journal article·2019-09-15

Effect of Hydrogen on the Substructure of Lenticular Martensite in Fe-31Ni Alloy

Akinobu Shibata, Masanori Enoki, Nahoko Saji, Hirotaka Tai, Motomichi Koyama, Hiroshi Ohtani, Nobuhiro Tsuji, Kaneaki Tsuzaki

Publisher page

Abstract

This study investigated the effect of hydrogen on the substructure of martensite in Fe-31Ni alloy. In both the hydrogen-charged and uncharged specimens, typical lenticular martensite plates formed after subzero cooling. However, we found that the fraction of twinned region (including the area of midrib) in lenticular martensite plate increased with increasing hydrogen content. In addition, the width of individual twins in the hydrogen-charged specimen was slightly smaller than that in the uncharged specimen. These results indicated that the existence of hydrogen facilitated twinning deformation as a lattice invariant deformation. We presented a comprehensive discussion about the reason why hydrogen enhanced twinning deformation. Even though tetragonality of martensite in the hydrogen-charged specimen could not be confirmed by X-ray diffraction, the transmission electron microscopy observations and the first-principles calculations suggested that hydrogen might increase the tetragonality of martensite. We proposed that solid solution hardening and an increase in the tetragonality of martensite by the existence of hydrogen were the possible reasons for facilitating twinning deformation as a lattice invariant deformation in martensitic transformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 1.S.P. Lynch: Acta Metall., 1984, vol. 32, pp. 79–90.10.1016/0001-6160(84)90204-9 ↗
2. 2.I.A. Robertson, P. Sofronis, A. Nagao, M.L. Martin, S. Wang, D.W. Gross, and K.E. Nygren: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 1085–1103.10.1007/s11663-015-0325-y ↗
3. 3.M. Dadfarnia, A. Nagao, S. Wang, M.L. Martin, B.P. Somerday, and P. Sofronis: Int. J. Fract., 2015, vol. 196, pp. 223–43.10.1007/s10704-015-0068-4 ↗
4. 4.J.P. Hirth: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
5. 5.P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Mater., 1998, vol. 46, pp. 1749–57.10.1016/S1359-6454(97)00349-2 ↗
6. 6.I.M. Robertson: Eng. Fract. Mech., 1999, vol. 64, pp. 649–73.10.1016/S0013-7944(99)00094-6 ↗
7. 7.P. Sofronis and I.M. Robertson: Philos. Mag. A, 2002, vol. 82, pp. 3405–13.10.1080/01418610208240451 ↗
8. 8.M. Tanino, H. Komatsu, and S. Fukai: Phys. Colloq., 1982, vol. 43 (C4), pp. 503–08.
9. 9.M.L. Martin, J.A. Fenske, G.S. Liu, P. Sofronis, and I.M. Robertson: Acta Mater., 2011, vol. 59, pp. 1601–06.10.1016/j.actamat.2010.11.024 ↗
10. 10.Y.H. Kim and J.W. Morris, Jr.: Metall. Trans. A, 1983, vol. 14A, pp. 1883–88.10.1007/BF02645559 ↗
11. 11.Y.H. Kim, H.J. Kim, and J.W. Morris, Jr.: Metall. Trans. A, 1986, vol. 17A, pp. 1157–64.10.1007/BF02665314 ↗
12. 12.A. Nagao, C.D. Smith, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2012, vol. 60, pp. 5182–89.10.1016/j.actamat.2012.06.040 ↗
13. 13.A. Shibata, T. Murata, H. Takahashi, T. Matsuoka, and N. Tsuji: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5685–96.10.1007/s11661-015-3176-x ↗
14. 14.Q. Yang and J.L. Luo: Mater. Sci. Eng. A, 2000, vol. A238, pp. 75–83.10.1016/S0921-5093(00)00833-9 ↗
15. 15.Y. Murakami, T. Kanezaki, Y. Mine, and S. Matsuoka: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1327–39.10.1007/s11661-008-9506-5 ↗
16. 16.T. Kanezaki, C. Narazaki, Y. Mine, S. Matsuoka, and Y. Murakami: Int. J. Hydrogen Energy, 2008, vol. 33, pp. 2604–19.10.1016/j.ijhydene.2008.02.067 ↗
17. 17.T. Maki: Mater Sci. Forum, 1990, vols. 56–58, pp. 157–68.10.4028/www.scientific.net/MSF.56-58.157 ↗
18. 18.R.L. Patterson and C.M. Wayman: Acta Metall., 1966, vol. 14, pp. 347–69.10.1016/0001-6160(66)90094-0 ↗
19. 19.A. Shibata, S. Morito, T. Furuhara, and T. Maki: Scripta Mater., 2005, vol. 53, pp. 597–602.10.1016/j.scriptamat.2005.04.023 ↗
20. 20.A. Shibata, S. Morito, T. Furuhara, and T. Maki: Acta Mater., 2009, vol. 57, pp. 483–92.10.1016/j.actamat.2008.09.030 ↗
21. K.D. Zilnyk, D.R. A. Junior, H.R.Z. Sandim, P.R. Rios, and D. Raabe: Acta Mater., 2018, vol. 143, pp. 227–36.10.1016/j.actamat.2017.10.026 ↗
22. 22.H.J Neuhauser and W. Pitsch: Acta Metall., 1971, vol. 19, pp. 337–44.10.1016/0001-6160(71)90101-5 ↗
23. 23.T. Kakeshita, K. Shimizu, T. Maki, and I. Tamura: Scripta Metall., 1980, vol. 14, pp. 1067–70.10.1016/0036-9748(80)90207-0 ↗
24. 24.A. Shibata, T. Murakami, S. Morito, T. Furuhara, and T. Maki: Mater. Trans., 2008, vol. 49, pp. 1242–48.10.2320/matertrans.MRA2007296 ↗
25. 25.M. Koyama, T. Ogawa, D. Yan, Y. Matsumoto, C.C. Tasan, K. Takai, and K. Tsuzaki: Int. J. Hydrogen Energy, 2017, vol. 42, pp. 26423–26435.10.1016/j.ijhydene.2017.08.209 ↗
26. 26.G. Kresse and J. Furthmüller: Phys. Rev. B, 1996, vol. 54, pp. 11169–11186.10.1103/PhysRevB.54.11169 ↗
27. 27.G. Kresse and D. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
28. 28.P.E. Blöchl: Phys. Rev. B, 1994, vol. 50, pp. 17953–17979.10.1103/PhysRevB.50.17953 ↗
29. 29.H.C. Herper, E. Hoffmann, and P. Entel: Phys. Rev. B, 1999, vol. 60, pp. 3839–48.10.1103/PhysRevB.60.3839 ↗
30. 30.H. Ohtsuka, V.A. Dinh, T. Ohno, K. Tsuzaki, K. Tsuchiya, R. Sahara, H. Kitazawa, and T. Nakamura: ISIJ Int., 2015, vol. 55, pp. 2483–91.10.2355/isijinternational.ISIJINT-2015-276 ↗
31. R.F. Bunshah and R.F. Mehl: Trans. AIME, 1953, vol. 197, pp. 1251–58.
32. 32.H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176A, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
33. 33.Y. Tobe and W.R. Tyson: Scripta Metall., 1977, vol. 11, pp. 849–52.10.1016/0036-9748(77)90335-0 ↗
34. 34.M. Umemoto, K. Minoda, and I. Tamura: Metallography, 1982, vol. 15, pp. 177–91.10.1016/0026-0800(82)90021-0 ↗
35. 35.T. Maki, S. Shimooka, S. Fujiwara, and T. Tamura: Trans. JIM, 1975, vol. 16, pp. 35–41.10.2320/matertrans1960.16.35 ↗
36. 36.S. Kajiwara and W.S. Owen: Scripta Metall., 1977, vol. 11, pp. 137–42.10.1016/0036-9748(77)90293-9 ↗
37. 37.R.G. Davies and C.L. Magee: Metall. Trans., 1970, vol. 1, pp. 2927–31.10.1007/BF03037832 ↗
38. 38.C.L. Magee and R.G. Davies: Acta Metall., 1972, vol. 20, pp. 1031–43.10.1016/0001-6160(72)90137-X ↗
39. 39.A. Shibata, H. Yonezawa, K. Yabuuchi, S. Morito, T. Furuhara, and T. Maki: Mater. Sci. Eng. A, 2006, vols. 438–440, pp. 241–45.10.1016/j.msea.2005.12.044 ↗
40. 40.M. Koyama, Y. Abe, K. Saito, E. Akiyama, K. Takai, and K. Tsuzaki: Scripta Mater., 2016, vol. 122, pp. 50–53.10.1016/j.scriptamat.2016.05.012 ↗
41. T. Maki and C.M. Wayman: Proc. 1st JIM Int. Symp. on New Aspects of Martensitic Transformation, Suppl. Trans. JIM, 1976. vol. 17, pp. 69–74.
42. 42.Z. Nishiyama: Martensitic Transformation, Academic Press, Inc., New York, NY, 1978, pp. 2–6.