A Comparative Study of Kinetic Models Regarding Bainitic Transformation Behavior in Carburized Case Hardening Steel 20MnCr5
Source abstract
Abstract
Isothermal bainite transformation kinetics have been carried out and evaluated for the case hardening steel 20MnCr5 with the carbon content ranging between 0.2 and 0.8 wt pct in a wide span of isothermal temperatures. Multiple austenitization temperatures were chosen to investigate the effect of austenitic grain coarsening on the effect of transformation kinetics. Three well-known transformation kinetic equations were evaluated on more than 60 transformation curves, the Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation, the Austin–Rickett (AR) equation, as well as an autocatalytic (AC) model proposed by van Bohemen. In terms of fit quality, the AR kinetic is superior, although all models show a good accordance with experimental data. The results demonstrate that the interpretability of overall activation energies can be highly ambiguous. Also, an increase for the growth exponent of JMAK/AR equations was found with a scatter of values between 1.5–4.5 and 2.0–6.0, respectively. This finding demonstrates that the value of the growth exponent cannot be interpreted in terms of growth dimension of the bainitic subunits. Furthermore, the kinetic model on a diffusionless approach was evaluated, and the activation energies were compared to work from van Bohemen. Due to the consideration of the grain size on the delay of transformation a surprisingly constant OAE was evaluated for every alloy irrespective of the austenitization temperature. Also, found OAE values are close to findings by van Bohemen with approx. 190 to 200 kJ/mol. Finally, an exponential dependency of the autocatalytic factor with respect to carbon content was proposed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. M. Avrami, The Journal of Chemical Physics 7(12), 1103–1112 (1939)10.1063/1.1750380 ↗
2. J.B. Austin, R.L. Rickett, Trans. Am. Inst. Min. Eng. 135, 396 (1939)
3. E.J. Mittemeijer, Journal of Materials Science 27(15), 3977–3987 (1992)10.1007/BF01105093 ↗
4. D. Quidort, Y. Bréchet, Scripta Materialia 47(3), 151–156 (2002)10.1016/S1359-6462(02)00121-5 ↗
5. M. Umemoto, K. Horiuchi, I. Tamura, Tetsu-to-Hagane 68(3), 461–470 (1982)10.2355/tetsutohagane1955.68.3_461 ↗
6. N.V. Luzginova, L. Zhao, J. Sietsma, Materials Science and Engineering: A 481–482, 766–769 (2008)10.1016/j.msea.2006.11.173 ↗
7. T. Sourmail, V. Smanio, Acta Materialia 61(7), 2639–2648 (2013)10.1016/j.actamat.2013.01.044 ↗
8. F. Caballero, M.J. Santofimia, C. Garcia de Andres, Materials Transactions 45(12), 3272–3281 (2004)10.2320/matertrans.45.3272 ↗
9. M. Kang, M. Zhang, F. Liu, M. Zhu, Materials Transactions 50(1), 123–129 (2009)10.2320/matertrans.MRA2008194 ↗
10. P. Vasudevan, L.W. Graham, H.J. Axon, J. Iron Steel Inst 1958(190), 386 (1958)
11. S.V. Radcliffe, E.C. Rollason, J. Iron Steel Inst. 191, 56 (1959)
12. D.G. Yu, D.K. Shi, Institution of EMES (China Machine Press, Wuhan, 1996), p. 105
13. J. Barford: J. Iron Steel Inst., 1996, vol. 204, p. 609.
14. A. Borgenstam and M. Hillert: Acta Mater., 1997, vol. 45, p. 651.10.1016/S1359-6454(96)00186-3 ↗
15. H. Li, K. Gai, L. He, C. Zhang, H. Cui, M. Li, Materials & Design 92, 731–741 (2016)10.1016/j.matdes.2015.12.110 ↗
16. H.E. Kissinger, Analytical Chemistry 29(11), 1702–1706 (1957)10.1021/ac60131a045 ↗
17. S.F. Medina, P. Fabregue, Journal of Materials Science 26(20), 5427–5432 (1991)10.1007/BF02403940 ↗
18. M. Hillert, Acta Metallurgica 7(10), 653–658 (1959)10.1016/0001-6160(59)90141-5 ↗
19. H. Bhadeshia, A.R. Waugh, Acta Metallurgica 30(4), 775–784 (1982)10.1016/0001-6160(82)90075-X ↗
20. M.J. Santofimia, F.G. Caballero, C. Capdevila, C. García-Mateo, C.G. Andrés, Materials Transactions 47(10), 2465–2472 (2006)10.2320/matertrans.47.2465 ↗
21. G.I. Rees, H.K.D.H. Bhadeshia, Materials Science and Technology 8(11), 994–1003 (2013)10.1179/mst.1992.8.11.994 ↗
22. S.B. Singh: Ph.D Thesis, University of Cambridge, 1998.
23. H. Matsuda, H.K.D.H. Bhadeshia, Proceedings of the Royal Society A: Mathematical. Physical and Engineering Sciences 460(2046), 1707–1722 (2004)10.1098/rspa.2003.1225 ↗
24. S.M.C. van Bohemen, J. Sietsma, International Journal of Materials Research 99(7), 739–747 (2008)10.3139/146.101695 ↗
25. A.M. Ravi, J. Sietsma, M.J. Santofimia, Acta Materialia 105, 155–164 (2016)10.1016/j.actamat.2015.11.044 ↗
26. M.J. Santofimia, F.G. Caballero, C. Capdevila, C. Garcıa de Andrés, C. García-Mateo, Materials Transactions 47(6), 1492–1500 (2006)10.2320/matertrans.47.1492 ↗
27. E. Pereloma, D.V. Edmonds, Phase Transformations in Steels: Fundamentals and Diffusion-controlled Transformations (Woodhead Pub Ltd, Oxford, 2016)
28. H.K.D.H. Bhadeshia, J.W. Christian, Metallurgical Transactions A 21(3), 767–797 (1990)10.1007/BF02656561 ↗
29. D. Quidort, Y. Brechet, ISIJ International 42(9), 1010–1017 (2002)10.2355/isijinternational.42.1010 ↗
30. H. Bhadeshia, Scripta Metallurgica 21(11), 1605–1609 (1987)10.1016/0036-9748(87)90311-5 ↗
31. H.K.D.H. Bhadeshia: J. Phys. Colloques, 1982, vol. 43(C4), pp. C4-443–C4-448.10.1051/jphyscol:1982468 ↗
32. H.I. Aaronson, W.T. Reynolds, G.R. Purdy, Metall. Mater. Trans. A 35(4), 1187–1210 (2004)10.1007/s11661-004-0294-2 ↗
33. F. Liu, F. Sommer, C. Bos, E.J. Mittemeijer, International Materials Reviews 52(4), 193–212 (2013)10.1179/174328007X160308 ↗
34. J. Yang, W.E. Wood, J. Dehaven and M. Li: Heat Treating Proceedings of the 18th Conference, pp. 476–483, 1998.
35. M.J. Starink, Journal of Materials Science 32(15), 4061–4070 (1997)10.1023/A:1018649823542 ↗
36. C. Magee: Phase Transformations, American Society of Metals, Metals Park, OH, 1970, p. 115.
37. E. Kozeschnik, J. Svoboda, P. Fratzl, F.D. Fischer, Materials Science and Engineering: A 385(1–2), 157–165 (2004)
38. J. Svoboda, F.D. Fischer, P. Fratzl, E. Kozeschnik, Materials Science and Engineering: A 385(1–2), 166–174 (2004)
39. H.K.D.H. Bhadeshia: Bainite in Steels, Institute of Materials, London, 1992.
40. D.P. Koistinen, R.E. Marburger, Acta Metallurgica 7(1), 59–60 (1959)10.1016/0001-6160(59)90170-1 ↗
41. A.M. Ravi, J. Sietsma, M.J. Santofimia, Scripta Materialia 140, 82–86 (2017)10.1016/j.scriptamat.2017.06.051 ↗
42. K. Tsuzaki, C. Nakao, T. Maki, Materials Transactions 32(8), 658–666 (1991)10.2320/matertrans1989.32.658 ↗
43. H.K.D.H. Bhadeshia, Progress in Materials Science 57(2), 268–435 (2012)10.1016/j.pmatsci.2011.06.002 ↗
44. D. Kaiser, B. de Graaff, S. Dietrich, V. Schulze, Thermochimica Acta 646, 8–15 (2016)10.1016/j.tca.2016.10.014 ↗
45. C. Garcıa de Andrés, M. Bartolomé, C. Capdevila, D. San Martın, F. Caballero, V. López, Materials Characterization 46(5), 389–398 (2001)10.1016/S1044-5803(01)00142-5 ↗
46. C. Garcıa de Andrés, F. Caballero, C. Capdevila, D. San Martın, Materials Characterization 49(2), 121–127 (2002)10.1016/S1044-5803(03)00002-0 ↗
47. J. Orlich, A. Rose, P. Wieast, Materialwissenschaft und Werkstofftechnik 6(6), 215 (1975)
48. W. Köhler, Materials and Corrosion 6(12), 612 (1955)10.1002/maco.19550061217 ↗
49. S. van Bohemen, Philosophical Magazine 93(4), 388–408 (2013)10.1080/14786435.2012.721570 ↗
50. S. van Bohemen, Metallurgical and Materials Transactions A 41(2), 285 (2009)
51. J. Kučera, K. Stránský, Materials Science and Engineering 52(1), 1–38 (1982)10.1016/0025-5416(82)90067-2 ↗