiley, F. Zhang, T.M. Smith, R.Y. Zhang, H.B. Dong, P. Gadaud, and J. Cormier: Metall. Mater. Trans. A, 2020 (accepted for publication).
45. D.F. Paulonis, J.M. Oblak, and D.S. Duvall: Trans. ASM, 1969, vol. 62, pp. 611-622.
46. A. Devaux, L. Naze, R. Molins, A. Pineau, A. Organista, J.Y. Guedou, J.F. Uginet, and P. Heritier: Mater. Sci. Eng. A, 2008, vol. A486, pp. 117-122.10.1016/j.msea.2007.08.046 ↗
47. I.J. Moore, M.G. Burke, N.T. Nuhfer, and E.J. Palmiere: J. Mater. Sci., 2017, vol. 52, pp. 8665-8680.10.1007/s10853-017-1091-9 ↗
48. A. Seret, C. Moussa, M. Bernacki, and N. Bozzolo: Acta Mater., 2020, vol. 192, pp. 40-51.10.1016/j.actamat.2020.04.029 ↗
49. L. Mataveli Suave, J. Cormier, P. Villechaise, A. Soula, Z. Hervier, D. Bertheau, and J. Laigo: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 2963–82.10.1007/s11661-014-2256-7 ↗
50. D. Furrer, V. Venkatesh, F. Zhang, D. Gynther, T. Asare, D. Novikov, and S. Burlatsky: in Proc. 8th Inter. Symp. on Superalloy 718 and Derivatives, E. Ott, A. Banik, X. Liu, I. Dempster, K. Heck, J. Andersson, J. Groh, R. Helmink, and A. Wusatowska-Sarnek, eds., 2014, TMS, Warrendale, PA, pp. 81–94.