Effect of Carbon Nanotube (CNT) Length on the Mechanical Milling of Ni-CNT Powders and Ni-CNT/Al Reactive Synthesis
Source abstract
Abstract
The present paper investigates the effect of carbon nanotube (CNT) length (including the use of short multi-wall CNTs) and milling parameters on the nickel matrix crystal size, dislocation density, micro-strain, and CNT integrity post milling of mechanically milled Ni-CNT composite powder. Results show that CNT integrity is independent of CNT length post milling and short CNTs interact differently during milling resulting in more refined matrix microstructures, increased strain and dislocation density within the milled Ni-CNT powders compared with longer CNTs. The Ni-CNT powders were also preliminarily investigated as precursors in the reactive processing of nickel aluminide-CNT composites. Compacts with short CNTs resulted in better reaction characteristics producing composites with more Ni3Al content and greater hardness than reacted compacts with larger CNTs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. A. Esawi and K. Morsi: Compos. Part A Appl. Sci. Manuf., 2007, vol. 38, pp. 646–50.10.1016/j.compositesa.2006.04.006 ↗
2. H. Liu, R. Hu, M. Zeng, J. Liu, and M. Zhu: J. Mater. Chem., 2012, vol. 22, pp. 8022–8.10.1039/c2jm15926k ↗
3. L. Ouyang, Z. Cao, H. Wang, R. Hu, and M. Zhu: J. Alloys Compd., 2017, vol. 691, pp. 422–35.10.1016/j.jallcom.2016.08.179 ↗
4. S.R. Bakshi, D. Lahiri, and A. Agarwal: Int. Mater. Rev., 2010, vol. 55, pp. 41–64.10.1179/095066009X12572530170543 ↗
5. B. Chen, J. Shen, X. Ye, L. Jia, S. Li, J. Umeda, M. Takahashi, and K. Kondoh: Acta Mater., 2017, vol. 140, pp. 317–25.10.1016/j.actamat.2017.08.048 ↗
6. S. Gharegozloo and H. Abdizadeh: Adv. Mater. Res., 2014, vol. 829, pp. 515–9.10.4028/www.scientific.net/AMR.829.515 ↗
7. S. Gharegozloo: RSC Adv., 2016, vol. 6, pp. 47072–82.10.1039/C6RA03052A ↗
8. T. Borkar, J. Hwang, J.Y. Hwang, T.W. Scharf, J. Tiley, S.H. Hong, and R. Banerjee: J. Mater. Res., 2014, vol. 29, pp. 761–9.10.1557/jmr.2014.53 ↗
9. K. Morsi, S. Shinde, and E.A. Olevsky: J. Mater. Sci., 2006, vol. 41, pp. 5699–703.10.1007/s10853-006-0068-x ↗
10. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–184.10.1016/S0079-6425(99)00010-9 ↗
11. M.G. Suryanarayana and C. Norton: in X-Ray Diffraction: A Practical Approach, Plenum Press, New York, 1998, pp. 207–21.10.1007/978-1-4899-0148-4_3 ↗
12. A.C. Langford and J.I. Wilson: J. Appl. Crystallogr., 1978, vol. 11, pp. 102–13.10.1107/S0021889878012844 ↗
13. M. Mhadhbi, M. Khitouni, M. Escoda, L. Sunol, J. J. Dammak: J. Nanomater., 2010, vol. 2010, pp. 1–8.10.1155/2010/712407 ↗
14. K.H. Smallman, R. E., Westmacott: Philos. Mag., 1957, vol. 2, pp. 669–83.10.1080/14786435708242709 ↗
15. R.E. Williamson, G. K., Smallman: Philos. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
16. K. Morsi, A.M.K. Esawi, P. Borah, S. Lanka, and A. Sayed: J. Compos. Mater., 2010, vol. 44, pp. 1991–2003.10.1177/0021998310361990 ↗
17. S. Azadehranjbar, F. Karimzadeh, and M.H. Enayati: Adv. Powder Technol., 2012, vol. 23, pp. 338–42.10.1016/j.apt.2011.04.013 ↗
18. R.A. DiLeo, B.J. Landi, and R.P. Raffaelle: J. Appl. Phys., 2007, vol. 101, pp. 1–6.10.1063/1.2712152 ↗
19. J.R. Simpson, J.A. Fagan, M.L. Becker, E. K. Hobbie, and A.R.H. Walker: Carbon N. Y., 2009, vol. 47, pp. 3238–41.10.1016/j.carbon.2009.07.037 ↗
20. R. Saito: New J. Phys., 2003, vol. 5, pp. 1–157.10.1088/1367-2630/5/1/157 ↗
21. R.M. German: Liquid Phase Sintering, Springer US, 2013.
22. K. Morsi: Int. J. Self-Propagating High-Temperature Synth., 2017, vol. 26, pp. 199–209.10.3103/S1061386217030037 ↗
23. S.V.N. Rao, P.V.M. Murthy, K.S. Suryanarayana, and S.V. Naidu: Mater. Lett., 1992, vol. 14, pp. 281–84.10.1016/0167-577X(92)90037-K ↗
24. G. V. Samsonov, ed.: in Handbook of the physicochemical properties of the elements, IFI-Plenum, New York, 1968.