journal article·2020-05

Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel

Ata Abdi, Hamed Mirzadeh, Mohammad Javad Sohrabi, Meysam Naghizadeh

Publisher page

Abstract

The effects of cold rolling and the subsequent annealing were studied for the AISI 309Si stainless steel. During annealing of cold-rolled sheets, the hardness curve vs temperature showed two regimes of transformations (reversion and recrystallization), where the JMAK analysis revealed that the activation energy of both processes is equal to the lattice diffusion activation energy in austenitic stainless steel. Finally, based on the kinetics analysis, a recrystallization–temperature–time diagram for phase transformations was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. C.C. Hsieh, D.Y. Lin, and T.C. Chang: Mater. Sci. Eng. A, 2008, vol. 475, pp. 128-35.10.1016/j.msea.2007.04.028 ↗
2. W. Ye, Y. Li, and F. Wang: Electrochim. Acta, 2006, vol. 51, pp. 4426-32.10.1016/j.electacta.2005.12.034 ↗
3. R.L. Plaut, C. Herrera, D.M. Escriba, P.R. Rios, and A.F. Padilha: Mater. Res., 2007, vol. 10, pp. 453-60.10.1590/S1516-14392007000400021 ↗
4. A. Paúl, R. Sanchez, O.M. Montes, and J.A. Odriozola: Oxid. Met., 2007, vol. 67, pp. 87-105.10.1007/s11085-006-9046-6 ↗
5. S.N. Basu and G.J. Yurek: Oxid. Met., 1991, vol. 36, pp. 281-315.10.1007/BF00662967 ↗
6. K. Nohara, Y. Ono, and N. Ohashi: Tetsu To Hagane, 1977, vol. 63, pp. 772-82.10.2355/tetsutohagane1955.63.5_772 ↗
7. J.A. Lichtenfeld, C.J. Van Tyne, and M.C. Mataya: Metall. Mater. Trans. A, 2006, vol. 37, pp. 147-61.10.1007/s11661-006-0160-5 ↗
8. W.B. Qin, J.S. Li, and Y.S. Li: Mater. Lett., 2019, vol. 254, pp. 116-9.10.1016/j.matlet.2019.07.058 ↗
9. G. Sun, L. Du, J. Hu, B. Zhang, and R.D.K. Misra: Mater. Sci. Eng. A, 2019, vol. 746, pp. 341-55.10.1016/j.msea.2019.01.020 ↗
10. A. Amininejad, R. Jamaati, and S.J. Hosseinipour: Mater. Sci. Eng. A, 2019, vol. 767, pp. 138433.10.1016/j.msea.2019.138433 ↗
11. S. Wang, K. Wei, J. Li, Y. Liu, Z. Huang, Q. Mao, and Y. Li: Mater. Lett., 2019, vol. 236, pp. 342-5.10.1016/j.matlet.2018.10.080 ↗
12. A. Sarkar, S. Sanyal, T.K. Bandyopadhyay, and S. Mandal: Mater. Sci. Tech., 2019, vol. 35, pp. 2054-68.10.1080/02670836.2018.1560987 ↗
13. K.D. Ralston and N. Birbilis: Corrosion, 2010, vol. 66, pp. 075005.10.5006/1.3462912 ↗
14. B. Fultz and J. Howe: Transmission electron microscopy and diffractometry of materials, 3rd ed., Springer, Berlin, 2008.
15. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2248-56.10.1007/s11661-018-4583-6 ↗
16. S. Kheiri, H. Mirzadeh, and M. Naghizadeh: Mater. Sci. Eng. A, 2019, vol. 759, pp. 90-6.10.1016/j.msea.2019.05.028 ↗
17. M. Naghizadeh, H. Mirzadeh, Metall. Mater. Trans. A, 2016, vol. 47, pp. 4210-6.10.1007/s11661-016-3589-1 ↗
18. A. Kisko, A.S. Hamada, J. Talonen, D. Porter, and L.P. Karjalainen: Mater. Sci. Eng. A, 2016, vol. 657, pp. 359-70.10.1016/j.msea.2016.01.093 ↗
19. P. Behjati, A. Kermanpur, L.P. Karjalainen, A. Järvenpää, M. Jaskari, H. SamaeiBaghbadorani, A. Najafizadeh, and A. Hamada: Mater. Sci. Eng. A, 2016, vol. 650, pp. 119-28.10.1016/j.msea.2015.09.069 ↗
20. H.J. Frost and M.F. Ashby: Deformation-Mechanism maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
21. H. Mirzadeh, J.M. Cabrera, and A. Najafizadeh: Acta Mater., 2011, vol. 59, pp. 6441-8.10.1016/j.actamat.2011.07.008 ↗
22. H. Mirzadeh: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4027-4037.10.1007/s11661-015-3006-1 ↗
23. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177-89.10.1016/S1359-6454(02)00260-4 ↗
24. K. Tomimura, S. Takaki, and Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431-1437.10.2355/isijinternational.31.1431 ↗
25. J.W. Christian: The Theory of Transformations in Metals and Alloys, Part 1, 3rd ed., Pergamon Press, Oxford, 2002.
26. D. Hernández-Silva, R.D. Morales, and J.G. Cabañas-Moreno: ISIJ Int., 1992, vol. 32, pp. 1297-305.10.2355/isijinternational.32.1297 ↗
27. M. Tavakoli, H. Mirzadeh, and M. Zamani: Mater. Sci. Tech., 2019, vol. 35, pp. 1932-41.10.1080/02670836.2019.1655862 ↗