Composition Gradient and Particle Deformed Zone: An Emerging Correlation
Source abstract
Abstract
Compressive ductility of the as-cast AA7075 was nearly doubled by hot compression and by appropriate homogenization treatment. The latter dissolved the 2nd phase, and introduced compositional gradients around the ‘surviving’ precipitates. Direct observations, through split channel die compression, revealed a correlation between particle deformed zone (PDZ: deformed aluminum matrix surrounding coarse 2nd phase particle), the composition gradient and the working temperature. Local misorientation in the PDZ reduced, remarkably, with the introduction of composition gradient and higher working temperature. The generation of PDZ, especially the influence of the composition gradient and the working temperature, was modeled successfully with discrete dislocation dynamics (DDD). More importantly, tailoring the composition gradients around the second phase brought out clear technological possibility of improving the as-cast compressive ductility without sacrificing the particle content and the compressive strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 1. Eskin DG (2008) Physical metallurgy of direct chill casting of aluminum alloys. CRC Press, Boca Raton10.1201/9781420062823 ↗
2. 2. Campbell J (2003) Castings: the new metallurgy of cast metals, Second edition. Butterworth-Heinemann Press, Oxford
3. 3. Hatch JE (1984) Aluminum properties and physical metallurgy, Second edition. ASM, Aluminium
4. J. Grandfield,D.G. Eskin and I. Bainbridge,Direct-Chill Casting of Light Alloys: Science and Technology, 2013, The Minerals, Metals & Materials Society, Orlando10.1002/9781118690734 ↗
5. 5. Nadella R, Eskin DG, Du Q, Katgerman L (2008) Progress in Materials Science. 53:421-48010.1016/j.pmatsci.2007.10.001 ↗
6. 6. Lalpoor M, Eskin D, Katgerman L (2008) Materials Science and Engineering A 186:186-19410.1016/j.msea.2008.06.047 ↗
7. 7. Kaufman JG, Rooy EL (2004) Aluminum Alloy Castings: Properties, Processes, and Applications. ASM International, Ohio10.31399/asm.tb.aacppa.9781627083355 ↗
8. 8. Lalpoor M, Eskin DG, Katgerman L (2000) Metall. Mater. Trans. A 40:3304–331310.1007/s11661-009-0031-y ↗
9. 9. Fgaer HG, Mo A (1990) Metall Trans B 21B:1049-1061
10. 10. Drezet JM, Rappaz M (1996) Metall Mater Trans A 27:3214-322510.1007/BF02663872 ↗
11. 11. Drezet JM, Phillion AB (2010) Metall. Mater. Trans. A 41A:3396-340410.1007/s11661-010-0424-y ↗
12. 12. Wang Q.G., Apelian D., Lados D.A. (2001) J. Light Metals 1:73-8410.1016/S1471-5317(00)00008-0 ↗
13. 13. Eskin D.G., Suyitno, Katgerman L (2004) Progr. Mater. Sci. 49:629-71110.1016/S0079-6425(03)00037-9 ↗
14. 14. Luo A.G., Pekguleryuz M.O. (1994) J. Mater. Sci. 29:5259-527110.1007/BF01171534 ↗
15. 15. Fisher J, Hart EW, Pry R (1953) Acta Metall. 1:336-3910.1016/0001-6160(53)90109-6 ↗
16. 16. Embury J.D., Nicholson R. (1963) Acta Metall. 11:347-35410.1016/0001-6160(63)90159-7 ↗
17. 17. McGrath JT, Bratina WJ (1967) Acta Metall. 15:329-33910.1016/0001-6160(67)90209-X ↗
18. 18. Ardell A.J. (1985) Metall Trans A 16:2131–216510.1007/BF02670416 ↗
19. 19. Messerschmidt U, Bartsch M (1993) Mater. Sci. Eng: A 164(1-2):332-33910.1016/0921-5093(93)90688-B ↗
20. 20. Li BQ, Wawner FE (1998) Acta Mater. 46:5483-549010.1016/S1359-6454(98)00188-8 ↗
21. 21. Gladman T (1999) Mater. Sci. Technol. 15:30-3610.1179/026708399773002782 ↗
22. 22. Huang KE, Marthinsen K, Zhao Q, Logé RE (2018) Progr. Mater. Sci. 92:284-35910.1016/j.pmatsci.2017.10.004 ↗
23. 23. Takahashi A, Ghoniem NM (2008) J. Mech. Phys. Solids 56(4):1534-155310.1016/j.jmps.2007.08.002 ↗
24. 24. Williams R. O. (1957) Acta Metall. 5:241-24410.1016/0001-6160(57)90096-2 ↗
25. J. Douin, P. Donnadieu, and F. Houdellier, Mater. Sci. Eng. A, 2001, Vol. 319–321, pp 270–73.10.1016/S0921-5093(01)01103-0 ↗
26. 26. Ashby M (1966) Philos. Mag. 14:1157-117810.1080/14786436608224282 ↗
27. 27. Humphreys F.J., Hatherly M. (2012) Recrystallization and related annealing phenomena. Elsevier, Oxford
28. 28. Humphreys F., Kalu P. (1987) Acta Metall. 35:2815-282910.1016/0001-6160(87)90281-1 ↗
29. 29. Humphreys F., Ardakani M.G. (1994) Acta Metall. 42:749-76110.1016/0956-7151(94)90272-0 ↗
30. 30. Vanhoutte P. (1995) Acta Metall. 43:2859-287910.1016/0956-7151(94)00479-2 ↗
31. 31. Orsund R., Hjelen J., Nes E. (1989) Scripta Metall. 23:1193-119810.1016/0036-9748(89)90325-6 ↗
32. 32. Mondal C., Mukhopadhyay A.K. (2005) Mater. Sci. Eng. A 391:367-37610.1016/j.msea.2004.09.013 ↗
33. 33. Panchanadeeswaran S., Doherty R., Becker R. (1996) Acta Mater. 44:1233-126210.1016/1359-6454(95)00186-7 ↗
34. 34. Singh J., Mahesh S., Kumar G., Pant P., Srivastava D., Dey G., Saibaba N., Samajdar I. (2015) Metall. Mater. Trans. A 46:5058-507110.1007/s11661-015-3085-z ↗
35. 35. Keskar N., Mukherjee S., Krishna K.M., Srivastava D., Dey G., Pant P., Doherty R., Samajdar I. (2014) Acta Mater. 69:265-27410.1016/j.actamat.2014.01.023 ↗
36. Standard, A. S. T. M. “E9 (2009) Standard test methods of compression testing of metallic materials at room temperature.” ASTM International, West Conshohocken, PA,2003.
37. 37. Nayan N., Murty S.V.S., Gotving RRR, Mittal M.C., Sinha P.P. (2009) Metal Sci. Heat Treat. 51:7–810.1007/s11041-009-9178-9 ↗
38. 38. Edelson B. I., Baldwin W. M. (1962) ASM Trans. 55:230-50
39. 39. Verlinden B., DriverJ., Samajdar I., Doherty R.D. (2007) Thermo-Mechanical Processing of Metallic Materials. Elsevier, Amsterdam
40. 40. Manwatkar S. K., Srinath J., Narayana Murty S. V. S., Ramesh Narayanan P., Sharma S. C., Venkitakrishnan P. V. (2016) J. Fail. Anal. Preven. 16:1141-114910.1007/s11668-016-0203-1 ↗
41. 41. Karamched P.S., Wilkinson A.J. (2011) Acta Mater. 59:263-27210.1016/j.actamat.2010.09.030 ↗
42. 42. Shin C.S., Fivel M.C., Verdier M., Oh K.H. (2003) Philos. Mag. 83:3691-370410.1080/14786430310001599379 ↗
43. 43. Takahashi A., Ghoniem N.M. (2008) J. Mech. Phys. Solids 56:1534-155310.1016/j.jmps.2007.08.002 ↗
44. 44. Lehtinen A., Granberg F, Laurson L, Nordlund K (2016) Phys. Rev. E 93(1-9):01330910.1103/PhysRevE.93.013309 ↗
45. 45. Benzerga A. A., Brechet Y., Needleman A., Van der Giessen E, (2004) Modell. Simul. Mater. Sci. Eng. 12:159–19610.1088/0965-0393/12/1/014 ↗
46. Giessen E., Needleman RRR (1995) Modell. Simul. Mater. Sci. Eng. 3:689-73510.1088/0965-0393/3/5/008 ↗
47. Groh, S., Marin, E. B., Horstmeyer, M. F., Zbib, H., 2009.International Journal of Plasticity 25, 1456-14.10.1016/j.ijplas.2008.11.003 ↗